Measurement of the total active 8B solar neutrino flux at the Sudbury Neutrino Observatory with enhanced neutral current sensitivity

The Sudbury Neutrino Observatory has precisely determined the total active (nu(x)) 8B solar neutrino flux without assumptions about the energy dependence of the nu(e) survival probability. The measurements were made with dissolved NaCl in heavy water to enhance the sensitivity and signature for neutral-current interactions. The flux is found to be 5.21 +/- 0.27(stat)+/-0.38(syst) x 10(6) cm(-2) s(-1), in agreement with previous measurements and standard solar models. A global analysis of these and other solar and reactor neutrino results yields Deltam(2)=7.1(+1.2)(-0.6) x 10(-5) eV(2) and theta=32.5(+2.4)(-2.3) degrees. Maximal mixing is rejected at the equivalent of 5.4 standard deviations.     

"Safe" Coulomb excitation of 30Mg

We report on the first radioactive beam experiment performed at the recently commissioned REX-ISOLDE facility at CERN in conjunction with the highly efficient gamma spectrometer MINIBALL. Using 30Mg ions accelerated to an energy of 2.25 MeV/u together with a thin (nat)Ni target, Coulomb excitation of the first excited 2+ states of the projectile and target nuclei well below the Coulomb barrier was observed. From the measured relative deexcitation gamma-ray yields the B(E2;0(+)gs-->2(+)1) value of 30Mg was determined to be 241(31)e2 fm4. Our result is lower than values obtained at projectile fragmentation facilities using the intermediate-energy Coulomb excitation method, and confirms the theoretical conjecture that the neutron-rich magnesium isotope 30Mg resides outside the "island of inversion."     

Electrodynamics of the vortex lattice in untwinned YBaCuO by complex impedance measurements

We report complex impedance measurements in an untwinned YBaCuO crystal. Our broad frequency range covers both the quasi static response and the resistive response of the vortex lattice. It allow us to characterize the irreversibility line without the need of any frequency dependent pinning parameters. We confirm the validity of the two modes model of vortex dynamic, and extract both the surface critical current and the flux flow resistivity around the first order transition T_m. This latter is identified by the abrupt loss of pinning and by an unexpected step of (T) at T_m. Received 22 November 2002 / Received in final form 17 February 2003 Published online 20 June 2003 RID="a" ID="a"e-mail: alain.pautrat@ismra.fr RID="b" ID="b"UMR 6508 associée au CNRS     

Self-organized ZnAl2O4 nanostructures grown on -sapphire

Self-organized ZnAl₂O₄ nanostructures with the appearance (in SEM) of high aspect ratio horizontal nanowires are grown on uncatalysed c-sapphire by vapour phase transport. The nanostructures grow as three equivalent crystallographic variants on c-sapphire. Raman and cathodoluminescence spectroscopy confirm that the nanostructures are not ZnO and TEM shows that they are the cubic spinel, zinc aluminate, ZnAl₂O₄, formed by the reaction of Zn and O with the sapphire substrate.     

Template assisted formation of micro- and nanotubular carbon nitride materials

Micro- and nanotubes of an amorphous carbon nitride material were synthesized by metathesis reactions between cyanuric chloride (C₃N₃Cl₃) and different nitrogen sources, such as Li₂(CN₂) or Li₃(BN₂). The intermediate formation of needle-shaped crystals of N(C₃N₃Cl₂)₃ was always observed in our reactions, and investigated with respect to their role as a template in the formation of tubes. Chemical analyses of the micro- and nanotubes reveal carbon to nitrogen ratios near 3:4, consistent with the suspected material C₃N₄. Synthesized carbon nitride materials were thermally stable up to 600 ^°C in inert atmosphere. They were inspected by a number of physical measurements, mainly using TEM, EDX and IR investigations.     

Enhanced reactivity of nanoscale iron particles through a vacuum annealing process

A reactivity study was undertaken to compare and assess the rate of dechlorination of chlorinated aliphatic hydrocarbons (CAHs) by annealed and non-annealed nanoscale iron particles. The current study aims to resolve the uncertainties in recently published work studying the effect of the annealing process on the reduction capability of nanoscale Fe particles. Comparison of the normalized rate constants (m²/h/L) obtained for dechlorination reactions of trichloroethene (TCE) and cis-1,2-dichloroethene (cis-1,2-DCE) indicated that annealing nanoscale Fe particles increases their reactivity ~30-fold. An electron transfer reaction mechanism for both types of nanoscale particles was found to be responsible for CAH dechlorination, rather than a reduction reaction by activated H₂ on the particle surface (i.e., hydrogenation, hydrogenolysis). Surface analysis of the particulate material using X-ray diffraction (XRD) and transmission electron microscopy (TEM) together with surface area measurement by Brunauer, Emmett, Teller (BET) indicate that the vacuum annealing process decreases the surface area and increases crystallinity. BET surface area analysis recorded a decrease in nanoscale Fe particle surface area from 19.0 to 4.8 m²/g and crystallite dimensions inside the particle increased from 8.7 to 18.2 nm as a result of annealing.     

Chemistry of chloroethylenes on Cu(100): bonding and reactions

The bonding and reactions of chloroethylenes (vinyl chloride, trans- and cis-dichloroethylene, trichloroethylene) on a Cu(100) surface have been investigated by temperature-programmed desorption and reaction, near-edge X-ray absorption fine structure (NEXAFS) studies and measurements of changes of the surface work function. The monolayer molecules adsorb molecularly intact at 95 K via π coordination. The molecules orient with their molecular planes parallel to the surface with little increase (<0.02 Å) in the C---C bond distance compared with the gas phase values. The degree of thermal dissociation increases with the extent of halogenation, and no chlorine is present in the hydrocarbon reaction products liberated from the surface. Both cis- and trans-1.2-chloroethylene produce acetylene and a small amount of benzene, while dissociation of trichloroethylene generates acetylene and deposits a carbon residue on the surface. Vinyl chloride desorbs from Cu(100) without reaction.     

Exploring new mass regions with the ISOLTRAP spectrometer

First direct mass measurements on rare earth isotopes around ¹⁴⁶Gd have been performed with the Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN. More than 40 isotopes of the elements Pr, Nd, Pm, Sm, Eu, Dy and Ho have been measured with an accuracy of typically 1 × 10^-7. In the case of ¹⁴¹Sm isomeric and ground state (ΔE = 175 keV) were resolved. Since isobaric contaminations are present in the ISOLDE beam, these measurements on rare earth isotopes became only possible after the installation of a new cooler trap which acts an isobar separator. This revised version was published online in August 2006 with corrections to the Cover Date.     

Source point discovery through high frequency asymptotic time reversal

Given local frequency domain wave data, the Numerical Micro-Local Analysis (NMLA) method (Benamou et al., 2004) [5] and its recent improved version (Benamou et al., 2011) [4] gives a pointwise numerical approximation of the number of rays, their slowness vectors and corresponding wavefront curvatures. With time domain wave data and assuming the source wavelet is given, the method also estimates the travel-time. The paper provides a non technical presentation of the improved NMLA algorithm and presents a numerical application which can be interpreted as a high frequency asymptotic version of the classical time reversal method (Borcea et al., 2003) [7]. A detailed technical presentation of the algorithm is available in Benamou et al. (2011) [4] and more numerical experiments can be found in Collino and Marmorat (2011) [15].