Profiling fatty acids in vegetable oils by reactive pyrolysis-gas chromatography with dimethyl carbonate and titanium silicate

A novel methodology in on-line pyrolysis-gas chromatography (Py-GC) for the fast analysis of fatty acids in vegetable oils with minimal sample treatment and the use of non-toxic reagents is described. Pyrolysis at 500 degrees C for 10 s of sub-microgram quantity of vegetable oil dissolved in dimethyl carbonate (DMC) and in the presence of nanopowder titanium silicon oxide resulted in the production of fatty acid methyl esters (FAMEs) as unique products. Pyrolysis performed by means of a resistively heated filament pyrolyser interfaced to a GC-MS apparatus enabled the direct analysis of evolved FAMEs. The DMC/Py-GC-MS analysis was tested on soybean, coconut, linseed, walnut and olive oil and the results compared to the classical BF(3)-methanol as reference methodology. The DMC method exhibited a lower precision and was biased towards lower levels of polyunsaturated fatty acids (PUFA) in comparison to the BF(3)-methanol method, but was more advantageous in terms of reduced sample treatment, waste generation and risk factors of employed chemicals.     

1,3-Cycloaddition von alkinen an hetero-1,3-diene 1-aminopyrrole aus 1,2-diazabuta-1,3-dienen und 1-diethylaminopropin

1-Aminopyrroles (4) are obtained by reaction of 1,2-diazabuta-1,3-dienes (1) and ynamines (2). This reaction represents one of the very rare examples of 1,3-cycloaddition processes of alkynes and hetero-1,3-dienes.     

Mass displacements in quadrupolar field analysers

The influence of different instrumental parameters on the mass displacements observed in an ion trap and a quadrupole mass filter was investigated. In ion trap measurements it was observed that isolated ions (obtained by both ‘apex’ and ‘two-step’ isolation methods) show the same mass displacements determined in the usual mass spectra; isobaric ions of different structure irradiated with supplementary a.c. fields are ejected at different a.c. voltages, and different cooling times do not affect the mass value. In the quadrupole mass filter, differences in mass were found among isobaric ions of different structure, although to a smaller extent than those observed in the ion trap. All the data obtained are in agreement with the hypothesis of ion–r.f. field interactions originating from the polarizability of the ion.     

Synthesis and solid-state organization of coil-ring-coil block copolymers

Shape-persistent macrocycles based on the phenyl-ethynyl-butadienyl backbone containing two extraannular hydroxyl groups were prepared by the oxidative coupling of the appropriate phenylethynyl oligomers. Carbodiimide-directed coupling with independently synthesized polystyrene carboxylic acid oligomers led to ABA coil-ring-coil block copolymers in which the central macrocycle serves as rigid and the polystyrene oligomers as flexible elements. Depending on the size of the coil blocks, these structures aggregate in cyclohexane into supramolecular hollow cylindrical brushes in which the rigid core is surrounded by the flexible matrix. However, in the solid state it is not possible to identify a morphology in which isolated channels based on aggregated macrocycles are embedded in a matrix of polystyrene. Detailed X-ray and electron diffraction studies on samples prepared from a solution in cyclohexane under equilibrium conditions show that the material adopts a lamellar morphology in the solid state in which columns of macrocycles are aggregated into layers which are separated by polystyrene.     

Counterion Exchange Selectivity in Detergent–Polymer Aggregates

In aqueous solution, the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene glycol) (PEG) results in the formation of small aggregates or clusters of SDS attached to the PEG polymer chain. Selectivity coefficients for exchange of two monovalent (N-methyl-4-cyanopyridinium cation and Tl⁺) and two divalent (methylviologen cation and Cu²⁺) counterions at the surface of SDS–PEG clusters, determined employing photophysical techniques, are similar, but not identical, to those for exchange at the surface of SDS micelles in the absence of PEG. The principal factor affecting ion exchange selectivity in SDS–PEG clusters does not appear to be aggregate size or surface charge density but rather the presence of poly(oxyethylene) subunits at the aggregate surface.     

SOLVENT-INDUCED PHOTOREVERSIBLE REACTIONS OF C-PHYCOCYANIN FROM SYNECHOCOCCUS SP.

Abstract— C-phycocyanin from Synechococcus sp. ( Anacystis nidulans ) shows photoreversible absorption changes when dissolved in buffer containing 75% ethylene glycol (vol/vol). Irradiation with red light (638 nm) causes a 7.5% decrease in absorbance around the absorption maximum (620 m), while the absorbance around 500 nm increases. Subsequent irradiation with green light (500 nm) partially reverses this change. Final photoreversibility at around 620 nm amounts to ca. 2.5% of the maximum absorbance. These reactions are ascribed to two interconvertible species PC_r and PC_g, the former with a higher absorbance in the red. the latter in the green. The rate of dark reversion from PC_g to PC_r is strongly enhanced by ferricyanide. It is proposed that with this reagent, dark reversion occurs via an oxidized form of PC_g. Furthermore, ferricyanide in the presence of ethylene glycol is capable of reversibly oxidizing part of the chromophores of C-phycocyanin, presumably to a radical. In the absence of ethylene glycol, however, ferricyanide causes total irreversible bleaching of the pigment in the dark. The induced photoreversibility of C-phycocyanin is ascribed to the perturbing action on the protein structure by ethylene glycol in high concentrations. This solvent proved the most suitable perturbant of several compounds tested.     

Multichannel digital transmission in an optical network of communicating molecules

In present telecommunication networks, information transfer relies on the interplay of optical and electrical signals. Data are communicated optically but processed electronically. Methods to maintain the propagating signals solely at the optical level must be developed to overcome the transmission capacities and speed limits imposed by the electronic components. We have demonstrated that molecular switches can be used to gate optical signals in response to optical signals. We have realized a simple optical network consisting of three light sources, one cell containing a solution of three fluorescent molecules, one cell containing a solution of a three-state molecular switch and a detector. The light emitted by the three fluorophores is absorbed by the three states of the molecular switch. Using this simple operating principle, we have shown that multichannel digital transmission can be implemented on an ensemble of communicating molecules relying exclusively on the interplay of optical inputs and optical outputs.     

Conformational and photophysical studies on porphyrin-containing donor-bridge-acceptor compounds. Charge separation in micellar nanoreactors

Photophysical studies with semi-rigid, 1, and flexible, 2, donor-bridge-acceptor (D-b-A2+) molecules with D a porphyrin and A2+ a methyl viologen moiety, were performed in neat polar solvents as well as included in surfactant (DTAB) aqueous and in reverse AOT/n-alkane micelles. The micelles acted as nanoreactors for the photoinduced electron transfer reaction upon laser excitation. In spite of the longer lifetime of the charge separated (CS) state in the semi-rigid tetrad 1(ca. 200 ns vs. ca. 100 ns for the flexible dyad 2), the CS formation quantum yield, for example in acetonitrile, was lower for the former (phi(CS) = 0.13) than for the latter (0.58). Comparison of the time-resolved fluorescence data in neat solvent and in the micelles yielded the phi(CS) values in the dilute micellar solutions. Application of laser-induced optoacoustic spectroscopy at various temperatures to 1 dissolved in a polar organic solvent (benzonitrile, BZN) included in aqueous DTAB nanoreactors afforded structural volume changes for the production in hundreds of ps of the CS state upon excitation of a polar molecule. The contraction during CS formation upon excitation of the collapsed conformer in BZN is attributed to the entering of solvent into the open molecular cavity. The opening upon formation of the CS state due to photoinduced electron transfer in the 1 collapsed conformation arises from the repulsion of the two positively charged ends in this state, as previously calculated. Inclusion of 1 in reverse AOT micelles in various n-alkanes also led to a contraction upon excitation, but the data had much more error due to the limited range of variability of the ratio of thermoelastic parameters. The data obtained with the more flexible "supermolecule" 2 showed the predicted large conformation flexibility of these molecules.     

Lewis acid promoted aldol additions of α-thiosilylketeneacetals to α-alkoxy aldehydes: diastereoselective synthesis of syn-α-methylene-β-hydroxy-∂-alkoxy esters.

MgBr₂ mediated addition of Methyl α-methylthio propionate silylketene acetal to α and α,β-alkoxy aldehydes is highly 3,4 $\text{syn}$-selective (18:1). $\text{syn}$-α- methylene-β- hydroxy-?-alkoxy esters (6) and (8) are synthesized.     

Interaction between zigzag single-wall carbon nanotubes and polymers: a density-functional study

Density-functional all-electrons calculations within local-density approximation show that the two isoelectronic polymers poly(para-phenylene) and poly(para-borazylene) weakly interact with zigzag single-walled carbon nanotubes. The analysis of the electronic properties of the joint systems, both with the polymer inside and outside the nanotubes, reveals a physisorption process with small changes in band structures and densities of states with respect to the constituents. We evaluate the potential barrier arising between polymers and nanotubes. Finally, we remark a generic selectivity of poly(para-phenylene) with respect to the electronic behavior of nanotubes, leading to a change in the density of states of metallic tubules.