蒽环与苯环间的光化学Ⅰ.蒽环与苯环间分子内光致环加成反应

9 氯甲基蒽 ( 1 )与 3 ,5 二甲氧基苄醇 ( 2 )在相转移催化剂存在下反应生成 9 ( 3 ,5 二甲氧基苄基氧甲基 )蒽 ( 3 ) .( 3 )的苯溶液在紫外光照射下发生蒽环与苯环间的分子内 [4π + 4π]光致环加成反应 ,定量地生成多环化合物 ( 4 ) .( 4 )在热的作用下发生逆反应 ,定量地转化成原料 ( 3 ) .这种光致可逆反应可应用于制备光开关材料 .     

Cu+(H2) and Na+(H2) adducts in exchanged ZSM-5 zeolites

Cu(I) ions in Cu-ZSM-5 form Cu+(H2) complexes, stable at room temperature and sub-atmospheric H2 pressure, which do not have any homogeneous analogue except for matrix-isolated [Cu(eta2-H2)Cl]. Comparison with the unstable Na+(H2) adducts formed in the parent Na-ZSM-5 zeolite allow the conclusion that the Cu(I)/H2 bond is governed by sigma-pi overlap forces.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

The fluorescence of biliverdin dimethyl ester

Freshly prepared solutions of biliverdin dimethyl ester ( 2 ) in ethanol showed fluorescence maxima at 710 and 770 nm [Φ_F = 1.1. 10^?4 (room temperature) and 5.0 10^?4 (77 K)]. The maxima of monoprotonated 2 at 77 K were shifted to 725 and 806 nm and the quantum yield was increased to 2.6. 10^?2. This acid effect was reversible by neutralization with base. When a neutral solution was kept standing in the dark at room temperature, or when an acidic solution was neutralized by base, an additional fluorescence maximum at 500 nm with a mirror image excitation spectrum with λ_max = 470 nm developed, which disappeared on addition of acid and which is attributed to a chemical change of 2 .     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

EFFECTS OF BOUND MONOCLONAL ANTIBODIES ON THE DECAY OF THE PHOTOTRANSFORMATION INTERMEDIATES I1,21700 FROM NATIVE Avena PHYTOCHROME*

Abstract–Thc kinetics of the microsecond phototransformation intermediates of 124 kDa Avena phytochrome (1700^1,2) were studied in the prcsence of bound monoclonal antibodies at various temperatures. A global analysis was applied to the decays at all wavelengths at each temperature in order to derive the rate constants and the decay-associated spectra of the three decay components. Monoclonal antibodies bound to specific epitopes altered the Arrhenius parameters of both 1700^1,2 decay components. The strongest influence on these parameters was observed with OAT 8 (epitope between residues 624 and 686), which decreased by more than 50% the activation parameters of both components. This decrease is interpreted to result from an increased flexibility induced by this antibody in the ground state or in the transition state of bonds changing during the decay of both 1700 transients. Thus, the OAT 8 cpitope appears to be functionally important during the decay of the 1700^1,2 intermediates. For the case of 1100¹ bound OAT 23 and OAT 25 (epitopes between residues 1 and 66) reduced even further the relatively small flexibility of these bonds in the red light-absorbing form of phytochrome (P1) without antibodies, as reflected by the high preex-ponential factors for its decay. This resulted also in higher activation energies for this decay in the presence of the antibodies. Thus, the amino-terminus should act as a rigid spacer of the chromophore cavity without affecting it during the microsecond transformation, because the Arrhenius parameters for these decays are similar to those for small phytochrome. The possible implications of the influence of the various antibodies on the bleaching remaining after the decay of 1700^1,2 are discussed.     

Aged titania nanoparticles: the simultaneous control of local and long-range properties

TiO(2) nanoparticles are obtained by combining a sol-gel preparative route with hydrothermal aging steps, performed in mild conditions, of varying time lengths. Both aged and un-aged samples are thermally treated at 300 and 600 degrees C, for the same length of time. The crystal structures, the phase composition, and crystallite sizes are analyzed by powder X-ray diffraction. Raman spectra of anatase nanocrystals with average sizes of 7-10 nm are reported and the correlation between the Raman band shape of the main feature at 144 cm(-1) and the crystallite size is discussed. Nitrogen physisorption by Brunauer-Emmett-Teller (BET) method is adopted to evaluate the particles surface area and mesopore size and size distribution. The role played by the hydrothermal step in affecting the physicochemical properties of the powders is discussed also with respect to the H(2)O/TiO(2) interactions as apparent from Raman spectroscopy investigations of the O-H stretching range (3000-3800 cm(-1)).     

Developing an on-line derivatization of FAs by microwave irradiation coupled to HPLC separation with UV detection

The development of analytical methods for routine simultaneous identification and quantification of carboxylic fatty acids (CFAs) are required in different fields, such as, pharmaceutical cosmetics, food products and formulations of water–microemulsion–oil systems. Determination of CFAs has been developed mainly by gas chromatography (GC). As an alternative to GC, liquid chromatography (LC) has better sensitivity and selectivity. However, most CFAs show no useful absorption in ultraviolet–violet (UV–Vis) region, one of the more used detection technique in high-performance liquid chromatography (HPLC). In order to allow the use of UV–Vis detection, the use of pre-column derivatization has been reported to increase sensitivity and selectivity. Therefore, establishment of a simpler and faster on-line method with complete separation is needed for the screening of large numbers of samples. 2,4-Dinitrophenylhydrazine (2,4-DNPH.), benzoil chloride (BC), and phenylhydrazine (PH) were used for derivatization of different FAs by microwaves radiation (MW). After the on-line derivatization, products were separated and quantified by HPLC. Reactor coil was placed inside of microwaves oven at 450 W. Parameters as flow, amount of reagents, irradiation time, and chromatographic conditions were optimized. The continuous analysis using the MW–HPLC–UV system provided high sensitivity and reduced both the amount of reagent used and the analysis times. This proposed method can be used for the routine analysis of FAs contained in water–microemulsion–oil systems, to quantify the total acid fraction in each phase.     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.