Thermodynamic analysis of the province of Ravenna (Italy)

This is a thermodynamic analysis of the Province of Ravenna (Italy) and its districts (Ravenna, Faenza and Lugo) and an evaluation of entropy waste production based on a balance sheet of greenhouse gases. The method used is energy analysis. The results show that the Province and Ravenna are characterized by a heavy exploitation of local non renewable resources, Faenza strikes a good balance between economic development and environment conservation and Lugo is less sustainable than the others. The greenhouse gas balance shows that the Province emits 10.5 times the quantity of greenhouse gases that it adsorbs and that the emissions reduction is required in the energy sector, which is responsible for 92% of the total.     

Multitarget Drug Discovery for Alzheimer's Disease: Triazinones as BACE‐1 and GSK‐3β Inhibitors

Cumulative evidence strongly supports that the amyloid and tau hypotheses are not mutually exclusive, but concomitantly contribute to neurodegeneration in Alzheimer′s disease (AD). Thus, the development of multitarget drugs which are involved in both pathways might represent a promising therapeutic strategy. Accordingly, reported here in is the discovery of 6‐amino‐4‐phenyl‐3,4‐dihydro‐1,3,5‐triazin‐2(1H)‐ones as the first class of molecules able to simultaneously modulate BACE‐1 and GSK‐3β. Notably, one triazinone showed well‐balanced in vitro potencies against the two enzymes (IC₅₀ of (18.03±0.01) μM and (14.67±0.78) μM for BACE‐1 and GSK‐3β, respectively). In cell‐based assays, it displayed effective neuroprotective and neurogenic activities and no neurotoxicity. It also showed good brain permeability in a preliminary pharmacokinetic assessment in mice. Overall, triazinones might represent a promising starting point towards high quality lead compounds with an AD‐modifying potential.     

Molecular Size and Electronic Structure Combined Effects on the Electrogenerated Chemiluminescence of Sulfurated Pyrene‐Cored Dendrimers

The electrochemistry, photophysics, and electrochemically generated chemiluminescence (ECL) of a family of polysulfurated dendrimers with a pyrene core have been thoroughly investigated and complemented by theoretical calculations. The redox and luminescence properties of dendrimers are dependent on the generation number. From low to higher generation it is both easier to reduce and oxidize them and the emission efficiency increases along the family, with respect to the polysulfurated pyrene core. The analysis of such data evidences that the formation of the singlet excited state by cation–anion annihilation is an energy‐deficient process and, thus, the ECL has been justified through the triplet–triplet annihilation pathway. The study of the dynamics of the ECL emission was achieved both experimentally and theoretically by molecular mechanics and quantum chemical calculations. It has allowed rationalization of a possible mechanism and the experimental dependence of the transient ECL on the dendrimer generation. The theoretically calculated Marcus electron‐transfer rate constant compares very well with that obtained by the finite element simulation of the whole ECL mechanism. This highlights the role played by the thioether dendrons in modulating the redox and photophysical properties, responsible for the occurrence and dynamics of the electron transfer involved in the ECL. Thus, the combination of experimental and computational results allows understanding of the dendrimer size dependence of the ECL transient signal as a result of factors affecting the annihilation electron transfer.     

GEOMETRY OF INTERCALATION OF PSORALENS IN DNA APPROACHED BY MOLECULAR MECHANICS*

The results of molecular mechanical calculations on intercalation complexes of 3-carbethoxypsoralen, 5-methoxypsoralen, 8-methoxypsoralen, 7-methylpyrido[3,4-c]psoralen (MepyPs) and 7-methylpyrido[4,3-c]psoralen (2N-MePyPs) with the double stranded duodecanucleotide d(CGCGATATCGCG)2 are presented. In the energy-minimized structures, the psoralens are intercalated with their plane orthogonal to the helix axis. Stacking interactions between the furan ring of the psoralen and the adjacent bases are maximized in most derivatives studied, whereas the effect of the various substituents of the psoralen ring is to specifically push part of the molecule towards either the minor or the major groove, preventing a symmetrical intercalation (with respect to the two strands of the DNA). The relative position of the psoralen ring and of the adjacent thymine foreshadows the formation of furan-side monoadducts in 3-CPs, MePyPs and 2N-MePyPs, whereas the formation of a pyrone-side monoadduct appears as geometrically more favourable in 5-MOP and both furan- and pyrone-side monoadducts can be geometrically envisaged in 8-MOP. A good correlation therefore exists between the more or less favourable equilibrium geometries and the experimentally observed photoreactions. The present study is the first attempt to characterize the geometrical parameters as part of a complex set of geometrical, dynamical and excited state parameters governing the overall DNA-psoralen photoreaction.     

An optimized luciferase bioluminescent assay for coenzyme A

A new bioluminescent method for coenzyme A (CoA) quantification is described. It is based on the enzymatic conversion of dehydroluciferyl-adenylate (L-AMP) into dehydroluciferyl-coenzyme A (L-CoA) by firefly luciferase (E.C. 1.13.12.7) (LUC), which causes a flash of light that can be measured in a luminometer. The method was subjected to optimization using experimental design methodologies to obtain optimum values for the concentrations of L-AMP ([L-AMP]), luciferase ([LUC]), ATP ([ATP]) and luciferin ([LH₂]). This method has a linear response over the range of 0.25–4 μM of CoA, with a limit of detection (LOD) of 0.24 μM and a limit of quantification (LOQ) of 0.80 μM. The assay has a relative standard deviation of about 7%. By coupling this optimized procedure to bioluminescent detection, a sensible and robust method can be obtained for the analysis of CoA.     

Efficient organic monoliths prepared by γ-radiation induced polymerization in the evaluation of histone deacetylase inhibitors by capillary(nano)-high performance liquid chromatography and ion trap mass spectrometry

New monolithic HPLC columns were prepared by γ-radiation-triggered polymerization of hexyl methacrylate and ethylene glycol dimethacrylate monomers in the presence of porogenic solvents. Polymerization was carried out directly within capillary (250-200 μm I.D.) and nano (100-75 μm I.D.) fused-silica tubes yielding highly efficient columns for cap(nano)-LC applications. The columns were applied in the complete separation of core (H2A, H2B, H3, and H4) and linker (H1) histones under gradient elution with UV and/or electrospray ionization (ESI) ion trap mass spectrometry (MS) detections. Large selectivity towards H1, H2A-1, H2A-2, H2B, H3-1, H3-2 and H4 histones and complete separation were obtained within 8 min time windows, using fast gradients and very high linear flow velocities, up to 11 mm/s for high throughput applications. The method developed was the basis of a simple and efficient protocol for the evaluation of post-translational modifications (PTMs) of histones from NCI-H460 human non-small-cell lung cancer (NSCLC) and HCT-116 human colorectal carcinoma cells. The study was extended to monitoring the level of histone acetylation after inhibition of Histone DeACetylase (HDAC) enzymes with suberoylanilide hydroxamic acid (SAHA), the first HDAC inhibitor approved by the FDA for cancer therapy. Attractive features of our cap(nano)-LC/MS approach are the short analysis time, the minute amount of sample required to complete the whole procedure and the stability of the polymethacrylate-based columns. A lab-made software package ClustMass was ad hoc developed and used to elaborate deconvoluted mass spectral data (aligning, averaging, clustering) and calculate the potency of HDAC inhibitors, expressed through a Relative half maximal Inhibitory Concentration parameter, namely R_IC(50) and an averaged acetylation degree.     

Tandem "click" reactions at acetylene-terminated Si(100) monolayers

We demonstrate a simple method for coupling alkynes to alkynes. The method involves tandem azide-alkyne cycloaddition reactions ("click" chemistry) for the immobilization of 1-alkyne species onto an alkyne modified surface in a one-pot procedure. In the case presented, these reactions take place on a nonoxidized Si(100) surface although the approach is general for linking alkynes to alkynes. The applicability of the method in the preparation of electrically well-behaved functionalized surfaces is demonstrated by coupling an alkyne-tagged ferrocene species onto alkyne-terminated Si(100) surfaces. The utility of the approach in biotechnology is shown by constructing a DNA sensing interface by derivatization of the acetylenyl surface with commercially available alkyne-tagged oligonucleotides. Cyclic voltametry, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and X-ray reflectometry are used to characterize the coupling reactions and performance of the final modified surfaces. These data show that this synthetic protocol gives chemically well-defined, electronically well-behaved, and robust (bio)functionalized monolayers on silicon semiconducting surfaces.     

Sieve-based device for MALDI sample preparation. III. Its power for quantitative measurements

The solid sample inhomogeneity is a weak point of traditional MALDI deposition techniques that reflects negatively on quantitative analysis. The recently developed sieve-based device (SBD) sample deposition method, based on the electrospraying of matrix/analyte solutions through a grounded sieve, allows the homogeneous deposition of microcrystals with dimensions smaller than that of the laser spot. In each microcrystal the matrix/analyte molar ratio can be considered constant. Then, by irradiating different portions of the microcrystal distribution an identical response is obtained. This result suggests the employment of SBD in the development of quantitative procedures. For this aim, mixtures of different proteins of known molarity were analyzed, showing a good relationship between molarity and intensity ratios. This behaviour was also observed in the case of proteins with quite different ionic yields. The power of the developed method for quantitative evaluation was also tested by the measurement of the abundance of IGPP[Oxi]GPP[Oxi]GLMGPP (m/z 1219) present in the collagen-α-5(IV) chain precursor, differently expressed in urines from healthy subjects and diabetic-nephropathic patients, confirming its overexpression in the presence of nephropathy. The data obtained indicate that SBD is a particularly effective method for quantitative analysis also in biological fluids of interest.