A combinatorial approach to obtain affinity media with binding properties towards the aflatoxins

In our work we performed a combinatorial solid-phase synthesis in aqueous medium to prepare peptide libraries from which to select an amino acid sequence with binding properties towards aflatoxins.We used polystyrene beads, functionalised with carboxylic groups as solid support and eight amino acids as monomers. During the first step 64 different sequences of two amino acids were prepared by exploiting the principles of combinatorial chemistry; then the binding properties of all sequences towards aflatoxin B(1 )were checked. We determined binding constants towards aflatoxin B(1) and towards aflatoxins B(2), G(1) and G(2). Results were promising, so we prepared a new library by using the selected dipeptide as the starting solid phase. After selecting the best tetrapeptide sequences, we determined binding constants towards the quoted aflatoxins. We obtained binding constants ( K>10(4) M(-1)) similar to those shown by human serum albumin for similar compounds. Preliminary studies on an extraction column were promising for the development of an SPE system and for its application in food matrices.     

π‐Facial Selectivity in the Formation of Tricarbonylchromium(0) Complexes of Estra‐1, 3, 5(10), 6‐tetraenes

The preparation of two η⁶‐estra‐1, 3, 5(10), 6‐tetraene tricarbonylchromium complexes 4 and 6 are described. In both cases only one stereoisomer can be isolated, in contrast to other estrane‐tricarbonylchromium complexes, where complexations are non‐stereoselective. X‐ray crystal structural analysis of 4 discloses that only the more sterically hindered β‐facial isomer is formed. It is assumed that the 6, 7‐olefinic moiety exerts a directive influence on the complexation.     

氢部分选择性催化还原NO反应研究

在低钯含量活性非均布Pd/Al2O3催化剂上，实现了富氧条件下，氢部分选择性催化还原NO过程，低温、富氧条件下NO的转化率高达80％－100％。NO直接分解实验表明，600℃，NO分解转化率在无氧时为17．3％，有0．5％氧存在时接近于0。氢非选择性还原NO条件下，100℃以下，NO转化率为100％。根据实验结果及文献，推测了氢部分选择性还原NO过程中可能存在的反应，不同的反应温度下，NO脱除反应有所不同。在115℃以下，NO还原产物为NH3；115℃－155℃，NO还原产物为NH3、N2O和N2；155℃以上，NO还原产物中无NH3存在。NO还原反应与氢氧反应是平行的竞争反应。     

Positive ion chemistry of esters of carboxylic acids in air plasma at atmospheric pressure

Ionization of esters of carboxylic acids RCOOR' (R = H, alkyl; R' = alkyl) within the air plasma of the Atmospheric Pressure Chemical Ionization (APCI) source occurs largely via H(+)-transfer and, to a minor extent, via NO(+) association. The protonated ester MH(+) is normally observed as M(2)H(+) and as higher aggregates (M(3)H(+), M(3)H(+)(H(2)O)) also at high source temperature. The behavior of M(2)H(+) upon collisional activation is consistent with the reported dissociation of proton-bound dimers to MH(+) species that, in turn, fragment according to the known paths of lowest energy. In addition, other important product ions form within the plasma, some in very high relative abundance, which are attributed to ion-molecule condensation reactions between neutral M and either MH(+) or M(2)H(+) resulting in the elimination of CO, R'OH, alkene from the alkoxy moiety of the ester and HCOOH. A general scheme is proposed to account for the experimental observations, which suggest that the encounter complex formed between MH(+) and M or between M(2)H(+) and M may either collisionally relax to the protonated dimer or trimer, respectively, or react via covalent bond forming and cleaving steps to eliminate stable neutral molecules. The proposed scheme is supported by both the observed concentration dependence and the temperature dependence of the products relative abundances within the plasma. Such reactions can be the dominant process, as in the case of formate esters. A second significant ionization route involves addition of NO(+) to form M(n)NO(+) (n = 1, 2, 3). An additional product corresponding to [M(2)NO(+) - CO(2)] is also observed with iso- and n-butyl formate esters.     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.     

Structure factors calculated from molecular wavefunctions. II. Analysis of the molecular charge distribution in diborane

The electron density distribution in the crystal of diborane has been determined using structure factors based on molecular densities. The libration-correction and third-cumulant terms have also been included in the expression for the temperature factor. The equilibrium r_e values for BH bond lengths obtained by this treatment are about 0.02Åshorter than the spectroscopic ones. A total librational motion of the diborane molecule is determined: the root-mean-square oscillations about inertial axis are 11.0° (8), 9.6° (5) and 7.2° (5), respectively. The dynamic theoretical deformation density shows a three-center BHB bond picture for the bridge structure.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

Another aromaticity vs non-aromaticity dilemma: The structure of anti-1,6:8,13-biscarbonyl [14]annulene

The X-ray crystal structure determination of anti-1,6:8,13-bis-carbonyl [14] annulene (1) is described. The structure has been solved by direct methods and refined to an R of 0.046 for 1074 reflections with I > 2σ(I). The molecular structure of 1 appears to be aromatic, at least from geometrical parameters. This is in contrast with the great tendency of the compound to polymerize and also with the structure of the anti-bridged [14]annulenes previously studied, having polyenic character. It is possible that the geometry of the compound appears to be ‘aromatic’ due to disorder in the crystal.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.