Determination of alpha contaminated soil profiles using Nuclear Track Detectors

Nuclear Track Detectors (NTD's) are a useful option forin situ measurements of the distribution of alpha contamination as a function of soil depth. The contamination profile of alpha emitting elements, e.g. Pu, Am and U, can be determined by detecting their alpha emission at varying depths. This paper discusses a stake type device, containing strips of CR-39 (allyl diglycol carbonate) that can be inserted into the soil up to ten centimeters or more, depending on the firmness of the soil. The CR-39 is exposed directly to the contaminated soil for a few hours. The stake is then withdrawn from the soil, the plastic detectors recovered and the alpha tracks developed by chemical etching with KOH. The distribution of tracks can be used to determine the alpha contamination depth profile as well as for detecting hot spots. It has a sensitivity of less than a pCi/g of soil.Work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract W-7405-ENG-48.     

Oxygen isotope corrections for online delta(34)S analysis

Elemental analyzers have been successfully coupled to stable-isotope-ratio mass spectrometers for online measurements of the delta(34)S isotopic composition of plants, animals and soils. We found that the online technology for automated delta(34)S isotopic determinations did not yield reproducible oxygen isotopic compositions in the SO(2) produced, and as a result calculated delta(34)S values were often 1-3 per thousand too high versus their correct values, particularly for plant and animal samples with high C/S ratio. Here we provide empirical and analytical methods for correcting the S isotope values for oxygen isotope variations, and further detail a new SO(2)-SiO(2) buffering method that minimizes detrimental oxygen isotope variations in SO(2).     

A spot test for the detection of periodate

Perrhenate is quantitatively extracted into methyl isobutyl ketone from aqueous solutions containing copper(II), azide and an excess of 2,2'-bipyridine. Measurement of the extracted copper either by spectrophotometry or by atomic absorption spectrometry, allows the determination of perrhenate in the ranges 16–40 μg ml⁻¹ or 3–16 μg ml⁻¹ in the final dilution, respectively. The procedure is highly selective, being applicable in the presence of a large concentration of molybdate and a considerable number of foreign ions. The extracted species corresponds to the formula CuN₃(bipy)₂ ReO₄.     

Selenium redox cycling in the protective effects of organoselenides against oxidant-induced DNA damage

The biological role of selenium is a subject of intense current interest, and the antioxidant activity of selenoenzymes is now known to be dependent upon redox cycling of selenium within their active sites. Exogenously supplied or metabolically generated organoselenium compounds, capable of propagating a selenium redox cycle, might therefore supplement natural cellular defenses against the oxidizing agents generated during metabolism. We now report evidence that selenium redox cycling can enhance the protective effects of organoselenium compounds against oxidant-induced DNA damage. Phenylaminoethyl selenides were found to protect plasmid DNA from peroxynitrite-mediated damage by scavenging this powerful cellular oxidant and forming phenylaminoethyl selenoxides as the sole selenium-containing products. The redox properties of these organoselenoxide compounds were investigated, and the first redox potentials of selenoxides in the literature are reported here. Rate constants were determined for the reactions of the selenoxides with cellular reductants such as glutathione (GSH). These kinetic data were then used in a MatLab simulation, which showed the feasibility of selenium redox cycling by GSH in the presence of the cellular oxidant, peroxynitrite. Experiments were then carried out in which peroxynitrite-mediated plasmid DNA nick formation in the presence or absence of organoselenium compounds and GSH was monitored. The results demonstrate that GSH-mediated redox cycling of selenium enhances the protective effects of phenylaminoethyl selenides against peroxynitrite-induced DNA damage.     

Effects in high-performance liquid chromatography of a high pH in the mobile phase on poly(methyloctylsiloxane) immobilized by gamma-radiation on titanium-grafted silica

Effects of high-pH environments on a stationary phase prepared by gamma-radiation immobilization of poly(methyloctylsiloxane) on titanium-grafted silica were investigated by HPLC testing with standard sample mixtures. The HPLC parameters indicate good stationary phase stability to 10000 column volumes each of mobile phases with pH of 7, 9 and 12. At pH 13, the efficiency decreases slowly, although reasonably good separations are still possible until increasing flow resistance no longer allows easy passage of the mobile phase.     

Determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder by flow injection analysis with spectrophotometric detection

In this work, a flow injection system with spectrophotometric detection was developed for the determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder. Reaction between Quinizarine (1,4-dihydroxyanthraquinone) and Li(I) ion in alkaline medium containing dimethylsulfoxide (DMSO) was explored for this purpose. The flow system was optimized regarding to its chemical (DMSO, Quinizarine and NaOH concentrations and sample pH) and physical parameters (sample loop volume, carrier flow rate and reactor length) in order to establish better conditions in terms of sensitivity and sampling frequency. The results obtained showed that the concentration of DMSO in the reagent solution presents remarkable influence on the magnitude of analytical signal. Chemical species that could be found in the formulations such as Na(I), K(I), Mg(II), Ca(II), Ti(IV), Cl⁻, CO₃²⁻ e sodium dodecylsulfate were tested as possible interfering ions. Among them, only non-monovalent cations presented noticeable interference on lithium signal. However, they were not found in concentrations high enough to cause interference in the determination of lithium in the samples. Sample preparation was performed by sonicating a slurry prepared by dispersing 100 mg of powdered sample in 15 mL of 0.10 mol L⁻¹ HCl solution. Results obtained by developed methodology were not statistically different from those obtained by flame emission spectrometry. In the optimized conditions the method presented a linear range of 5-40 mg L⁻¹ and a relative standard deviation of 3.6% at 5 mg L⁻¹ Li concentration. Detection and quantification limits were 0.54 and 1.8 mg L⁻¹, respectively. Sampling frequency, calculated as the time interval passed between two consecutive injections, was 60 samples per hour. The methodology was successfully applied in the determination of lithium in three commercial samples.     

Zur Kenntnis der Bis(dialkylamino)acyloxiborane

About Bis(dialkylamino)acyloxyboranes By reactions of bis(dialkylamino)bromoborane with potassium, lead, silver or trialkylammonium salts of corresponding carboxylic acids the above listed compounds have been prepared. Some properties of the compounds are described.     

Magnetic properties of Fe−Mn−Al alloy system in the FCC disordered phase

In this work we report the experimental studies of Fe?Mn?Al alloys in the FCC disordered phase at room temperature by Mössbauer spectroscopy and X-ray diffraction. In this phase the alloys are antiferromagnetic with a constant mean hyperfine field ( \(\bar H\) ) near 26 kOe in the composition range from 0 to 7.5 at.% Al and 50 to 65 at.% Fe. When the Al or Fe concentration increases, the \(\bar H\) value gradually decreases to zero and the alloy becomes paramagnetic. In the same way when the Al concentration increases the lattice parameter increases linearly but when the Fe concentration increases the lattice parameter remains nearly constant for alloys with 5 at.% Al and decreases for alloys with 10 at.% Al.