Synthesis of crosslinked nanostructured saccharidic vinyl copolymers and their functionalization

Saccharidic monomers and a macromonomer were synthesized and copolymerized in the presence of divinylbenzene (DVB) as crosslinker in conditions of separation of phases to give hydrophilic nanostructured sugar-based vinyl copolymers. Appropriate model molecules such as N-benzyl-d-gluconamide for the saccharidic copolymers and 4-(4-chlorobutoxy)benzaldehyde and (E)-4-(4-chloro-2-butenyloxy)benzaldehyde for electrophilic reagents prefiguring possible copper amine oxidase inhibitors allowed identification of conditions for useful monofunctionalizations mainly at the position 2 of the saccharidic units. The examined samples of the nanostructured copolymers from one of the monomers proved to be stable enough to tolerate the functionalization reactions without loss of morphology.     

2-substituted benzofuran fragment ion formation in the electron ionization mass spectra of 6-alkyl- and 6-aryldibenzo(d,f)(1,3)dioxepine derivatives. 1. Spirocyclization of the molecular ions in the gas phase

The formation of 2-substituted benzo[b]furan ions in the electron ionization (EI) mass spectra of a series of 6-alkyl- and 6-aryldibenzo(d,f)(1,3)dioxepines has been studied by means of exact mass measurements and multiple-stage mass spectrometry conditions using an ion trap mass spectrometer. The proposed mechanism of formation of benzo[b]furan ions requires the formation of a spirocyclic cyclohexadienone system, which undergoes elimination of a cyclopentadienone molecule. A parallel with the chemical conversion of arylmethyl-substituted dibenzo(d,f)(1,3)dioxepines into an analogous spirocyclic system was also underlined.     

Amidine- and Amidoxime-Substituted Heterocycles: Synthesis,Antiproliferative Evaluations and DNA Binding

The novel 1,2,3-triazolyl-appended N- and O-heterocycles containing amidine 4–11 and amidoxime 12–22 moiety were prepared and evaluated for their antiproliferative activities in vitro. Among the series of amidine-substituted heterocycles, aromatic diamidine 5 and coumarine amidine 11 had the most potent growth-inhibitory effect on cervical carcinoma (HeLa), hepatocellular carcinoma (HepG2) and colorectal adenocarcinoma (SW620), with IC₅₀ values in the nM range. Although compound 5 was toxic to non-tumor HFF cells, compound 11 showed certain selectivity. From the amidoxime series, quinoline amidoximes 18 and 20 showed antiproliferative effects on lung adenocarcinoma (A549), HeLa and SW620 cells emphasizing compound 20 that exhibited no cytostatic effect on normal HFF fibroblasts. Results of CD titrations and thermal melting experiments indicated that compounds 5 and 10 most likely bind inside the minor groove of AT-DNA and intercalate into AU-RNA. Compounds 6, 9 and 11 bind to AT-DNA with mixed binding mode, most probably minor groove binding accompanied with aggregate binding along the DNA backbone.     

Production of Cellulolytic Enzymes by <Emphasis Type="Italic">Aspergillus phoenicis</Emphasis> in Grape Waste using Response Surface Methodology

The production of cellulolytic enzymes by the fungus Aspergillus phoenicis was investigated. Grape waste from the winemaking industry was chosen as the growth substrate among several agro-industrial byproducts. A 2 × 2 central composite design was performed, utilizing the amount of grape waste and peptone as independent variables. The fungus was cultivated in submerged fermentation at 30 °C and 120 rpm for 120 h, and the activities of total cellulases, endoglucanases, and β-glucosidases were measured. Total cellulases were positively influenced by the linear increase of peptone concentration and decrease at axial concentrations of grape waste and peptone. Maximum activity of endoglucanase was observed by a linear increase of both grape waste and peptone concentrations. Concentrations of grape waste between 5 and 15 g/L had a positive effect on the production of β-glucosidase; peptone had no significant effects. The optimum production of the three cellulolytic activities was observed at values near the central point. A. phoenicis has the potential for the production of cellulases utilizing grape waste as the growth substrate.     

Fast sequential multi-element determination of Ca,Mg, K,Cu, Fe,Mn and Zn for foliar diagnosis using high-resolution continuum source flame atomic absorption spectrometry: Feasibility of secondary lines,side pixel registration and least-squares background correction

The fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn in plant tissues by high-resolution continuum source flame atomic absorption spectrometry is proposed. For this, the main lines for Cu (324.754 nm), Fe (248.327 nm), Mn (279.482 nm) and Zn (213.857 nm) were selected, and the secondary lines for Ca (239.856 nm), Mg (202.582 nm) and K (404.414 nm) were evaluated. The side pixel registration approach was studied to reduce sensitivity and extend the linear working range for Mg by measuring at wings (202.576 nm; 202.577 nm; 202.578 nm; 202.580 nm; 202.585 nm; 202.586 nm; 202.587 nm; 202.588 nm) of the secondary line. The interference caused by NO bands on Zn at 213.857 nm was removed using the least-squares background correction. Using the main lines for Cu, Fe, Mn and Zn, secondary lines for Ca and K, and line wing at 202.588 nm for Mg, and 5 mL min^− 1 sample flow-rate, calibration curves in the 0.1–0.5 mg L^− 1 Cu, 0.5–4.0 mg L^− 1 Fe, 0.5–4.0 mg L^− 1 Mn, 0.2–1.0 mg L^− 1 Zn, 10.0–100.0 mg L^− 1 Ca, 5.0–40.0 mg L^− 1 Mg and 50.0–250.0 mg L^− 1 K ranges were consistently obtained. Accuracy and precision were evaluated after analysis of five plant standard reference materials. Results were in agreement at a 95% confidence level (paired t-test) with certified values. The proposed method was applied to digests of sugar-cane leaves and results were close to those obtained by line-source flame atomic absorption spectrometry. Recoveries of Ca, Mg, K, Cu, Fe, Mn and Zn in the 89–103%, 84–107%, 87–103%, 85–105%, 92–106%, 91–114%, 96–114% intervals, respectively, were obtained. The limits of detection were 0.6 mg L^− 1 Ca, 0.4 mg L^− 1 Mg, 0.4 mg L^− 1 K, 7.7 µg L^− 1 Cu, 7.7 µg L^− 1 Fe, 1.5 µg L^− 1 Mn and 5.9 µg L^− 1 Zn.     

Photoinitiation rate profiles during polymerization of a dimethacrylate-based resin photoinitiated with camphorquinone/amine. Influence of initiator photobleaching rate

The photodecomposition of camphorquinone (CQ)/amine during the photo polymerization of a dimethacrylate-based resin under continuous irradiation was investigated in thick samples. The global CQ photoconsumption was measured by monitoring the decrease in light absorption as a function of irradiation time and the kinetics were satisfactory fitted to a first order expression where the rate constant of photobleaching was proportional to the irradiation intensity. In a thick sample, the photobleaching of the photoinitiator is accompanied by a deeper penetration of the light through the underlying layers. These gradients of photoinitiator concentration, light intensity and photoinitiation rate along the path of irradiation were calculated. The photodecomposition reaction was spatially inhomogeneous and the degree of nonuniformity increased with increased initial sample absorbance. The influence of the photobleaching process on the polymerization reaction was examined. The photobleaching rate of CQ was much slower than the polymerization rate and only 20% of the initial amount of CQ was consumed before the polymerization reaction had almost ceased. Results obtained in this research highlight the inherent interlinking of light attenuation and photobleaching rate in bulk polymerizing systems.     

Butene concentration prediction in ethylene/propylene/1-butene terpolymers by FT-IR spectroscopy through multivariate statistical analysis and artificial neural networks

This paper reports the development of calibration models for quality control in the production of ethylene/propylene/1-butene terpolymers by the use of multivariate tools and FT-IR spectroscopy.1-Butene concentration prediction is achieved in terpolymers by coupling FT-IR spectroscopy to multivariate regression tools. A dataset of 26 terpolymers (14 coming from a constrained experimental design for mixtures, plus 12 terpolymers used for external validation) was analysed by FT-IR spectroscopy. An internal method of “Polimeri Europa” plant, based on ¹³C NMR spectroscopy is used to determine the percentage of 1-butene in the samples. Then, different multivariate tools are used for 1-butene concentration prediction based on the FT-IR spectra recorded. Different multivariate calibration methods were explored: principal component regression (PCR), partial least squares (PLS), stepwise OLS regression (SWR) and artificial neural networks (ANNs). The model obtained by back-propagation neural networks turned out to be the best one. The performances of the BP-ANN model were further improved by variable selection procedures based on the calculation of the first derivative of the network.The proposed approach allows the monitoring in real time of the polymer synthesis and the estimation of the characteristics of the product attainable from the concentration of 1-butene.     

Homogeneous and heterogeneous olefin epoxidation catalyzed by a binuclear Mn(II)Mn(III) complex

The synthesis and characterization of a binuclear carboxylated bridged manganese complex containing the heptadentate ligand N,N′-bis(2-hydroxybenzyl)-N,N′-bis(2-methylpyridyl)-2-ol-1,3-propanediamine (H₃bbppnol) is reported. This complex was characterized by elemental analysis; infrared, electronic (UV–vis) and EPR spectroscopy; and conductivity measurements. The complex was immobilized on silica by either adsorption or entrapment via a sol–gel route. The obtained solids were characterized by thermogravimetric analyses (TG and DSC), UV–vis and infrared spectroscopy, and X-ray diffraction. The catalytic performance of the binuclear manganese complex in epoxidation reactions was evaluated for both homogeneous and heterogeneous systems. The catalytic investigation revealed that the complex performs well as an epoxidation catalyst for the substrates cyclohexene (26–39%) and cyclooctene (29–74%). The solids containing the immobilized complex can be recovered from the reaction medium and reused, maintaining good catalytic activity.     

Enzyme-functionalized mesoporous silica for bioanalytical applications

The unique properties of mesoporous silica materials (MPs) have attracted substantial interest for use as enzyme-immobilization matrices. These features include high surface area, chemical, thermal, and mechanical stability, highly uniform pore distribution and tunable pore size, high adsorption capacity, and an ordered porous network for free diffusion of substrates and reaction products. Research demonstrated that enzymes encapsulated or entrapped in MPs retain their biocatalytic activity and are more stable than enzymes in solution. This review discusses recent advances in the study and use of mesoporous silica for enzyme immobilization and application in biosensor technology. Different types of MPs, their morphological and structural characteristics, and strategies used for their functionalization with enzymes are discussed. Finally, prospective and potential benefits of these materials for bioanalytical applications and biosensor technology are also presented. Figure Enzyme-functionalized mesoporous silica fibers and their integration in a biosensor design. The immobilization process takes place essentially in the silica micropores.     

Controlled coherent dynamics of [VO(TPP)], a prototype molecular nuclear qudit with an electronic ancilla

We show that [VO(TPP)] (vanadyl tetraphenylporphyrinate) is a promising system to implement quantum computation algorithms based on encoding information in multi-level (qudit) units. Indeed, it embeds a nuclear spin 7/2 coupled to an electronic spin 1/2 by hyperfine interaction. This qubit–qudit unit can be exploited to implement quantum error correction and quantum simulation algorithms. Through a combined theoretical and broadband nuclear magnetic resonance study, we demonstrate that the elementary operations of such algorithms can be efficiently implemented on the nuclear spin qudit. Manipulation of the nuclear qudit can be achieved by resonant radio-frequency pulses, thanks to the remarkably long coherence times and the effective quadrupolar coupling induced by the strong hyperfine interaction. This approach may open new perspectives for developing new molecular qubit–qudit systems.

By a combined theoretical and broadband nuclear magnetic resonance study, we show that [VOTPP] is a coupled electronic qubit-nuclear qudit system suitable to implement qudit-based quantum error correction and quantum simulation algorithms.