Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

Density-functional study of mechanisms for the cofactor-free decarboxylation performed by uroporphyrinogen III decarboxylase

Uroporphyrinogen III decarboxylase catalyzes the fifth step in heme biosynthesis: the elimination of carboxyl groups from the four acetate side chains of uroporphyrinogen III to yield coproporphyrinogen III. The enzyme acts by successively protonating each of the four pyrrole rings present in the substrate, thereby allowing decarboxylation of their side chains, but the identity of the proton donors has not been established yet. Tyr164 has been suggested as a proton donor, and Asp86 has been proposed to act either as a proton donor or as an intermediate-stabilizing residue. We have performed density-functional calculations to study this reaction mechanism, and found that the rate-limiting step is substrate protonation, rather than decarboxylation. Surprisingly, whereas Tyr164 is unable to protonate the substrate, this protonation can be effected by a nearby arginine residue (Arg37), with a free energy barrier of 21.4 kcal.mol(-1), in remarkable agreement with the experimental value of 19.5 kcal.mol(-1). The central positioning of this residue in close proximity to all four pyrrole rings in the substrate may play a key role in the sequential activation of each of these moieties.     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Neutron powder diffraction study of A2BeF4 (A=K, Rb, Cs): Structure refinement and analysis of background

The crystal structure of potassium, rubidium and caesium fluoroberyllates have been re-examined by neutron powder diffraction at room temperature and at 1.5 K. Previously, their structures, obtained from X-ray data, were described in the Pn2₁a space group. However, the results obtained from Rietveld refinements, using powder neutron diffraction, at both temperatures, indicated that all structures are orthorhombic with space group Pnma. The known phase transition at high temperature is probably related to the appearance of a hexagonal pseudo-symmetry instead of the elimination of the mirror plane between the above mentioned orthorhombic space groups. A possible phase transition, at very low temperature, was discarded considering the stereochemical criteria concerning the structural stability of A₂BX₄ compounds. This was confirmed by thermal analysis. On the other hand, a modulated background has been detected in all samples during the refinements. This is compatible with the presence of an amorphous phase, coexisting with the crystalline phase, or with a disordered component within the main crystalline phase. Instead of using a polynomial function, the background was modelled by Fourier filtering improving the fit for all patterns. The radial distribution function (RDF) was obtained from the analysis of the calculated background and compared with the RDF from the average crystal structure. The advantages of neutron with respect to X-ray diffraction were evidenced for this type of compound with β-K₂SO₄-type structure.     

Adsorption of crude oil on anhydrous and hydrophobized vermiculite

This publication reports the adsorption of crude oil on vermiculite samples, expanded and hydrophobized with carnauba (Copernícia Cerífera) wax. The adsorption studies were performed by using columns filled with the vermiculite matrices and by dispersion of the vermiculite samples in an oil-water (50 ppm of oil) emulsion. The hydrate vermiculite exhibits a very low adsorption capacity against crude oil. On the other hand, anhydrous (expanded) and hydrophobized matrices show a high adsorption capacity. The 10% hydrophobized matrix show a 50% increased adsorption capacity, in comparison with the expanded one. For adsorption performed in the water-oil emulsion, saturation of the solid hydrophobized matrix is achieved after 60 min. The hydrophobized samples exhibit adsorption factors in the 0.7-1.0 range.     

Determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder by flow injection analysis with spectrophotometric detection

In this work, a flow injection system with spectrophotometric detection was developed for the determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder. Reaction between Quinizarine (1,4-dihydroxyanthraquinone) and Li(I) ion in alkaline medium containing dimethylsulfoxide (DMSO) was explored for this purpose. The flow system was optimized regarding to its chemical (DMSO, Quinizarine and NaOH concentrations and sample pH) and physical parameters (sample loop volume, carrier flow rate and reactor length) in order to establish better conditions in terms of sensitivity and sampling frequency. The results obtained showed that the concentration of DMSO in the reagent solution presents remarkable influence on the magnitude of analytical signal. Chemical species that could be found in the formulations such as Na(I), K(I), Mg(II), Ca(II), Ti(IV), Cl⁻, CO₃²⁻ e sodium dodecylsulfate were tested as possible interfering ions. Among them, only non-monovalent cations presented noticeable interference on lithium signal. However, they were not found in concentrations high enough to cause interference in the determination of lithium in the samples. Sample preparation was performed by sonicating a slurry prepared by dispersing 100 mg of powdered sample in 15 mL of 0.10 mol L⁻¹ HCl solution. Results obtained by developed methodology were not statistically different from those obtained by flame emission spectrometry. In the optimized conditions the method presented a linear range of 5-40 mg L⁻¹ and a relative standard deviation of 3.6% at 5 mg L⁻¹ Li concentration. Detection and quantification limits were 0.54 and 1.8 mg L⁻¹, respectively. Sampling frequency, calculated as the time interval passed between two consecutive injections, was 60 samples per hour. The methodology was successfully applied in the determination of lithium in three commercial samples.     

Reduction of (imine)Pt(IV) to (imine)Pt(II) complexes with carbonyl-stabilized phosphorus ylides

A novel method is reported for generation of the difficult-to-obtain (imine)Pt(II) compounds that involves reduction of the corresponding readily available Pt(IV)-based imines by carbonyl-stabilized phosphorus ylides, Ph3P=CHCO2R, in nonaqueous media. The reaction between neutral (imino)Pt(IV) compounds [PtCl4[NH=C(Me)ON=CR1R2]2] [R1R2 = Me2, (CH2)4, (CH2)5, (Me)C(Me)=NOH], [PtCl4[NH=C(Me)ONR2]2] (R = Me, Et, CH2Ph), (R1 = H; R2 = Ph or C6H4Me; R3 = Me) as well as anionic-type platinum(IV) complexes (Ph3PCH2Ph)[PtCl5[NH=C(Me)ON=CR2]] [R2 = Me2, (CH2)4, (CH2)5] and 1 equiv of Ph3P=CHCO2R (R = Me, Et) proceeds under mild conditions (ca. 4 h, room temperature) to give selectively the platinum(II) products (in good to excellent isolated yields) without further reduction of the platinum center. All thus prepared compounds (excluding previously described Delta4-1,2,4-oxadiazoline complexes) were characterized by elemental analyses, FAB mass spectrometry, IR and 1H, 13C[1H], 31P[1H] and 195Pt NMR spectroscopies, and X-ray single-crystal diffractometry, the latter for [PtCl2[NH=C(Me)ON=CMe2]2] [crystal system tetragonal, space group P4(2)/n (No. 86), a = b = 10.5050(10) A, c = 15.916(3) A] and (Ph3PCH2CO2Me)[PtCl3(NCMe)] [crystal system orthorhombic, space group Pna2(1) (No. 33), a = 19.661(7) A, b = 12.486(4) A, c = 10.149(3) A]. The reaction is also extended to a variety of other Pt(II)/Pt(IV) couples, and the ylides Ph3P=CHCO2R are introduced as mild and selective reducing agents of wide applicability for the conversion of Pt(IV) to Pt(II) species in nonaqueous media, a route that is especially useful in the case of compounds that cannot be prepared directly from Pt(II) precursors, and for the generation of systematic series of Pt(II)/Pt(IV) complexes for biological studies.     

A theoretical study of radical-only and combined radical/carbocationic mechanisms of arachidonic acid cyclooxygenation by prostaglandin H synthase

Prostaglandin H synthase catalyzes the oxygenation of arachidonic acid into the cyclic endoperoxide, prostaglandin G₂ (PGG₂), and the subsequent reduction of PGG₂ to the corresponding alcohol, prostaglandin H₂ (PGH₂), the precursor of all prostaglandins and thromboxanes. Both radical abstraction by a neighboring tyrosyl radical and combined radical/carbocationic models have been proposed to explain the cyclooxygenase part of this reaction. We have used density functional theory calculations to study the mechanism of the formation of the cyclooxygenated product PGG₂. We found an activation free energy for the initial hydrogen abstraction by the tyrosine radical of 15.6 kcal/mol, and of 14.5 kcal/mol for peroxo bridge formation, in remarkable agreement with the experimental value of 15.0 kcal/mol. Subsequent steps of the radical-based mechanism were found to happen with smaller barriers. A combined radical/carbocation mechanism proceeding through a sigmatropic hydrogen shift was ruled out, owing to its much larger activation free energy of 36.5 kcal/mol. Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00214-003-0476-9. Electronic Supplementary MaterialSupplementary material is available in the online version of this article at Electronic Supplementary Material: Supplementary material is available in the online version of this article at     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

A synthetic approach to bicyclo[6.2.1]undecane ring systems

A synthesis of a functionalized bicyclo[6.2.1]undecane, N-(7-hydroxymethyl-bicyclo[6.2.1]undeca-3,5,9-trien-2-yl)-4-methyl-benzenesulfonamide, is described. Starting with a [6+4] cycloaddition between cyclopentadiene and cycloheptatrienone, the final product was prepared in five steps with an overall 37% yield. The remarkable resistance to hydrolysis of an intermediate lactam was overcome by tosylating the amide and reducing with LiAlH₄.