Effect of alkylimidazolium based ionic liquids on the structure of UV-irradiated cellulose

In this paper, the influence of three alkylimidazolium-based ionic liquids with the same cation (1-ethyl-3-methylimidazolium) and different anions (chloride, tetrafluoroborate and hexafluorophosphate) on the structure and properties of cellulose, have been studied by using Fourier transform infrared spectroscopy measurements, fluorescence microscopy imaging, viscometric and methylene blue sorption tests. Cellulose treated with ionic liquids showed better stability to UV light, as demonstrated by the lower variations of the polymerization degree, carboxyl groups content, moisture index, crystallinity index, lateral order index and allomorph index, with the increase of the UV exposure period, by comparing to non-treated cellulose. The results show that the tested ionic liquids could be effective as “green” plasticizers and UV stabilizers for cellulose-based materials.     

Immobilization of molecularly imprinted polymer nanoparticles in electrospun poly(vinyl alcohol) nanofibers

We describe the fabrication of polymer nanofibers with entrapped molecularly imprinted polymer (MIP) nanoparticles and study their possible use in a fluorescence-based biosensor application. The MIP was imprinted with the fluorescent amino acid derivative dansyl-L-phenylalanine. Poly(vinyl alcohol) was used as a support for MIP nanoparticles because it is water-soluble and can be spun into very thin fibers. The fibers were characterized by atomic force microscopy and optical microscopy, and fluorescence microscopy was used for the characterization of target binding to the MIP. The fibers show close to 100% recovery upon extraction and rebinding of the target molecule. The selectivity of the system has been demonstrated through competitive binding experiments with nonfluorescent analogues boc-L-phenylalanine and boc-D-phenylalanine.     

Charge transfer through modified peptide nucleic acids

We studied the charge transfer properties of bipyridine-modified peptide nucleic acid (PNA) in the absence and presence of Zn(II). Characterization of the PNA in solution showed that Zn(II) interacts with the bipyridine ligands, but the stability of the duplexes was not affected significantly by the binding of Zn(II). The charge transfer properties of these molecules were examined by electrochemistry for self-assembled monolayers of ferrocene-terminated PNAs and by conductive probe atomic force microscopy for cysteine-terminated PNAs. Both electrochemical and single molecular studies showed that the bipyridine modification and Zn(II) binding do not affect significantly the charge transfer of the PNA duplexes.     

Ultrasound-assisted pullulan/montmorillonite bionanocomposite coating with high oxygen barrier properties

In this paper, the preparation and characterization of oxygen barrier pullulan sodium montmorillonite (Na(+)-MMT) nanocomposite coatings are presented for the first time. Full exfoliation of platelets during preparation of the coating water dispersions was mediated by ultrasonic treatment, which turned out to be a pivotal factor in the oxygen barrier performance of the final material even at high relative humidity (RH) conditions [oxygen permeability coefficients ~1.43 ± 0.39 and 258.05 ± 13.78 mL·μm·m(-2)·(24 h)(-1)·atm(-1) at 23 °C and 0% RH and 70% RH, respectively]. At the micro- and nanoscale, the reasons are discussed. The final morphology of the coatings revealed that clay lamellae were stacked on top of one another, probably due to the forced confinement of the platelets within the coating thickness after solvent evaporation. This was also confirmed by modeling the experimental oxygen permeability data with the well-known Nielsen and Cussler permeation theoretical models, which suggested a reasonable aspect ratio (α) of ~100. Electron microscopic analyses also disclosed a peculiar cell-like arrangement of the platelets. The stacking of the clay lamellae and the cell-like arrangement create the excellent oxygen barrier properties. Finally, we demonstrated that the slight haze increase in the bionanocomposite coating materials arising from the addition of the clays depends on the clay concentration but not so much on the sonication time, due to the balance of opposite effects after sonication (an increase in the number of scattering centers but a reduction in their size).     

On the measurement of the fracture resistance of polyacrylamide hydrogels by wire cutting tests

The applicability of wire cutting in determining the fracture resistance, G_c, of polyacrylamide (PAAm) hydrogels, with different polymer contents and mechanical stiffness, was investigated. The various gels were synthesized both in the form of cylindrical and bar-shaped samples. Following the experimental scheme proposed in literature for wire cutting, each hydrogel, in the form of cylindrical specimen, was subjected to wire cutting with wires of different diameters. For each hydrogel, G_c was also separately measured by more conventional fracture tests on notched specimens prepared from the bar-shaped samples.The results demonstrated that, although G_c of the PAAm hydrogels here examined could not be evaluated by the direct application of the simple scheme proposed in literature, wire cutting is a promising approach for the measurement of the fracture resistance of chemical gels with relatively high stiffness, also in consideration of its proven experimental simplicity.     

Validation of <Superscript>239,240</Superscript>Pu, <Superscript>238</Superscript>Pu separation method using molecular recognition product AnaLig<Superscript>®</Superscript> Pu02 gel and extraction chromatography TRU<Superscript>®</Superscript> resin

Two separation techniques for plutonium determination using AnaLig^® Pu02 molecular recognition technology product (MRT) and extraction chromatography TRU^® resin were tested. The methods performance was investigated by analysis of National Physical Laboratory (NPL-Alpha-Beta High, ABH 2003, 2005) intercomparison test samples. The results obtained for both procedures were compared in terms of activities and recoveries. Data analysis showed good agreement with the reference values. The AnaLig^® Pu02 separation method for ^239,240Pu, ²³⁸Pu determination was successfully validated with the same performance as the TRU^® resin method.     

Photostability and skin penetration of different E-resveratrol-loaded supramolecular structures

It is desirable and challenging to prevent E-resveratrol (E-RSV) from photoisomerizing to its Z-configuration to preserve its biological and pharmacological activities. The aim of this research was to evaluate the photostability of E-RSV-loaded supramolecular structures and the skin penetration profile of chemically and physically stable nanoestructured formulations. Different supramolecular structures were developed to act as carriers for E-RSV, that is, liposomes, polymeric lipid-core nanocapsules and nanospheres and solid lipid nanoparticles. The degrees of photostability of these formulations were compared with that of an ethanolic solution of E-RSV. The skin penetration profiles of the stable formulations were obtained using vertical diffusion cells (protected from light and under UVA radiation) with porcine skin as the membrane, followed by tape stripping and separation of the viable epidermis and dermis in a heated water bath. Photoisomerization was significantly delayed by the association of resveratrol with the nanocarriers independently of the supramolecular structure. Liposomes were the particles capable of maintaining E-RSV concentration for the longest time. On the other hand, E-RSV-loaded liposomes reduced in size showing low physical stability under UVA radiation. In the dark, the skin penetration profiles were very similar, but under UVA radiation the E-RSV-loaded nanocarriers showed increasing amounts in the total epidermis.     

Enzymatic reduction of 9-methoxytariacuripyrone by Saccharomyces cerevisiae and its antimycobacterial activity

Biotransformation processes have been successfully utilized to obtain products of pharmaceutical, chemical, food, and agricultural interest, which are difficult to obtain by classic chemical methods. The compound with antituberculous activity, 9-methoxy-tariacuripyrone (1), isolated from Aristolochia brevipes, was submitted to biotransformation with the yeast Saccharomyces cerevisiae under culture, yielding 5-amino-9-methoxy-3,4-dihydro-2H-benzo[h]chromen-2-one (2). The structure of (2) was elucidated on the basis of spectroscopic analyses. The results mainly show the reduction of the double bond and the nitro group of compound (1). Metabolite (2) demonstrated an increase in anti-tuberculous activity (MIC = 3.12 μg/mL) against the drug-sensitive Mycobacterium tuberculosis (H37Rv) strain, with respect to that shown by (1).     

Conversion of methanol to hydrocarbons: how zeolite cavity and pore size controls product selectivity

Liquid hydrocarbon fuels play an essential part in the global energy chain, owing to their high energy density and easy transportability. Olefins play a similar role in the production of consumer goods. In a post-oil society, fuel and olefin production will rely on alternative carbon sources, such as biomass, coal, natural gas, and CO(2). The methanol-to-hydrocarbons (MTH) process is a key step in such routes, and can be tuned into production of gasoline-rich (methanol to gasoline; MTG) or olefin-rich (methanol to olefins; MTO) product mixtures by proper choice of catalyst and reaction conditions. This Review presents several commercial MTH projects that have recently been realized, and also fundamental research into the synthesis of microporous materials for the targeted variation of selectivity and lifetime of the catalysts.