A molecularly imprinted polymer for the determination of neopterin

A molecularly imprinted polymer (MIP) for the specific retention of neopterin has been developed. A set of 6 polymers was prepared by radical polymerization under different experimental condition using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker, with the aim to understand their influence on the efficiency of the MIP. The performance of each MIP was tested in batch experiments via their binding capacity. The MIP prepared in the presence of nickel ions in dimethylsulfoxide-acetonitrile mixture (P4) exhibited the highest binding capacity for neopterin (260 μmol per gram of polymer). A selectivity study with two other pteridines demonstrated the polymer P4 also to possess the best selectivity.

Rational Design and Development of Anisotropic and Mechanically Strong Gelatin‐Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation

Rational design and development of tailorable simple synthesis process remains a centerpiece of investigational efforts toward engineering advanced hydrogels. In this study, a green and scalable synthesis approach is developed to formulate a set of gelatin‐based macroporous hybrid hydrogels. This approach consists of four sequential steps starting from liquid‐phase pre‐crosslinking/grafting, unidirectional freezing, freeze‐drying, and finally post‐curing process. The chemical crosslinking mainly involves between epoxy groups of functionalized polyethylene glycol and functional groups of gelatin both in liquid and solid state. Importantly, this approach allows to accommodate different polymers, chitosan or hydroxyethyl cellulose, under identical benign condition. Structural and mechanical anisotropy can be tuned by the selection of polymer constituents. Overall, all hydrogels show suitable structural stability, good swellability, high porosity and pore interconnectivity, and maintenance of mechanical integrity during 3‐week‐long hydrolytic degradation. Under compression, hydrogels exhibit robust mechanical properties with nonlinear elasticity and stress‐relaxation behavior and show no sign of mechanical failure under repeated compression at 50% deformation. Biological experiment with human bone marrow mesenchymal stromal cells (hMSCs) reveals that hydrogels are biocompatible, and their physicomechanical properties are suitable to support cells growth, and osteogenic/chondrogenic differentiation, demonstrating their potential application for bone and cartilage regenerative medicine toward clinically relevant endpoints.     

Optimization of Microwave-Assisted Extraction (MAE) for the Isolation of Antioxidants from Basil (Ocimum basilicum L.) by Response Surface Methodology (RSM)

Abstract

The recovery of antioxidants from basil (Ocimum basilicum L.) was modeled with the aid of response surface methodology (RSM) using microwave-assisted extraction (MAE). Face-centered central design (FCCD) was employed to optimize the MAE operational parameters including the extraction time (1 to 7?min), extraction temperature (30 to 120?°C), solid-to-solvent ratio (0.1 to 0.4), and solvent concentration (20 to 80% ethanol, v/v), and to obtain the best possible combinations of these parameters for a high antioxidant yield from basil. The total antioxidant capacity (TAC) was expressed in trolox (TR) equivalents per gram of dried sample (DS). Three of the operational parameters (temperature, extraction time and solvent concentration) were shown to have significant effect on the extraction efficiency of antioxidants in basil extracts (p?<?0.05). The solvent concentration was shown to be the most significant factor on antioxidant yield obtained by MAE. There was a close relationship between experimental and predicted values using the proposed method. This optimized MAE method shows an application potential for the efficient extraction of antioxidants from basil in the food and pharmaceutical industries.     

Radical Copolymerization of Acrylic Monomers. II Effect of Solvent on Radical Copolymerization of Methyl Methacrylate and Styrene

The influence of various solvents on the copolymerization behavior of methyl methacrylate with styrene has been investigated. In these systems there is a significant solvent effect on both r_S and r_M which may be attributed to changes in the dielectric constant of the solvents used. The calculated relative reactivity of the polystyryl radical towards the methyl methacrylate monomer increases with increasing solvent polarity, whereas the reactivity of poly(methyl methacrylate) radical towards styrene monomer decreases. The results obtained are discussed taking into account the behavior of both monomers in homopolymerization with the same experimental conditions as in copolymerization.     

Monitoring of di-(2-ethylhexyl)phthalate,nonylphenol, nonylphenol ethoxylates,and polychlorinated biphenyls in anaerobic and aerobic sewage sludge by gas chromatography–mass spectrometry

The occurrence of di-(2-ethyhexyl)phthalate (DEHP), nonylphenol and nonyphenol mono- and diethoxylates (NPEs) and seven polychlorinated biphenyl (PCB) congeners in different types of sludge samples is reported. The analysis of these compounds was carried out by sonication-assisted extraction and analytical determination by gas chromatography coupled with a mass spectrometry detector, following a previously described method. The applicability of the method was tested by monitoring the organic pollutants in primary, secondary, mixed, and digested-dehydrated sludge samples from two wastewater treatment plants (WWTPs) based on aerobic and on anaerobic biological stabilization. The occurrence of these compounds in sewage sludge and the influence of sludge stabilization process on the further farmland application of the sludge were evaluated. DEHP and NPEs were detected in all analysed sludge samples from both WWTPs at concentration levels in the range of 22.3–601?mg?kg^?1 and 136–2357?mg?kg^?1 dm (dry matter), respectively. PCBs were detected in all types of sludge analysed from the anaerobic WWTP but was not detected in any sludge sample from the aerobic WWTP. Concentration levels of the sum of the seven PCBs congeners were up to 1.5?mg?kg^?1 dm. The concentration of DEHP, sum of NPEs, and sum of the seven PCB congeners were higher than the limits fixed in the third draft of the future Sludge Directive for land application of sludge in the 67%, 100%, and 11% of samples from the anaerobic WWTP and in the 83%, 92%, and 0% of samples from the aerobic WWTP, respectively.     

13-Hydroxyacenaphato[1,2-b]quinolizinium bromide as a new flouorescence indicator

13-Hydroxyacenaphtho[1,2-b]quinolizinium bromide (13-HQBr)was selected as a fluorescence indicator to determine basic compounds in non-aqueous media. This compound possesses an acidic phenolic hydroxyl group. It presents varying absorption (ROH, 408, 430 nm; RO(-) 456, 478 nm) and excitation spectra (ROH, 425 nm; RO, 471 nm) depending on the pH of the media, but the same emission fluorescence spectrum (ROH = RO(-), 526 nm) at different pH in buffered aqueous solutions. However, in acidic non-aqueous media (acetic, formic and trifluoroacetic acids), it can be observed that the fluorescence emission spectra differ for the ionized (lambda(em) = 530 nm) and non-ionized (lambda(em) = 440, 470 nm) forms. The fluorescence intensity at the characteristic peaks depends on the acid-base equilibria in the ground and excited states. Therefore, this property could be used to evaluate the concentration of basic compounds, showing a good linearity range between fluorescence intensity and basic sample concentration.     

Electrochemical and spectroscopic characterization of the novel charge-transfer ground state in diimine complexes of ytterbocene

The novel charge-transfer ground state found in alpha,alpha'-diimine adducts of ytterbocene (C(5)Me(5))(2)Yb(L) [L = 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen)] in which an electron is spontaneously transferred from the f(14) metal center into the lowest unoccupied (pi*) molecular orbital (LUMO) of the diimine ligand to give an f(13)-L(*)(-) ground-state electronic configuration has been characterized by cyclic voltammetry, UV-vis-near-IR electronic absorption, and resonance Raman spectroscopies. The voltammetric data demonstrate that the diimine ligand LUMO is stabilized and the metal f orbital is destabilized by approximately 1.0 V each upon complexation for both bpy and phen adducts. The separation between the ligand-based oxidation wave (L(0/-)) and the metal-based reduction wave (Yb(3+/2+)) in the ytterbocene adducts is 0.79 V for both bpy and phen complexes. The UV-vis-near-IR absorption spectroscopic data for both the neutral adducts and the one-electron-oxidized complexes are consistent with those reported recently, but previously unreported bands in the near-IR have been recorded and assigned to ligand (pi*)-to-metal (f orbital) charge-transfer (LMCT) transitions. These optical electronic excited states are the converse of the ground-state charge-transfer process (e.g., f(13)-L(*-) <--> f(14)-L(0)). These new bands occur at approximately 5000 cm(-1) in both adducts, consistent with predictions from electrochemical data, and the spacings of the resolved vibronic bands in these transitions are consistent with the removal of an electron from the ligand pi* orbital. The unusually large intensity observed in the f --> f intraconfiguration transitions for the neutral phenanthroline adduct is discussed in terms of an intensity-borrowing mechanism involving the low-energy LMCT states. Raman vibrational data clearly reveal resonance enhancement for excitation into the low-lying pi* --> pi* ligand-localized excited states, and comparison of the vibrational energies with those reported for alkali-metal-reduced diimine ligands confirms that the ligands in the adducts are reduced radical anions. Differences in the resonance enhancement pattern for the modes in the bipyridine adduct with excitation into different pi* --> pi* levels illustrate the different nodal structures that exist in the various low-lying pi* orbitals.     

The molecular structure of 2-methylbenzotriazole (2MeBzTr) in connection with the x-ray structure of 2MeBzTr.HBF4.H2O

The fluoroborate of 1H-2-methylbenzotriazolium monohydrate crystallizes in the Pbca space group [Z = 8, a = 16.734(3), b = 19.153(9), c = 6.937(1) Å], The hydrogen bond network between the three molecules, 2MeBzTr, HBF₄ and H₂O, corresponds to a situation intermediate between the fluoroborate of a protonated benzotriazole (BF4^?.2MeBzTrH⁺) and a neutral benzotriazole hydrogen-bonded to fluoroboric acid (HBF₄,2MeBzTr). The behaviour of the title compound in solution is also intermediate between these two extreme situations. Thus, the present compound is one of the rare examples of a proton solvated only by very weak hydrogen bond acceptors.     

Sandwich Techniques in flow injection analysis : Part 1. Continuous recalibration techniques for process control

Flow injection methodology based on sample insertion between two different standard solutions used as carrier streams is described. This approach provides a simple system for continuous recalibration in process control; spectrophotometric and ion-selective electrode procedures are outlined.     

Direct HPLC resolution of beta-aminoalcohol (tazifylline,ranolazine, sotalol) enantiomers

Summary A routine chiral analysis has been developed to control the optical purity of chiral drugs and to monitor their asymmetric synthesis. The recent advent of new chiral stationary phases for HPLC enabled us to achieve the direct resolution of chiral drugs without any derivatization. The factors affecting chiral resolution on a new alpha₁-acid glycoprotein column (EnantioPac, LKB) were assessed with three beta-aminoalcohols.