An amine-catalyzed enantioselective [3+2] cycloaddition of azomethine ylides and α,β-unsaturated aldehydes: applications and mechanistic implications

The catalytic enantioselective [3+2] cycloaddition between azomethine ylides and α,β-unsaturated aldehydes catalyzed by α,α-diphenylprolinol has been studied in detail. In particular, the reaction has been extended to the use of 2-alkenylidene aminomalonates generated in situ as azomethine ylide precursors. These reactions lead to the formation of pyrrolidines containing a 5-alkenyl side chain with potential for chemical manipulation. Moreover, a detailed and concise computational study has been carried out to understand the exact nature of the mechanism of this reaction and especially the consequences derived from the incorporation of the chiral secondary amine catalyst on the reaction pathway.     

Determination of terbuthylazine and desethylterbuthylazine in human urine and hair samples by eletrospray ionization-liquid chromatography/triple quadrupole mass spectrometry

Terbuthylazine (TBA) is a widely applied herbicide and an environmental contaminant. Following its use, humans, such as agricultural workers and rural residents, may be exposed. An isotope-dilution liquid chromatography coupled to electrospray-tandem mass spectrometry method for the determination of TBA, and its metabolite desethylterbuthylazine (DET) in human urine and hair was developed and validated. Under the optimised conditions, analytes were extracted from urine using a solid phase cartridge or from hair by sonication in methanol. Analytes were separated using a C18 reversed-phase chromatographic column and quantified, after positive ionization using a heated electrospray source, by a triple quadrupole mass detector in the selected reaction monitoring mode. Validation showed linear dynamic ranges up to 100 μg/L or 5.00 ng/mg hair, inter- and intra-run precisions <7%, and accuracies within 12% of spiked concentrations. Limits of quantification were 0.25 μg/L in urine and 0.01 ng/mg hair for both TBA and DET. Matrix effect evaluation showed that the isotope dilution approach allowed for the control of bias sources. TBA and DET were determined in specimens of agriculture workers exposed to TBA using the validated method. Hair samples contained TBA levels in the low nanogram per milligram range, and urine samples contained DET levels in the low microgram per liter range. Conversely, TBA levels in urine samples and DET levels in hair samples were always below the limit of quantification.     

Exchange coupling mediated by N-H···Cl hydrogen bonds: experimental and theoretical study of the frustrated magnetic system in bis(o-phenylenediamine)nickel(II) chloride

The title compound crystallizes in the monoclinic P2(1)/c space group with a = 11.2470(3) ?, b = 5.9034(2) ?, c = 12.0886(3) ?, β = 115.143(1)°, and V = 726.58(4) ?(3) and consists of discrete monomeric NiCl(2)(o-phenylendiamine)(2) molecules. Each o-phen ligand coordinates in a bidentate mode with the chloride ions occupying trans positions in the resulting tetragonally distorted octahedral coordination sphere. Two discrete sets of N-H···Cl hydrogen bonds link the octahedral molecules into a two-dimensional network, with type 1 interactions linking adjacent monomers along the c axis and type 2 interactions linking monomers along the diagonals in the bc plane. Analysis of the magnetic data reveals the existence of weak antiferromagnetic coupling within the layers via these hydrogen bonds, in addition to the presence of zero field splitting, with the best fit obtained for a 1d antiferromagnetic model with g = 2.0917(7), J/k = -2.11(4) K [J = -1.47(3) cm(-1)], and D = 1.05(3) cm(-1) [β = D/|J| = 0.72(6)] for the model with D > 0 and g = 2.0911(6), J/k = -2.26(1) K [J = -1.57(1) cm(-1)], and D = -0.86(1) cm(-1) [β = D/|J| = 0.55(6)] for the model with D < 0. Theoretical calculations of the exchange coupling confirm the experimental results, yielding values of J(1) = -1.39 cm(-1) for the type 1 hydrogen bonds and J(2)/k = -0.56 cm(-1) for the type 2 hydrogen bonds.     

Introduction of C-Sulfonate Groups into Disaccharide Derivatives

To prepare C-sulfonate derivatives of disaccharides two different strategies were followed. Thus 6- and 6′-C-sulfocellobiosides 4 and 10–12 were prepared starting from a suitably protected cellobioside. The 6′-C-sulfoaminocellobioside 18 was prepared by construction of the molecule through a glycosylation reaction. In both cases, the synthetic pathway involves regioselective tosylation, introduction of a sulfur atom by nucleophilic displacement with potassium thioacetate and oxidation with hydrogen peroxide.     

Rational Design and Development of Anisotropic and Mechanically Strong Gelatin‐Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation

Rational design and development of tailorable simple synthesis process remains a centerpiece of investigational efforts toward engineering advanced hydrogels. In this study, a green and scalable synthesis approach is developed to formulate a set of gelatin‐based macroporous hybrid hydrogels. This approach consists of four sequential steps starting from liquid‐phase pre‐crosslinking/grafting, unidirectional freezing, freeze‐drying, and finally post‐curing process. The chemical crosslinking mainly involves between epoxy groups of functionalized polyethylene glycol and functional groups of gelatin both in liquid and solid state. Importantly, this approach allows to accommodate different polymers, chitosan or hydroxyethyl cellulose, under identical benign condition. Structural and mechanical anisotropy can be tuned by the selection of polymer constituents. Overall, all hydrogels show suitable structural stability, good swellability, high porosity and pore interconnectivity, and maintenance of mechanical integrity during 3‐week‐long hydrolytic degradation. Under compression, hydrogels exhibit robust mechanical properties with nonlinear elasticity and stress‐relaxation behavior and show no sign of mechanical failure under repeated compression at 50% deformation. Biological experiment with human bone marrow mesenchymal stromal cells (hMSCs) reveals that hydrogels are biocompatible, and their physicomechanical properties are suitable to support cells growth, and osteogenic/chondrogenic differentiation, demonstrating their potential application for bone and cartilage regenerative medicine toward clinically relevant endpoints.     

Gold‐Decorated Chiral Macroporous Films by the Self‐Assembly of Functionalised Block Copolymers

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self‐assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N?P(R‐O₂C₂₀H₁₂)_0.9(FG)_0.2]_n‐b‐[N?PMePh]_m (FG=‐OC₅H₄N ( 6 ), ‐NC₄H₈S ( 7 ), and ‐NC₄H₈O ( 8 )), was accomplished by the sequential living cationic polycondensation of N‐silylphosphoranimines, using the mono‐end‐capped initiator [Ph₃P?N?PCl₃][Cl] ( 3 ). The self‐assembly of the phosphazene BCPs 6 – 8 led to chiral porous films. The functionality present on those polymers affected their self‐assembly behaviour resulting in the formation of pores of different diameters (D_n=111 ( 6 ), 53 ( 7 ) and 77 nm ( 8 )). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7 , having pyridine and thiomorpholine groups, respectively, were treated with HAuCl₄, followed by reduction with NaBH₄, yielding a new type of block copolyphosphazenes, which self‐assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.     

Synthesis and electro‐optical properties of polyfluorene modified with randomly distributed electron‐donor and rotaxane electron‐acceptor structural units in the main chain

Polyfluorene PF?γCD rotaxane copolymer, composed of randomly distributed 9,9‐dioctylfluorene, methyltriphenylamine (electron‐donating) and 9‐dicyanomethylenefluorene complexed with γ‐cyclodextrin (γCD) (electron‐accepting) structural units, has been synthesized by Suzuki cross‐coupling reaction. The chemical structures were proved by FTIR and ¹H NMR spectroscopy. The surface morphology, thermal, optical, electrochemical behavior, and adhesion characteristics of the obtained rotaxane copolymer have been investigated and compared with those of the nonrotaxane counterpart ( PF ). Relatively high fluorescence efficiency, almost identical normalized absorbance maximum in solution and solid‐state of PF?γCD rotaxane copolymer, and a more uniform and smoother surface with lower adhesion forces provides the role of γCD encapsulation on the lower aggregation propensity. PF?γCD and PF copolymers exhibit n‐ and p‐doping processes and blue‐light emission in the film state. The optical and electrochemical band gaps (ΔE_g), as well as the highest occupied molecular orbital/lowest unoccupied molecular orbital positions in an energetic diagram indicate that both copolymers are promising blue‐emitting electroluminescent materials. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Poly(ester urethane) guides for peripheral nerve regeneration

A biocompatible and elastomeric PU was synthesized from low-molecular-weight PCL as macrodiol, CMD as chain extender and HDI as chain linker for applications in the field of peripheral nerve repair. PU cast films supported in vitro attachment and proliferation of NOBEC. The in vitro adhesion and proliferation of S5Y5 neuroblastoma cells on the inner surface of uncoated, gelatin- and PL-coated PU guides were compared. Due to their superior in vitro performance, PL-coated PU guides were tested in vivo for the repair of 1.8 cm-long defects in rat sciatic nerves. The progressive regeneration was confirmed by EMG and histological analysis showing the presence of regenerating fibers in the distal stumps.     

Ionic azo-codendrimers: Influence of the acids contents in the liquid crystalline properties and the photoinduced optical anisotropy

A series of codendrimers has been prepared by the grafting of poly(propylene imine) PPI-(NH₂)₁₆ (G = 3) with two different carboxylic acids: the aromatic-based 5-[4′-(4-cyanophenylazo)phenyloxy]pentanoic acid (AZO) and the aliphatic 2,2-bis(undecanoyloxymethylene)propionic acid (BUPA) in different proportions. Their thermal properties, liquid crystalline behavior and photoinduced optical anisotropy have been investigated. The formation of the ionic compounds was confirmed by nuclear magnetic resonance (NMR) spectroscopy, and Fourier transform infrared (FT-IR) spectroscopy. The influence of the acid percentage in the liquid crystalline behavior was investigated by means of differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and X-ray diffractometry (XRD). All the resulting co-dendrimers present liquid crystalline properties displaying an evolution from nematic mesophase for the azo-richer dendrimers to smectic A mesophase for the BUPA-richer dendrimers. Only materials with low azobenzene contents up to four AZO units per dendrimer on average were processable by casting from dichloromethane solutions and resulted in transparent thin films appropriate for optical studies. The photoinduced dichroism reached was higher in the dendrimer with higher azo content (four units per dendrimer) being this material a good compromise between processability and optical response.