The water-silicas interfacial interaction energies

The water-silicas interfacial interaction energies were calculated for samples of quartz, silicas and silicas outgassed at high temperatures using own and published data of the spreading pressure of water, its surface tension, its contact angle and using formulas obtained by the combination of the Young equation with a general equation of pair interaction. The values obtained for 18 different samples were in the range 7.80-6.92 kJ mol⁻¹. Lower values of energies are for samples that contain relatively less amounts of water at P/P₀ = 0.25 and are characterized also by relatively low values of surface pressures.     

Synthesis of carbon nanotubes by CVD: Effect of acetylene pressure on nanotubes characteristics

The effect of acetylene partial pressure on the structural and morphological properties of multi-walled carbon nanotubes (MWCNTs) synthesized by CVD on iron nanoparticles dispersed in a SiO₂ matrix as catalyst was investigated. The general growing conditions were: 110 cm³/min flow rate, 690 °C synthesis temperature, 180 Torr over pressure and two gas compositions: 2.5% and 10% C₂H₂/N₂. The catalyst and nanotubes were characterized by HR-TEM, SEM and DRX. TGA and DTA were also carried out to study degradation stages of synthesized CNTs. MWCNTs synthesized with low acetylene concentration are more regular and with a lower amount of amorphous carbon than those synthesized with a high concentration. During the synthesis of CNTs, amorphous carbon nanoparticles nucleate on the external wall of the nanotubes. At high acetylene concentration carbon nanoparticles grow, covering all CNTs’ surface, forming a compact coating. The combination of CNTs with this coating of amorphous carbon nanoparticles lead to a material with high decomposition temperature.     

DFT study of NH3 dissociation on Si(1 1 1)-7 × 7. The role of intermolecular interactions

The adsorption of NH₃ molecule on the Si(1 1 1)-7 × 7 surface modelled with a cluster has been studied using density functional theory (DFT). The results indicate the existence of a precursor state for the non-dissociative chemisorption. The active site for the molecular chemisorption is the adatom; while the NH₃ molecule adsorbs on the Si restatom via this preadsorbed state, the adsorption on the Si adatom is produced practically without an energy barrier. The ammonia adsorption on the adatom induces an electron transfer from the dangling bond of this atom to the dangling bond of the adjacent Si restatom, hindering this site for the adsorption of a second NH₃ incoming molecule. However, this second molecule links strongly by means of two H-bonds. The dissociative chemisorption process was studied considering one and two ammonia molecules. For the dissociation of a lonely NH₃ molecule an energy barrier of ∼0.3 eV was calculated, yielding NH₂ on the adatom and H on the restatom. When two molecules are adsorbed, the NH₃-NH₃ interaction yields the weakening of a N-H bond of the ammonia molecule adsorbed closer the Si surface. As a consequence, the dissociation barrier practically disappears. Thus, the presence of a second NH₃ molecule at the adatom-restatom pair of the Si(1 1 1)-7 × 7 surface makes the dissociative reaction self-assisted, the total adsorption process elapsing with a negligible activation barrier (less than 0.01 eV).     

Flow injection-chemical vapor generation atomic fluorescence spectrometry hyphenated system for organic mercury determination: A step forward

Monomethylmercury and ethylmercury were determined on line using flow injection-chemical vapor generation atomic fluorescence spectrometry without neither requiring a pre-treatment with chemical oxidants, nor UV/MW additional post column interface, nor organic solvents, nor complexing agents, such as cysteine. Inorganic mercury, monomethylmercury and ethylmercury were detected by atomic fluorescence spectrometry in an Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg⁰, monomethylmercury hydride and ethylmercury hydride, respectively. The effect of mercury complexing agent such as cysteine, ethylendiaminotetracetic acid and HCl with respect to water and Ar/H₂ microflame was investigated.The behavior of inorganic mercury, monomethylmercury and ethylmercury and their cysteine-complexes was also studied by continuous flow-chemical vapor generation atomic fluorescence spectrometry in order to characterize the reduction reaction with tetrahydroborate. When complexed with cysteine, inorganic mercury, monomethylmercury and ethylmercury cannot be separately quantified varying tetrahydroborate concentration due to a lack of selectivity, and their speciation requires a pre-separation stage (e.g. a chromatographic separation). If not complexed with cysteine, monomethylmercury and ethylmercury cannot be separated, as well, but their sum can be quantified separately with respect to inorganic mercury choosing a suitable concentration of tetrahydroborate (e.g. 10^? 5 mol L^? 1), thus allowing the organic/inorganic mercury speciation.The detection limits of the flow injection-chemical vapor generation atomic fluorescence spectrometry method were about 45 nmol L^? 1 (as mercury) for all the species considered, a relative standard deviation ranging between 1.8 and 2.9% and a linear dynamic range between 0.1 and 5 μmol L^? 1 were obtained. Recoveries of monomethylmercury and ethylmercury with respect to inorganic mercury were never less than 91%. Flow injection-chemical vapor generation atomic fluorescence spectrometry method was validated by analyzing the TORT-1 certificate reference material, which contains only monomethylmercury, and obtaining 83 ± 5% of monomethylmercury recovered, respectively. This method was also applied to the determination of monomethylmercury in saliva samples.     

Characterization of natural cellulosic fibers from Yucca aloifolia L. leaf as potential reinforcement of polymer composites

Cellulose - In this work lignocellulosic fibers were obtained from Yucca aloifolia L. leaves and their chemical, morphological, thermal and mechanical properties were studied. The fibers were...     

Synthesis of 2-methylidene-1-silacyclohexanes by intramolecular hydrosilylation

The preparation of various (hex-5-ynyl)silanes was achieved following two different synthetic approaches from readily available materials such as 4-bromobutene, 6-iodohexyne and chlorosilanes. Different reaction conditions for intramolecular hydrosilylation were tested to prepare the corresponding 2-methylidene-1-silacyclohexanes. Notably, the use of Speier’s catalyst allowed the regioselective formation of the desired products in moderate yields.     

On hedging in finite security markets

A market is considered where trading can take place only at discrete time points, the trading frequency cannot grow without bound, and the number of states of nature is finite. The main objectives of the paper are to show that the market can be completed also with highly correlated risky assets, and to describe an efficient algorithm to compute a self-financing hedging strategy. The algorithm consists off-line of a backwards recursion and on-line of the solution, in each period, of a system of linear equations; it is a consequence of a proof where, using a well-known mathematical property, it is shown that uniqueness of the martingale measure implies completeness also in our setting. The significance of ‘multistate’ models versus the familiar binomial model is discussed and it is shown how the evolution of prices of the (correlated) risky assets can be chosen so that a given probability measure is already the unique equivalent martingale measure.     

Solution properties of ultrahigh molecular weight polymers. VII. Conformational characteristics of poly(butyl methacrylate)

The paper is concerned with light scattering studies on solutions of ultrahigh molecular weight poly(butyl methacrylate). The dependence of the radius of gyration and of the second virial coefficient on the weight-average molecular weight of the polymers was established in methyl ethyl ketone, dimethylformamide, and CCl₄. Short-range and long-range interactions were discussed in terms of the steric factor σ, of the interaction parameter B, and of the interpenetration function ψ(z).