Growth of p- and n-dopable films from electrochemically generated C60 cations

The formidable electron-acceptor properties of C60 contrast with its difficult oxidations. Only recently it has become possible to achieve reversibility of more than one electrochemical anodic process versus the six reversible cathodic reductions. Here we exploit the reactivity of electrochemical oxidations of pure C60 to grow a film of high thermal and mechanical stability on the anode. The new material differs remarkably from its precursor since it conducts both electrons and holes. Its growth and properties are consistently characterized by a host of techniques that include atomic force microscopy (AFM), Raman and infrared spectroscopies, X-ray-photoelectron spectroscopy (XPS), secondary-ion mass spectrometry (SIMS), scanning electron microscopy and energy-dispersive X-ray analysis (SEM-EDX), matrix-assisted laser desorption/ionization (MALDI), and a variety of electrochemical measurements.     

Manganese(II) pyrimidine-4,6-dicarboxylates: synthetic, structural, magnetic, and adsorption insights

A series of manganese(II) coordination polymers containing the bridging ligand pyrimidine-4,6-dicarboxylate (pmdc) have been prepared. The stoichiometries and structural features of these materials, which range from the one-dimensional (1D) chains in ([Mn(mu-pmdc)(H2O)3].2H2O)n (1) and ([Mn2(mu-pmdc)2(H2O)5].2H2O)n (2) to the two-dimensional layers in ([Mn(mu3-pmdc)(H2O)].H2O)n (3) or the three-dimensional porous network in ([Mn(pmdc)].2H2O)n (4), are extremely dependent on the synthetic conditions (i.e., temperature and solvent). In spite of the structural diversity of these systems, crystallographic studies revealed that the pmdc ligand typically displays a tetradentate mu-(kappaO,kappaN:kappaO',kappaN') coordination mode with the carboxylate groups almost coplanar with the pyrimidine ring [as in compounds 1 and 2 and compound 5 described below)]. In compound 3, the pmdc moiety adopts a pentadentate mu3-(kappaO,kappaN:kappaO',kappaN':kappaO) coordination mode. The thermal, magnetic, and adsorption properties of these systems were also studied. The results showed that these compounds behave as antiferromagnets as a consequence of efficient magnetic exchange through the pmdc bridges. Compound 4 possesses permanent porosity, as proved by gas sorption data (N2 at 77 K and CO2 at 293 K). Finally, the heteronuclear iron(II)/manganese(II) compound ([FeMn(mu-pmdc)2(H2O)5].2H2O)n (5), which is isomorphous to 2, was also prepared and fully characterized.     

Fluorescence studies of the interactions of ubiquinol-10 with liposomes

Ubiquinone-10 plays a central role in energy production and its reduced form, ubiquinol-10 is also capable of acting as a potent radical scavenging antioxidant against membrane lipid peroxidation. Efficiency of this protection depends mostly on its localization in lipid bilayer. The intrinsic fluorescence of ubiquinol-10 and of the exogenous probe, Laurdan, has been used to determine the location of ubiquinol-10 in unilamellar liposomes of egg phosphatidylcholine (EggPC) and dimyristoyl phosphatidylcholine. Laurdan fluorescence moiety is positioned at the hydrophilic-hydrophobic interface of the phospholipid bilayer and its parameters reflect the membrane polarity and microheterogeneity, which we have used to explore the coexistence of microdomains with distinct physical properties. In liquid-crystalline bilayers ubiquinol has a short fluorescence lifetime (0.4 ns) and a high steady-state anisotropy. In a concentration-dependent manner, ubiquinol-10 influences the Laurdan excitation, emission and generalized polarization measurements. In EggPC liposomes ubiquinol-10 induces a decrease in membrane water mobility near the probe, while in dimyristoyl liposomes a decrease in the membrane water content was found. Moreover the presence of ubiquinol results in the formation of coexisting phospholipid domains of gel and liquid-crystalline phases. The results indicate that ubiquinol-10 molecules are mainly located at the polar-lipid interface, inducing changes in the physico-chemical properties of the bilayer microenvironment.     

Development of an online solid‐phase extraction with liquid chromatography method based on polymer monoliths for the determination of dopamine

Porous polymer monoliths have been used to develop an online solid‐phase extraction with liquid chromatography method for determination of dopamine in urine as well as for a continuous monitoring of dopamine in flowing system. A polymerization mixture containing 4‐vinylphenylboronic acid monomer has been used to prepare a trapping column based on specific ring formation reaction with dopamine cis‐diol functionality. Additionally, a monolithic stationary phase with zwitterion functionality has been used to prepare capillary column for the separation of dopamine. Experimental conditions including molarity, pH, and flow rate of the loading buffer together with a valve switching time have been optimized to provide the highest recovery for dopamine. Experimental setup has been used to determine dopamine in a urine. By using both calibration curve and standard addition method, the dopamine level was determined to be 1.19 and 1.28 mg/L, respectively. Further, we have used experimental design to optimize coupling of two extraction monolithic loops to separation capillary column with monolithic phase for a comprehensive monitoring of dopamine. After multivariate analysis, sample loading flow‐rate and a flow‐rate of flushing buffer were selected as the most significant variables. Optimized experimental setup was applied to continuously monitor dopamine degradation.     

Polymer brushes grafted to "passivated" silicon substrates using click chemistry

We present herein a versatile method for grafting polymer brushes to passivated silicon surfaces based on the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (click chemistry) of omega-azido polymers and alkynyl-functionalized silicon substrates. First, the "passivation" of the silicon substrates toward polymer adsorption was performed by the deposition of an alkyne functionalized self-assembled monolayer (SAM). Then, three tailor-made omega-azido linear brush precursors, i.e., PEG-N3, PMMA-N3, and PS-N3 (Mn approximately 20,000 g/mol), were grafted to alkyne-functionalized SAMs via click chemistry in tetrahydrofuran. The SAM, PEG, PMMA, and PS layers were characterized by ellipsometry, scanning probe microscopy, and water contact angle measurements. Results have shown that the grafting process follows the scaling laws developed for polymer brushes, with a significant dependence over the weight fraction of polymer in the grafting solution and the grafting time. The chemical nature of the brushes has only a weak influence on the click chemistry grafting reaction and morphologies observed, yielding polymer brushes with thickness of ca. 6 nm and grafting densities of ca. 0.2 chains/nm2. The examples developed herein have shown that this highly versatile and tunable approach can be extended to the grafting of a wide range of polymer (pseudo-) brushes to silicon substrates without changing the tethering strategy.     

Determination of amino acids by micellar EKC: recent advances in method development and novel applications to different matrices

The extensive use of CE for the analysis of amino acids has been well documented in a series of research articles and reviews. Aim of this report is to address the attention of the reader on the recent advances of micellar electrokinetic chromatography for the separation and determination of these analytes. Enhancements in selectivity of this technique through the use of pseudostationary phases containing mixed micelles, polymers, and chiral selectors are presented. Selected applications concerning separation and quantitation of even minute amounts of amino acids in: (i) biological fluids; (ii) microdialysates; (iii) plant cells; (iv) food stuff; and (v) pharmaceutical formulations have also been covered. Advantages of MEKC over other techniques for the amino acid analysis have been underlined.     

Electron-rich heteroaromatic conjugated bipyridine based ruthenium sensitizer for efficient dye-sensitized solar cells

A novel heteroleptic ruthenium complex carrying a heteroaromatic-4,4'-pi-conjugated 2,2'-bipyridine [Ru(II)LL'(NCS)(2)] (L = 4,4'-bis[(E)-2-(3,4-ethylenedioxythien-2-yl)vinyl]-2,2'-bipyridine, L' = 4,4'-(dicarboxylic acid)-2,2'-bipyridine) was synthesized and used in dye-sensitized solar cells, yielding photovoltaic efficiencies of 9.1% under standard global AM 1.5 sunlight.     

Molecular basis of drug resistance in aurora kinases

Aurora kinases have emerged as potential targets in cancer therapy, and several drugs are currently undergoing preclinical and clinical validation. Whether clinical resistance to these drugs can arise is unclear. We exploited a hypermutagenic cancer cell line to select mutations conferring resistance to a well-studied Aurora inhibitor, ZM447439. All resistant clones contained dominant point mutations in Aurora B. Three mutations map to residues in the ATP-binding pocket that are distinct from the "gatekeeper" residue. The mutants retain wild-type catalytic activity and were resistant to all of the Aurora inhibitors tested. Our studies predict that drug-resistant Aurora B mutants are likely to arise during clinical treatment. Furthermore, because the plasticity of the ATP-binding pocket renders Aurora B insensitive to multiple inhibitors, our observations indicate that the drug-resistant Aurora B mutants should be exploited as novel drug targets.     

CuO based catalysts on modified acidic silica supports tested in the de-NOx reduction

A series of dispersed CuO catalysts supported on modified silica supports with Al2O3 (SA), TiO2 (ST), and ZrO2 (SZ) were prepared optimising the adsorption method of copper deposition assisted by ultrasound treatment, already reported in a previous paper (S. Bennici, A. Gervasini, V. Ragaini, Ultrason. Sonochem. 10 (2003) 61). The obtained catalysts were characterized in their bulk (atomic absorption, X-ray diffraction, temperature programmed reduction) and surface (N2 adsorption, X-ray photoelectron spectroscopy, scanning electron microscopy) properties. The morphology of the finished materials was not deeply modified compared with that of the relevant supports. The employed complemented techniques evidenced a well dispersed CuO phase with a copper-support interaction on the most acidic supports (SA and SZ). The catalyst performances were studied in the reaction of selective catalytic reduction of NOx with ethene in oxidizing atmosphere in a flow apparatus under variable times (0.360-0.072 s) and temperatures (200-450 degrees C). The catalysts prepared on the most acidic supports (SA and SZ) were the most active and selective towards N2 formation. They showed a particular interesting activity in the reaction of NO2 reduction besides that of NO reduction.     

A convenient route to dinuclear chloro-bridged platinum(II) derivatives via nitrile complexes

The syntheses of the complexes [PtCl(2)(NCR)L] [R = Me, Et; L = PPh(3); R = Et, L = Py, CO] and [PtCl{(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}(NCEt)] are described starting from the easily available [PtCl(2)(NCR)(2)]. The stability of the products under different experimental conditions is discussed as well as their use as precursors to dinuclear complexes [Pt(μ-Cl)ClL](2). The crystal and molecular structures of cis-[PtCl(2)(NCEt)(PPh(3))], [SP-4-2]-[PtCl{(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}(NCEt)] and trans-[Pt(μ-Cl){(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}](2) are reported.