Chemical modification of chitosan under high-intensity ultrasound

Chitosan (CTS), a biocompatible, biodegradable, non-toxic polymer, dissolves in water only if pH is lowered under 6.5, when a substantial fraction of the amino groups is protonated. Its range of application has been much extended by partially depolymerising it or converting it to water-soluble derivatives. Working under high-intensity ultrasound at 17.8-18.5 kHz, using either a simple horn or a cup horn, we achieved a controlled depolymerization of CTS, also prepared in high yields several derivatives that can be useful intermediates for further chemical modification, as well as several water-soluble derivatives that lend themselves to a host of industrial applications. Compared to conventional methods, all these reactions went to completion in considerably shorter times at lower temperatures.     

Online re-optimization of optical filters on a production sputter tool

This contribution presents a magnetron sputter deposition tool with broadband optical monitor and online re-optimization capability for high volume production. The layer termination relies on a comparison of the actually measured reflection spectrum with a pre-calculated target spectrum. Spectra recorded after each deposited layer are analyzed by the re-optimization module and in case of significant deviations layer thicknesses and target spectra for the remaining layers are recalculated. This technique significantly improves the performance and reproducibility in case of highly denlanding coating designs and is able to correct abnormal production errors in individual layers, which will lead to coating failure without re- optimization.     

Synthesis of carbon nanotubes by CVD: Effect of acetylene pressure on nanotubes characteristics

The effect of acetylene partial pressure on the structural and morphological properties of multi-walled carbon nanotubes (MWCNTs) synthesized by CVD on iron nanoparticles dispersed in a SiO₂ matrix as catalyst was investigated. The general growing conditions were: 110 cm³/min flow rate, 690 °C synthesis temperature, 180 Torr over pressure and two gas compositions: 2.5% and 10% C₂H₂/N₂. The catalyst and nanotubes were characterized by HR-TEM, SEM and DRX. TGA and DTA were also carried out to study degradation stages of synthesized CNTs. MWCNTs synthesized with low acetylene concentration are more regular and with a lower amount of amorphous carbon than those synthesized with a high concentration. During the synthesis of CNTs, amorphous carbon nanoparticles nucleate on the external wall of the nanotubes. At high acetylene concentration carbon nanoparticles grow, covering all CNTs’ surface, forming a compact coating. The combination of CNTs with this coating of amorphous carbon nanoparticles lead to a material with high decomposition temperature.     

Imaging spin-reorientation transitions in consecutive atomic Co layers on Ru(0001)

By means of spin-polarized low-energy electron microscopy, we show that the magnetic easy axis of one to three atomic-layer thick cobalt films on Ru(0001) changes its orientation twice during deposition: One-monolayer and three-monolayer thick films are magnetized in plane, while two-monolayer films are magnetized out of plane. The Curie temperatures of films thicker than one monolayer are well above room temperature. Fully relativistic calculations based on the screened Korringa-Kohn-Rostoker method demonstrate that only for two-monolayer cobalt films does the interplay between strain, surface, and interface effects lead to perpendicular magnetization.     

A longitudinal study of MR diffusion changes in normal appearing white matter of patients with early multiple sclerosis

BACKGROUND AND PURPOSE: The stage at which normal appearing white matter (NAWM) abnormalities first appear in multiple sclerosis (MS) is not clear. The aim of our study was to monitor water diffusion changes over time in NAWM of patients with early MS.METHODS: Out of a consecutive series of patients enrolled in a MR study on clinically isolated syndrome (CIS), we selected 19 subjects who had completed a one year follow-up. The MR scans obtained at baseline and at 12 months were reviewed according to the new criteria on the diagnosis of MS. Lesion load on T2 and T1 weighted images and the trace of the apparent diffusion coefficient in NAWM were measured both at baseline and at 12 months in patients and in 12 healthy controls.RESULTS: In three patients the diagnosis of MS was done at baseline based on MR. Thirteen patients developed MS during the study and in three patients the diagnosis remained "possible MS." TADC in NAWM in patients was significantly higher than in controls at the 12 months' follow-up but not at baseline (controls mean tADC +/- sd = 0.745 +/- 0.02 mm(2)/sec x 10(-3); patients mean tADC(12) +/- sd = 0.767 +/- 0.02 mm(2)/sec x 10(-3); p < 0.02). TADC and T2 lesion load at 12 months were significantly correlated (p < 0.01). Patients exhibiting tADC(12) above a confidence interval had a significantly greater EDSS score at the same time period (EDSS(12) +/- sd = 1.9 +/- 0.5 and = 1.1 +/- 0.4 respectively; p < 0.01).CONCLUSIONS: This study suggests that diffusion MR cannot detect alterations in NAWM of patients with a CIS suggestive of MS. After one year, when most patients develop MS, diffusion MR abnormalities in NAWM become apparent. These abnormalities are correlated with T2 lesion load and may contribute to neurological impairment.     

Broadly tunable dual-wavelength light source for coherent anti-Stokes Raman scattering microscopy

The signal and idler beams from a picosecond, synchronously pumped optical parametric oscillator (OPO) provide the two colors necessary for coherent anti-Stokes Raman scattering (CARS) microscopy. The OPO provides a continuously tunable frequency difference between the two beams over a broad range of Raman shifts (100-3700 cm(-1)) by varying the temperature of a single nonlinear crystal. The near-infrared output (900-1300 nm) allows for deep penetration into thick samples and reduced nonlinear photodamage. Applications of this light source to in vivo cell and ex vivo tissue imaging are demonstrated.     

The water-silicas interfacial interaction energies

The water-silicas interfacial interaction energies were calculated for samples of quartz, silicas and silicas outgassed at high temperatures using own and published data of the spreading pressure of water, its surface tension, its contact angle and using formulas obtained by the combination of the Young equation with a general equation of pair interaction. The values obtained for 18 different samples were in the range 7.80-6.92 kJ mol⁻¹. Lower values of energies are for samples that contain relatively less amounts of water at P/P₀ = 0.25 and are characterized also by relatively low values of surface pressures.     

AFM, SEM and GIXRD studies of thin films of red polycarbazolyldiacetylenes

In this paper we report the results of a morphological and structural investigation on film properties of a soluble polydiacetylene, the poly[1,6-bis(3,6-dihexadecyl-N-carbazolyl)-2,4-hexadiyne] (polyDCHD-HS). The red films of this polymer, prepared by standard spin-coating techniques, revealed absence of linear dichroism and birefringence in contrast with the ordered mesophases detected by powder X-ray studies. In order to interpret the optical behavior of this polymer, we performed AFM and SEM studies of polyDCHD-HS films spun on hydrophylic and hydrophobic glass substrates. We found the presence of surfaces organized in rod-like particles, more regularly oriented on the hydrophylic substrate. GIXRD studies, carried out on films sufficiently thick to allow the observation of the diffraction pattern, reveled the presence of a lamellar structure with a spacing of 3.22 nm. The low intensity of the diffraction peaks and the isotropic linear optical properties of the films show that the lamellar mesophases are not extended over large areas. These findings were compared with the data obtained from AFM and SEM studies on films of two other polydiacetylenes, the poly[1-(3,6-dihexadexyl-N-carbazolyl)-6-(N-carbazolyl)-2,4-hexadyine] (polya-DCHD) and the poly[1,6-bis(3,6-dipalmitoyl-N-carbazolyl)-2,4-hexadyine] (polyDPCHD), spun on hydrophylic glass substrate. The results confirmed the presence of nodular morphologies which seem to be a general characteristic of this class of materials. The particles organization appears instead related to the chemical nature of the substituents on the carbazolyl rings.     

Cryopreservation of embryogenic cultures from mature Quercus suber trees using vitrification

Recent progress in somatic embryogenesis from selected mature trees of Quercus suber, has led to a demand for maintenance of a large number of selected embryogenic lines. To facilitate the management of this material a protocol for the long-term storage of this germplasm should be defined. This study reports on the use of a simple vitrification procedure for the successful cryopreservation of three cork oak embryogenic lines. High embryo recovery levels (88-93 percent) were obtained by first preculturing 2-4 mg clumps of two or three globular embryos on semisolid medium containing 0.3 M sucrose for three days, followed by incubation in PVS2 vitrification solution at 0 degree C for 60 min before direct immersion in liquid nitrogen. The mean number of embryos produced per explant was significantly greater for cryostored embryos than for untreated stock cultures, but the productivity of the latter was recovered in subsequent subcultures of the material produced by cryostored embryos. The germination and plant regeneration rates achieved by cultures derived from cryostored embryos, around 60 percent, were similar to those of non-cryopreserved stock cultures.     

Accurate sensitivity in optically preamplified direct detection

We present a novel model for calculating the bit error rate in optical communication systems in the case of on-off keying intensity modulation and optically preamplified direct detection. The model accounts for the intersymbol interference and is based on the Laguerre photon-count probability distribution predicted by photodetection theory. For a non-return-to-zero modulation format an accurate value of the sensitivity for a quantum-limited receiver of 33.9 photons/bit is obtained.