Characterization of a β-glucanase produced by Rhizopus microsporus var. microsporus, and its potential for application in the brewing industry

Background  

In the barley malting process, partial hydrolysis of β-glucans begins with seed germination. However, the endogenous 1,3-1,4-β-glucanases are heat inactivated, and the remaining high molecular weight β-glucans may cause severe problems such as increased brewer mash viscosity and turbidity. Increased viscosity impairs pumping and filtration, resulting in lower efficiency, reduced yields of extracts, and lower filtration rates, as well as the appearance of gelatinous precipitates in the finished beer. Therefore, the use of exogenous β-glucanases to reduce the β-glucans already present in the malt barley is highly desirable.     

Rapid separation of phenylthiohydantoin amino acids: ambient pressure ion-mobility mass spectrometry (IMMS)

An electrospray ionization (ESI) ambient pressure ion-mobility spectrometer (APIMS) interfaced to an orthogonal reflector time-of-flight mass spectrometer (TOFMS) was evaluated for the first time as a detector for the identification of phenylthiohydantoin (PTH)-derivatized amino acids, the final products in the Edman sequencing process of peptides and proteins. The drift and flight times of the twenty common PTH amino acids were characterized by a well-defined 2-D mobility/mass spectral pattern. The combination of mobility/mass modes of analysis gave rise to a unique trend-line formation for the series of PTH amino acids. In addition, each PTH amino acid had a unique reduced mobility constant K(o), thus enabling the differentiation of all the amino acid derivatives including the PTH-leucine and PTH-isoleucine isomers. More importantly it was shown that it was possible to resolve a complete reference mixture of PTH amino acids in a single experimental run in less than 1 min. Detection limits for the PTH amino acids were found to range from 1.04 to 3.52 ng; indicating that the limits of detection were less than 17.0 pmol for all of the PTH amino acids.     

Synthesis,crystal structure and luminescent property of a novel H<Subscript>2</Subscript>O-bridged cobalt(II) polymer with one-dimensional chain structure

The coordination compound [Co(C₁₀H₇COO)₂(H₂O)₃]_2n · 4nH₂O was prepared by the reaction of 1-naphthoic acid and cobalt(II) acetate tetrahydrate in basic solution, and was fully characterized by X-ray diffraction, element analysis, FTIR, TG-DTA and luminescent spectra. In the crystal the six-coordinated Co(II) centers are linked into one-dimensional zigzag chains by water molecules, which are further assembled into a two-dimensional network through weak inter-chain C–H···π interactions. The solid complex exhibits favorable fluorescent properties similar to those of free ligand at room temperature, which can be assigned to the intraligand electronic transfer.     

The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Experiments in Solving Mixed Integer Programming Problems on a Small Array of Transputers

The time-consuming process of solving large-scale Mixed Integer Programming problems using the branch-and-bound technique can be speeded up by introducing a degree of parallelism into the basic algorithm. This paper describes the development and implementation of a parallel branch-and-bound algorithm created by adapting a commercial MIP solver. Inherent in the design of this software are certain ad hoc methods, the use of which are necessary in the effective solution of real problems. The extent to which these ad hoc methods can successfully be transferred to a parallel environment, in this case an array of at most nine transputers, is discussed. Computational results on a variety of real integer programming problems are reported.     

Sorption of uranium by non-living water hyacinth roots

Summary Many studies have shown that water hyacinth (Eichhornia crassipes) roots can be used to accumulate high concentrations of organic as well as inorganic pollutants. They are currently used to remediate aquatic environments and aqueous solutions. In the present study, sorption of uranium from aqueous solutions by using dried roots of water hyacinth has been investigated. The sorption of uranium was examined as a function of initial concentration, pH, weight of roots and contact time. Five different concentrations 20, 40, 60, 80, and 100 μg ^. ml^-1 were used. Sorption proves to be very rapid and depend on pH, weight of roots and concentration of uranium. Maximum sorption capacity of water hyacinth roots was 64,000 U⁶⁺ μg/g. The sorption of uranium by water hyacinth roots follows a Langmuir isotherm.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Quantification methods of amorphous/crystalline fractions in high-energy ball milled pharmaceutical products

In this work, thermoanalytical, diffractometry, and microscopy measurements have been performed in order to characterize the effect of high energy milling on a drug active in the migraine prophylaxis and smoke cessation. We can assert that the mechanical treatment induces only a partial amorphisation of the solid phase, in particular it reduces the crystal order by producing lattice defects which propagate from the surface to the bulk crystal. For this reason, the DSC is able to detect the presence of ordered solid, while the powder X-ray diffractometry, because of its low penetration depth, does not reach the crystalline core of the particles.