Evaluation of translational friction coefficients of macroscopic probes in nematic liquid crystals

We present a study of the translational friction coefficients of spherical and ellipsoidal probes in nematic liquid crystalline fluids, based on the numerical treatment of Leslie-Ericksen equations [Q. J. Mech. Appl. Math. 19, 357 (1966); Adv. Liq. Cryst. 4, (1979); Trans. Soc. Rheol. 5, 23 (1961); Adv. Liq. Cryst. 2, 233 (1976)] for incompressible nematic fluids. Simulations of director dynamics in a local environment surrounding the moving probe are presented, and the dependence of translational diffusion on liquid crystal viscoelastic parameters is discussed. The time evolution of the director field is studied in the presence of an orienting magnetic field in two characteristic situations: Directors of motion parallel and perpendicular with respect to the field. In the particular case under investigation, a detailed analysis is given for the case of spherical, prolate, and oblate ellipsoidal probes in rectilinear motion in nematic (4-methoxibenzylidene-4'-n-butylaniline), together with a comparison with other nematogens, namely, 4,4'-dimethoxuazoxy benzene and (4'-n-pentyl-4-cyanobiphenil). A discussion of the general methodology presented in this work is given for the case of colloidal dispersions in nematic liquid crystals, which are considered as model systems of dispersions of particles in host media with anisotropic physical properties.     

A New Method to Examine Interfacial Reactions of a Multilayered System NiAl–Hf–hBN on a Sapphire Fibre

Fibre reinforced NiAl offers new possibilities for the development of high strength structural materials of low density applicable in gas turbines at high operating temperatures. The properties of composite materials are strongly influenced by the strength of the fibre–matrix interface. In addition, if fibre and matrix differ in their thermal expansion coefficients, a well controlled interface reaction at high temperature changes is demanded. Therefore, two layers consisting of BN and Hf were embedded between a sapphire fibre and NiAl and heated at 1350 °C to find a compromise between adhesion and ductility. The control and characterization of the reaction zone is essential for the development of these new materials. Especially, the characterization of the fibre-coating interface is a challenge. The different hardness of fibre and coating makes it nearly impossible to use a conventional cross-section preparation. Further, the small dimension of the reaction zone requires the use of analytical techniques providing high lateral resolution. In order to accomplish these requirements, a newly developed technique FIB (Focused Ion Beam)-EPMA (Electron Probe Microanalysis) was combined with XRD (X-ray diffraction). XRD was performed for the identification of the phases. The reaction zone was exposed by a special FIB preparation technique and examined by surface-sensitive EPMA. This allowed to determine the spatial distribution of the different phases.     

Optimization strategy based on genetic algorithms and neural networks applied to a polymerization process

The article presents a simple and general methodology, especially destined to the optimization of complex, strongly nonlinear systems, for which no extensive knowledge or precise models are available. The optimization problem is solved by means of a simple genetic algorithm, and the results are interpreted both from the mathematical point of view (the minimization of the objective function) and technological (the estimation of the achievement of individual objectives in multiobjective optimization). The use of a scalar objective function is supported by the fact that the genetic algorithm also computes the weights attached to the individual objectives along with the optimal values of the decision variables. The optimization strategy is accomplished in three stages: (1) the design and training of the neural model by a new method based on a genetic algorithm where information about the network is coded into the chromosomes; (2) the actual optimization based on genetic algorithms, which implies testing different values for parameters and different variants of the algorithm, computing the weights of the individual objectives and determining the optimal values for the decision variables; (3) the user's decision, who chooses a solution based on technological criteria. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

Rapid capillary zone electrophoresis method for the determination of metal cations in beverages

A rapid and reliable capillary zone electrophoresis method for the determination of inorganic cations was developed. The complete separation of K⁺, Ba²⁺, Ca²⁺, Na⁺, Mg²⁺, Mn²⁺, Ni²⁺, Cd²⁺, Li⁺ and Cu²⁺ can be achieved in 4 min with a simple electrolyte composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). Injection was performed hydrostatically by elevating the sample at 10 cm for 30 s. The running voltage was +25 kV at room temperature. Indirect UV-absorption detection was achieved at 185 nm. The detection limit was in the range between 0.06 mg/l (Mg²⁺) and 0.57 mg/l (K⁺) and the quantification limits ranged from 0.10 mg/l (Ni²⁺) to 0.80 mg/l (Cu²⁺). The calibration graphs were linear in the concentration range from the quantification limit till at least 1 g/l in K⁺, 10 mg/l in Ba²⁺, Ca²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Cd²⁺, 40 mg/l in Na⁺ and 12 mg/l in Li⁺ and Cu²⁺. The repeatability, intraday and interday analysis were ≤1.55% and ≤3.64% for migration time and ≤3.38% and ≤3.63% for peak area. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is simple, fast, cheap and it is achieved with common products in either laboratory. For these reasons, it is a very useful method for routine analysis.     

Preparation and structural characterization of transition-metal complexes featuring the cymantrenyl(bromo)boryl ligand

In the present paper, we describe the first structural characterization of cymantrenyl(dihalo)borane and report on its use for the synthesis of novel cymantrenylboryl complexes.     

Tuning the electronic communication and rates of intramolecular electron transfer of dimers of trinuclear ruthenium clusters: bridging and ancillary ligand effects

Ten new bridged dimers of oxo-centered triruthenium clusters with CO and 4-(dimethylamino)pyridine (dmap), pyridine (py), or 4-cyanopyridine (cpy) as terminal ligands and pyrazine-d(4) (d(4)-pz), 2,5-dimethylpyrazine (dmpz), 2-methylpyrazine (mpz), and 2-chloropyrazine (clpz) as bridging ligands were prepared. The carbonyl stretching frequency, nu(CO), was used as a probe for infrared spectroelectrochemical measurements. In the neutral and doubly reduced states, a single band was observed for each of the dimers, with a shift in frequency due to the oxidation state of the triruthenium clusters. In the singly reduced state, a range of nu(CO) line shapes was observed, depending on the nature of the ligands, from two bands centered at the frequencies of the bands of the neutral and doubly reduced species to one broad band at the average of these two frequencies. By synthesizing new combinations of bridging and ancillary ligands, electronic communication between two bridged triruthenium clusters was effectively tuned, and electron-transfer rates were estimated by IR spectral line-shape analysis. In dimers bridged by the asymmetric ligand mpz, it was possible through selective isotope labeling of one CO ligand to observe "mixed-valence isomers," the two alternate charge distributions of a mixed-valence complex.     

Proteomics study of anthrax lethal toxin-treated murine macrophages

The anthrax lethal toxin (LeTx) is composed of two proteins, protective antigen and lethal factor, which bind and enter the cell through a host receptor termed the anthrax toxin receptor (ATR). In the cell, LeTx targets p38, part of the MAP kinase signaling pathway. The toxin appears to initiate an apoptotic pathway in infected cells, indicating additional downstream targets of the toxin. We have applied a proteomics approach to investigate these downstream targets and the affected processes. In this study we have used an improved strategy for fractionation based on protein pI, off-gel electrophoresis, employed in conjunction with relative quantitation using the mass labeling approach. In our survey, 67 proteins were observed and quantified from the cytosol of RAW 264.7 cells with respect to control versus toxin-treated cells. Many of these proteins are involved in the oxidative stress response, as well as apoptosis, and thus likely to be relevant to the effects of anthrax in infected cells. Our results indicate that the tumor necrosis factor-alpha-mediated pathway is compromised in intoxicated cells. The knowledge of such changes and the pathways leading to the changes should be of great value in understanding and combating this disease.