Characterization of nanochannel delivery membrane systems for the sustained release of resveratrol and atorvastatin: new perspectives on promoting heart health

Novel drug delivery systems capable of continuous sustained release of therapeutics have been studied extensively for use in the prevention and management of chronic diseases. The use of these systems holds promise as a means to achieve higher patient compliance while improving therapeutic index and reducing systemic toxicity. In this work, an implantable nanochannel drug delivery system (nDS) is characterized and evaluated for the long-term sustained release of atorvastatin (ATS) and trans-resveratrol (t-RES), compounds with a proven role in managing atherogenic dyslipidemia and promoting cardioprotection. The primary mediators of drug release in the nDS are nanofluidic membranes with hundreds of thousands of nanochannels (up to 100,000/mm²) that attain zero-order release kinetics by exploiting nanoconfinement and molecule-to-surface interactions that dominate diffusive transport at the nanoscale. These membranes were characterized using gas flow analysis, acetone diffusion, and scanning and transmission electron microscopy (SEM, TEM). The surface properties of the dielectric materials lining the nanochannels, SiO₂ and low-stress silicon nitride, were further investigated using surface charge analysis. Continuous, sustained in vitro release for both ATS and t-RES was established for durations exceeding 1 month. Finally, the influence of the membranes on cell viability was assessed using human microvascular endothelial cells. Morphology changes and adhesion to the surface were analyzed using SEM, while an MTT proliferation assay was used to determine the cell viability. The nanochannel delivery approach, here demonstrated in vitro, not only possesses all requirements for large-scale high-yield industrial fabrication, but also presents the key components for a rapid clinical translation as an implantable delivery system for the sustained administration of cardioprotectants.     

Electrochemical detection of miRNA-222 by use of a magnetic bead-based bioassay

MicroRNAs (miRNAs, miRs) are naturally occurring small RNAs (approximately 22 nucleotides in length) that have critical functions in a variety of biological processes, including tumorigenesis. They are an important target for detection technology for future medical diagnostics. In this paper we report an electrochemical method for miRNA detection based on paramagnetic beads and enzyme amplification. In particular, miR 222 was chosen as model sequence, because of its involvement in brain, lung, and liver cancers. The proposed bioassay is based on biotinylated DNA capture probes immobilized on streptavidin-coated paramagnetic beads. Total RNA was extracted from the cell sample, enriched for small RNA, biotinylated, and then hybridized with the capture probe on the beads. The beads were then incubated with streptavidin–alkaline phosphatase and exposed to the appropriate enzymatic substrate. The product of the enzymatic reaction was electrochemically monitored. The assay was finally tested with a compact microfluidic device which enables multiplexed analysis of eight different samples with a detection limit of 7 pmol L^?1 and RSD?=?15 %. RNA samples from non-small-cell lung cancer and glioblastoma cell lines were also analyzed.     

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

The application of an experimental approach based on the load separation criterion for the determination of the point of fracture initiation in a fracture test on a ductile polymer was critically examined. To this aim, the fracture process outlined by the application of this method was related to that described by the visual analysis of the fracture surfaces obtained in fracture tests on nominally identical specimens, in which different levels of crack extension were produced. The material examined was an acrylonitrile-butadiene-styrene (ABS) resin, and the fracture tests were performed at low loading rate on single-edge notched in bending specimens.The results demonstrated that this load separation criterion based methodology is a promising approach for the determination of the point of fracture initiation, and for material fracture resistance, J_Ic, evaluation. The method also has experimental simplicity and a high degree of repeatability.     

Trace elements in sediments and bioaccumulation in European silver eels (Anguilla anguilla L.) from a Mediterranean lagoon (SE Italy)

Samples of surface sediments and tissues (liver and muscle) of commercially available European silver eels (Anguilla anguilla L.) collected from Varano lagoon (Italy) were analysed to determine trace element contents. Univariate and multivariate analyses were performed to highlight both the differences between sampling sites and the influence of channel discharges. Atomic ratios indices for sediment data and biological enrichment factors (BEF) for eel tissues were calculated in order to evaluate the enrichment factor due to human activities. The highest levels of As (11.9?µg?g^?1) and Zn (14.1?µg?g^?1) were observed in the south-eastern zone of the lagoon, which is influenced by urban and agricultural discharges. The low levels of Hg observed in this study (0.04?µg?g^?1) led us to exclude both natural and human local sources of this element. Trace element concentrations of all elements were lower in muscle than in liver tissue. Significant enrichment of Cu and Zn was found in livers.     

Gold‐Decorated Chiral Macroporous Films by the Self‐Assembly of Functionalised Block Copolymers

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self‐assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N?P(R‐O₂C₂₀H₁₂)_0.9(FG)_0.2]_n‐b‐[N?PMePh]_m (FG=‐OC₅H₄N ( 6 ), ‐NC₄H₈S ( 7 ), and ‐NC₄H₈O ( 8 )), was accomplished by the sequential living cationic polycondensation of N‐silylphosphoranimines, using the mono‐end‐capped initiator [Ph₃P?N?PCl₃][Cl] ( 3 ). The self‐assembly of the phosphazene BCPs 6 – 8 led to chiral porous films. The functionality present on those polymers affected their self‐assembly behaviour resulting in the formation of pores of different diameters (D_n=111 ( 6 ), 53 ( 7 ) and 77 nm ( 8 )). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7 , having pyridine and thiomorpholine groups, respectively, were treated with HAuCl₄, followed by reduction with NaBH₄, yielding a new type of block copolyphosphazenes, which self‐assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.     

Development and validation of a capillary electrophoresis method for determination of enantiomeric purity and related substances of esomeprazole in raw material and pellets

A capillary electrophoresis method using CDs for quality control of esomeprazole (ESO) in terms of enantiomeric purity and related substances in raw material and pellets was developed. ESO is the S‐enantiomer of omeprazole (OMZ). Several parameters were evaluated, including type and concentration of buffer and CD, concentration of additives and electrolyte pH. Resolution between the enantiomers of OMZ obtained for each parameter tested was calculated and the presence of the main related substance such as OMZ sulfone was carefully monitored. The optimized system consisted of 100 mM Tris‐phosphate buffer pH 2.5 with 20 mM 2‐hydroxypropyl‐β‐CD, 1 mM sodium dithionite, temperature at 15°C, voltage at 28 kV, and UV detection at 301 nm. Once optimized, the electrophoretic system was validated according to ICH guidelines. The limits of detection and quantification for R‐OMZ were 0.6 μg/mL (0.06% w/w of ESO) and 2.0 μg/mL (0.2% w/w of ESO), respectively. A mean concentration of R‐OMZ <0.2% limit established by the United States Pharmacopeia (USP) was found in the raw material and six‐pellet samples of ESO. No other impurities were found in the samples under these conditions. Therefore, the developed method was found to be appropriate not only for enantiomeric quality control of ESO but also for the analysis of ESO and the main related substance in raw material and pharmaceutical formulations as well as for stability indicating studies.     

Equalizer technology followed by DIGE‐based proteomics for detection of cellular proteins in artificial peritoneal dialysis effluents

Peritoneal dialysis effluent (PDE) represents a rich pool of potential biomarkers for monitoring disease and therapy. Until now, proteomic studies have been hindered by the plasma‐like composition of the PDE. Beads covered with a peptide library are a promising approach to remove high abundant proteins and concentrate the sample in one step. In this study, a novel approach for proteomic biomarker identification in PDEs consisting of a depletion and concentration step followed by 2D gel based protein quantification was established. To prove this experimental concept a model system of artificial PDEs was established by spiking unused peritoneal dialysis (PD) fluids with cellular proteins reflecting control conditions or cell stress. Using this procedure, we were able to reduce the amount of high abundant plasma proteins and concentrate low abundant proteins while preserving changes in abundance of proteins with cellular origin. The alterations in abundance of the investigated marker for cell stress, the heat shock proteins, showed similar abundance profiles in the artificial PDE as in pure cell culture samples. Our results demonstrate the efficacy of this system in detecting subtle changes in cellular protein expression triggered by unphysiological stress stimuli typical in PD, which could serve as biomarkers. Further studies using patients’ PDE will be necessary to prove the concept in clinical PD and to assess whether this technique is also informative regarding enriching low abundant plasma derived protein biomarker in the PDE.     

A general synthesis of diversely substituted indazoles and hetero-aromatic derivatives from o-halo-(het)arylaldehydes or -phenones

A set of variously substituted indazoles and hetero-aromatic derivatives were synthesized from o-halo-(het)arylaldehydes using a palladium catalyzed amination followed by cyclization. Starting from phenones, this process was extended to give 3-substituted indazoles. Moreover, N-1-substituted-indazoles can be reached by this strategy using an optional selective N-1-alkylation step during the process. This methodology offers a general and easy route for the synthesis of regioselectively substituted indazoles.     

Synthesis of bifunctional chelating agents based on mono and diphosphonic derivatives of diethylenetriaminepentaacetic acid

Bifunctional chelating agents (BFCAs) are small molecules containing a chelating unit, able to strongly coordinate a metal ion, and a reactive functional group, devised to form a stable covalent bond with another molecule. BFCAs are widely employed since their conjugation to a suitable biomolecule (e.g., a peptide or an antibody) allows the synthesis of diagnostic or therapeutic agents that specifically target diseased tissue with metals or radiometals. For this reason, BFCAs find application in diagnostic imaging, molecular imaging, and radiotherapy of cancer. The synthesis of new BFCAs based on a diethylenetriaminepentaacetic acid (DTPA) structure in which one or two carboxylic groups are replaced with phosphonic units is described. The phosphonic group, aside from being a classical isostere of the carboxylic acid in coordination chemistry, allows to modulate the physico-chemical properties of the ligands and of the corresponding complexes.     

Development of a method for the determination of 93Zr and 94Nb in radioactive waste using TEVA® resin

The behaviour of ⁹⁵Zr and ⁹⁵Nb isotopes on TEVA^® resin column was studied. The influence of hydrofluoric, hydrochloric, oxalic and sulphuric acids on the separation and chemical yield of zirconium and niobium was tested. The method is suitable for the separation of ⁹³Zr and ⁹⁴Nb isotopes from hydrofluoric, hydrochloric and sulphuric acid by using different concentrations of the acid for the load or elutes solutions. Samples from reactor and fuel assemblies such as the control-rod connection rod, shielding/absorber parts of fuel rods, neutron in-core measurement channels, pressure vessel basic construction material and internal cladding, core barrel and reactor protection tube unit were analysed.