Usefulness of the direct coupling headspace-mass spectrometry for sensory quality characterization of virgin olive oil samples

The applicability of the headspace coupled to mass spectrometry for evaluation of the sensory quality of virgin olive oil samples is presented. The volatiles of the oil are directly transferred from the sample vial to the detector without chromatographic separation. The mass spectrum obtained can be considered as a fingerprint of the oil sample and can be used for classification purposes. After a training step with samples previously qualified following the official method, a classification model was created using the supervised technique soft independent modeling of class analogy (SIMCA). Eight negative (rancid, winey-vinegary, muddy sediment, hay-wood, vegetable water, earthy, fusty and musty-humidity) and three principal positive attributes (fruity, bitter and pungent) have been included in this study. With them, a classification model consisting of two main classes (extra- and lampante-virgin olive oil) was constructed. In addition, the unsupervised technique cluster analysis permited the discrimination among oils with different negative attributes. The proposed procedure has been applied to the classification of commercial samples (as extra- or lampante-virgin olive oils) and the results were compared with those provided by the expert's panel with acceptable correlation.     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.     

Divergent and solvent dependent reactions of 4-ethoxycarbonyl-3-methyl-1-tert-butoxycarbonyl-1,2-diaza-1,3-diene with enamines

Starting from 1-tert-butyloxycarbonyl-3-methyl-4-ethoxycarbonyl-1,2-diaza-1,3-diene and β,β,β and α,β-substituted enamines a careful choice of solvents and temperatures allows the divergent synthesis of 5,6-dihydro-4H-pyridazines, 2-(1-N-boc-hydrazono-ethyl)-4-pyrrolidin-1-yl-but-3-enoic acid ethyl ester, and 1-amino-pyrroles. Moreover, some interesting conclusions about the mechanism(s) of the reaction have been drawn by careful analysis of products' structure and distribution. Thus, the reaction may proceed through a stereospecific [4+2] cycloaddition mechanism giving rise to 5,6-dihydro-4H-pyridazines or by simple addition or domino addition/cyclization pathways affording, respectively, 2-(1-N-boc-hydrazono-ethyl)-4-pyrrolidin-1-yl-but-3-enoic acid ethyl ester and 1-amino-pyrroles (formally the [3+2] cycloaddition product).     

Microporous Molecular Materials from Dipeptides Containing Non‐proteinogenic Residues

Dipeptides with two hydrophobic side chains have proved to be an exceptional source of microporous organic materials, but since previous structures were limited to the incorporation of only proteinogenic residues, their full potential as adsorbents has remained unexplored. Single‐crystal XRD data for ten new compounds with non‐proteinogenic L ‐2‐aminobutanoic acid and/or L ‐2‐amino‐pentanoic acid are presented. The gas‐phase accessibility of their crystal pores, with cross‐sections of 2.3 to 5.1 Å, was monitored by CO₂ and CH₄ adsorption isotherms. Included CO₂ was also detected spectroscopically by 2D MAS NMR. An extensive conformational analysis reveals that the use of linear rather than branched side chains (such as L ‐valine and L ‐isoleucine) affords peptides with a greater degree of conformational freedom and yields more‐flexible channel surfaces that may easily adapt to a series of potential guest molecules.     

Asymmetric Synthesis of Fluorinated Isoindolinones through Palladium‐Catalyzed Carbonylative Amination of Enantioenriched Benzylic Carbamates

The asymmetric synthesis of fluorinated isoindolinones has been achieved by a palladium‐catalyzed aminocarbonylation reaction of the corresponding α‐fluoroalkyl o‐iodobenzylamines. A base‐mediated anti β‐hydride elimination process was suggested to explain the partial erosion of the optical purity observed in some cases. This mechanistic rationale enabled the minimization of this partial racemization by fine‐tuning the pK_a of the base.     

Supercritical fluid chromatography with photodiode array detection for pesticide analysis in papaya and avocado samples

To improve the analysis of pesticides in complex food matrices with economic importance, alternative chromatographic techniques, such as supercritical fluid chromatography, can be used. Supercritical fluid chromatography has barely been applied for pesticide analysis in food matrices. In this paper, an analytical method using supercritical fluid chromatography coupled to a photodiode array detection has been established for the first time for the quantification of pesticides in papaya and avocado. The extraction of methyl parathion, atrazine, ametryn, carbofuran, and carbaryl was performed through the quick, easy, cheap, effective, rugged, and safe methodology. The method was validated using papaya and avocado samples. For papaya, the correlation coefficient values were higher than 0.99; limits of detection and quantification ranged from 130–380 and 220–640 μg/kg, respectively; recovery values ranged from 72.8–94.6%; precision was lower than 3%. For avocado, limit of detection values were ?450 μg/kg; precision was lower than 11%; recoveries ranged from 50.0–94.2%. Method feasibility was tested for lime, banana, mango, and melon samples. Our results demonstrate that the proposed method is applicable to methyl parathion, atrazine, ametryn, and carbaryl, toxics pesticides used worldwide. The methodology presented in this work could be applicable to other fruits.     

The inconsistency in adsorption properties and powder XRD data of MOF-5 is rationalized by framework interpenetration and the presence of organic and inorganic species in the nanocavities

MOF-5 is the archetype metal-organic framework and has been subjected to numerous studies the past few years. The focal point of this report is the pitfalls related to the MOF-5 phase identification based on powder XRD data. A broad set of conditions and procedures have been reported for MOF-5 synthesis. These variations have led to materials with substantially different adsorption properties (specific surface areas in the range 700 to 3400 m(2)/g). The relatively low weight loss observed for some as synthesized samples upon solvent removal is also indicative of a low pore volume. Regrettably, these materials have all been described as MOF-5 without any further comments. Furthermore, the reported powder XRD patterns hint at structural differences: The variations in surface area are accompanied by peak splitting phenomena and rather pronounced changes in the relative peak intensities in the powder XRD patterns. In this work, we use single-crystal XRD to investigate structural differences between low and high surface area MOF-5. The low surface area MOF-5 sample had two different classes of crystals. For the dominant phase, Zn(OH)2 species partly occupied the cavities. The presence of Zn species makes the hosting cavity and possibly also adjacent cavities inaccessible and thus efficiently reduces the pore volume of the material. Furthermore, the minor phase consisted of doubly interpenetrated MOF-5 networks, which lowers the adsorption capacity. The presence of Zn species and lattice interpenetration changes the symmetry from cubic to trigonal and explains the peak splitting observed in the powder XRD patterns. Pore-filling effects from the Zn species (and partly the solvent molecules) are also responsible for the pronounced variations in powder XRD peak intensities. This latter conclusion is particularly useful for predicting the adsorption properties of a MOF-5-type material from powder XRD.     

Field effect transistors with organic semiconductor layers assembled from aqueous colloidal nanocomposites

We demonstrate field effect transistors based on organic semiconductor molecules dispersed in a self-organized polystyrene (PS) latex bead matrix. An aqueous colloidal composite made of PS and tetrahexylsexithiophene (H4T6) is deposited with a micropipet into the channel of a bottom-contact field effect transistor. The beads self-organize into a network whose characteristic distances are governed by their packing. The semiconductor molecules crystallize in the interstitial voids, leading to the growth of large interconnected domains. Depending on the bead size and the ratio between H4T6 and PS, the fraction of the different phases in the polymorph can be controlled. In the transistors where the H4T6 metastable "red phase" is the largest, the device response and the charge mobility are comparable to those of sexithienyl thin films grown by high-vacuum sublimation.     

Copper-carbene complexes as catalysts in the synthesis of functionalized styrenes and aliphatic alkenes

(NHC)-Cu (NHC = N-heterocyclic carbene) complexes efficiently catalyzed the methylenation of a variety of aliphatic and aromatic aldehydes and ketones in the presence of trimethylsilyldiazomethane, triphenylphosphine, and 2-propanol. The copper catalysts are not only inexpensive compared to rhodium complexes, but they also exhibit better functional group compatibility with aromatic aldehydes and ketones. Indeed very high yields were obtained for the formation of styrenes containing nitro, trifluoromethyl, amino, and ester groups, as well as for pyridine-, pyrrole-, and indole-substituted alkenes.