Counterion exchange selectivity coefficients at water-in-oil microemulsion interface

The counterion binding at a water/Aerosol-OT (AOT)/heptane microemulsion interface was treated in the context of the pseudo-phase ion exchange formalism. Two approaches were used to determine the selectivity coefficient for copper/sodium counterion binding at the AOT microemulsion interface: measurements of the Cu(II) concentration taken up by the reverse micelle in a Winsor II microemulsion system and steady-state emission quenching measurements of an anionic water-solubilized probe, the tris-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium (II) ion. In addition, the selectivity coefficient for methyl viologen/sodium at the microemulsion surface was determined by the same photophysical technique. The value for copper (II)/sodium exchange (K(Cu/Na)) is 1.1+/-0.3 and that for methyl viologen/sodium (K(MV/Na)) is 0.9+/-0.3. The results show that the pseudo-phase ion exchange model can be used to obtain the selectivity coefficient in a microemulsion system.     

Divergent and solvent dependent reactions of 4-ethoxycarbonyl-3-methyl-1-tert-butoxycarbonyl-1,2-diaza-1,3-diene with enamines

Starting from 1-tert-butyloxycarbonyl-3-methyl-4-ethoxycarbonyl-1,2-diaza-1,3-diene and β,β,β and α,β-substituted enamines a careful choice of solvents and temperatures allows the divergent synthesis of 5,6-dihydro-4H-pyridazines, 2-(1-N-boc-hydrazono-ethyl)-4-pyrrolidin-1-yl-but-3-enoic acid ethyl ester, and 1-amino-pyrroles. Moreover, some interesting conclusions about the mechanism(s) of the reaction have been drawn by careful analysis of products' structure and distribution. Thus, the reaction may proceed through a stereospecific [4+2] cycloaddition mechanism giving rise to 5,6-dihydro-4H-pyridazines or by simple addition or domino addition/cyclization pathways affording, respectively, 2-(1-N-boc-hydrazono-ethyl)-4-pyrrolidin-1-yl-but-3-enoic acid ethyl ester and 1-amino-pyrroles (formally the [3+2] cycloaddition product).     

Geminate rebinding in R-state hemoglobin: kinetic and computational evidence for multiple hydrophobic pockets

Biphasic geminate rebinding of CO to myoglobin upon flash photolysis has been associated to ligand distribution in hydrophobic cavities, structurally detected by time-resolved crystallography, xenon occupancy, and molecular simulations. We show that the time course of CO rebinding to human hemoglobin also exhibits a biphasic geminate rebinding when the protein is entrapped in wet nanoporous silica gel. A simple branched kinetic scheme, involving the bound state A, the primary docking site C, and a secondary binding site B was used to calculate the microscopic rates and the time-dependent population of the intermediate species. The activation enthalpies of the associated transitions were determined in the absence and presence of 80% glycerol. Potential hydrophobic docking cavities within the alpha and beta chains of hemoglobin were identified by computational modeling using xenon as a probe. A hydrophobic pocket on the distal side of the heme, corresponding to Xe4 in Mb, and a nearby site that does not have a correspondence in Mb were detected. Neither potential xenon sites on the proximal side nor a migration channel from the distal to proximal site was located. The small enthalpic barriers between states B and C are in very good agreement with the location of the xenon sites on the distal side. Furthermore, the connection between the two xenon sites is relatively open, explaining why the decreased mobility of the protein with viscosity only slightly perturbs the energetics of ligand migration between the two sites.     

Analysis of the Temperature and Composition Dependence of Viscosimetric Properties of 2-Butanone <Emphasis Type="Bold">+</Emphasis> 2-Butanol Solvent Mixtures

Kinematic viscosities were measured for 2-butanone + 2-butanol binary liquid mixtures with a capillary Ubbelohde routine viscometer in the temperature range from 273.15 to 353.15 K at atmospheric pressure, and covering the whole miscibility field (0x_i1). Experimental data have been correlated by means of different empirical or semiempirical relationships, such as =(T), =(x_i), and =(T, x_i). Viscosity deviations, , from ideal behavior are negative at all experimental conditions, confirming that structure breaking effects prevail in the liquids. Furthermore, the thermodynamics of viscous flow and excess Gibbs energy of activation of viscous flow, G*^E, have been calculated. As an alternative and complementary approach to such investigations, the fluidity () of this binary system has been analyzed by the modified—Batschinski theory. The results are discussed in terms of the specific molecular interactions between the mixture components.     

Reactions of triacetic acid lactone with carbonyl compounds. X-Ray structure determination of 3-acetoacetyl-2-chromenone and 3,6,9,12-tetramethyl-1H,6H,7H,12H-6,12-methanodipyrano[4,3-b:4,3-f]-dioxocin-1,7-dione

The structure of 3-acetoacetyl-2-chromenone has been definitely assigned to the product resulting from the reaction of 4-hydroxy-6-methyl-2-pyrone, 1 , with 2-hydroxybenzaldehyde. Also, the reaction of the pyrone 1 with pentane-2,4-dione in a 2:1 molar ratio gives 3,6,9,12-tetramethyl-1H,6H,7H,12H-6,12-methanodypirano[4,3-b:4,3-f]dioxocin-1,7-dione. X-Ray analyses of both products are presented.     

Rapid determination of minority organic acids in honey by high-performance liquid chromatography

A rapid high-performance liquid chromatographic method for the determination of organic acids in honey is reported. Malic, maleic, citric, succinic and fumaric acids were identified and quantified in 15 min. First time repeatibility, reproducibility and recoveries were determined out for these acids in honey samples. Maleic acid was also quantified for first time by a chromatographic method. The organic acids were removed from honey by using a solid-phase extraction procedure with anion-exchange cartridges. Previously, the solution of honey was adjusted to pH 10.50 with 0.1 M NaOH and stirred for 15 min at room temperature. Then, this solution was adjusted to pH 5.00 with 0.1 M H2SO4. This procedure was carried out to avoid interferences in the baseline. The chromatographic separation was achieved with only one Spherisorb ODS-2 S5 column thermostated at 25 degrees C. Metaphosphoric acid (pH 2.20) was used as mobile phase at a flow-rate of 0.7 ml/min. Organic acids were detected with a UV-vis detector (215 nm). The precision results showed that the relative standard deviations of the repeatability and reproducibility were < or =3.20% and < or =4.86%, respectively. The recoveries of the organic acids ranged from 62.9 to 99.4%. Under optimum conditions the detection limits ranged from 0.0064 to 7.57 mg/kg and the quantification limits ranged from 0.025 to 10.93 mg/kg.     

Synthetic Strategies To Obtain V-P-O Open Frameworks Containing Organic Species as Structural Directing Agents. Crystal Structure of the V(IV)-Fe(III) Bimetallic Phosphate [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)][Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O

A general synthetic approach to rationalize the solution preparative chemistry of oxovanadium phosphates containing organic species as structural directing agents is presented. Careful attention is payed to the hydrolysis and condensation processes involving the ionic species in solution, and a simple restatement of the partial charge model (PCM) has been used in order to organize the experimental results. The structure of a new V(IV)-Fe(III) bimetallic oxovanadium phosphate, [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)] [Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O, has been determined by X-ray single crystal diffraction methods. This compound crystallizes in the monoclinic system, space group P2(1)/n and the cell dimensions are as follows: a = 14.383(3) ?, b = 10.150(2) ?, c = 18.355(4) ?, and beta = 90.39(3) degrees (Z = 2). The existence of a complex intercrossing channel system, including a very large channel of 18.4 ? of diameter (in which both water molecules and ethylenediamine species are located), is the more interesting feature of this structure. Thermal decomposition, including the dehydration/rehydration process, has been studied by thermal analysis and variable temperature X-ray powder diffraction techniques. A complementary SEM study of the different intermediate decomposition products is presented.     

Selenolate gold complexes with aurophilic Au(I)-Au(I) and Au(I)-Au(III) interactions

The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later.