Study of the structural, dielectric and magnetic properties of Bi2O3 and PbO addition on BiFeO3 ceramic matrix

In this paper we studied the effects of Bi₂O₃ and PbO addition on BiFeO₃ (BFO) ceramic matrix. The structural, dielectric and magnetic properties of fifteen BFO samples were discussed in view of possible applications in RF and microwave devices. The present work also reports the preparation of the samples. Polyvinyl alcohol (PVA) and tetraethyl orthosilicate (TEOS) were also added as a binder in the fabrication procedure. The samples have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and magnetic hysteresis measurements. Further, a study based on impedance spectroscopy also has been done. Dielectric permittivity (ε′) and dielectric loss (tan δ) were measured at room temperature in the frequency range 100 Hz-10 MHz, as well as a.c. conductivity. The -Im[Z(f)] versus Re[Z(f)] plot has been obtained. The samples were investigated in view of possible applications like miniaturized filters, diplexers and dielectric resonator antennas (DRA). In the RF and MW frequency region, the application of magneto-dielectric and multiferroic perovskite composite materials is desirable for the miniaturization of components.     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.     

Psychoacoustics of in-car switch buttons: From feelings to engineering parameters

The car interior is becoming quieter and other sounds are now exposed to user perception, such as the sound produced by interface buttons when actuated. So, the functional role of the button sound on interface operation and its aesthetic and emotional role on the user experience are now more important than before. However, little research and design effort has been paid to understand how to design buttons that produce a pleasant sound. Moreover, the button’s sound requirements received by interface manufacturers are ill-defined, insufficient or even inexistent, and consequently their conversion into specifications for manufacturing is problematic and leads to long and costly development processes. The purpose of this paper is to contribute to identify relevant acoustic parameters that explain the users sound preferences. Data on preference subjective judgments were collected and buttons acoustic signals were measured allowing the development of preference models based on partial least squares regression and neural networks methods. The former was successful in selecting the relevant parameters to describe the preference ratings of the buttons sound. The later, dealing with the non-linear nature of acoustic perception, was able to predict preferences based on the relevant parameters.     

On the Massive Antenna Suspension System in the Brazilian Gravitational Wave Detector SCHENBERG

SCHENBERG is a resonant-mass gravitational wave detector built in Brazil. Its spherical antenna, weighting 1.15 t, is connected to the outside world by a suspension system whose main function is to attenuate the external seismic noise. In this work, we report how the system was modeled using finite elements method. The model was validated on experimental data. The simulation showed that the attenuation obtained is of the order of 260 dB, which is sufficient for decreasing the seismic noise below the level of the thermal noise of the detector operating at 50 mK.     

H2O2–Ng dynamics predictions using an accurate potential energy surface

ABSTRACT

Based on ab initio calculations, our research group has built an analytical ground-state potential energy surface (PES) for hydrogen peroxide– noble gas (Ng) interactions, such as H₂O₂–He, H₂O₂–Ne, H₂O₂–Ar, H₂O₂–Kr, and H₂O₂–Xe complexes. From this PES, it was verified that the Ng presence does not affect the equilibrium values of the H₂O₂ dihedral angles. This happens because the H₂O₂ intramolecular barriers have much higher energies than the atom–bond interaction within these complexes. From this point of view, it is indeed reasonable to consider the H₂O₂ system as a rigid rotor, frozen at its equilibrium configuration. We present in this work the torsional motion for the H₂O₂ isolated system, the vibration–rotation energy levels and spectroscopic constants for hydrogen peroxide–noble gas by using the aforementioned PES. The predicted H₂O₂ torsional motions are in good agreement with both theoretical and experimental results available in the literature. Regarding H₂O₂–Ng ro-vibrational energies and spectroscopic constants, it is the first time that these calculations are presented in the literature. The current theoretical predictions are expected to be useful in the future experimental investigations.     

Ferroelectric switching behavior of pulsed laser deposited Ba0.8Sr0.2TiO3 thin films

The effect of pulse amplitude on the ferroelectric and switching properties of pulsed laser deposited Ba_0.8Sr_0.2TiO₃ thin films has been studied. The structural and morphological analysis revealed that the films had a well crystallized perovskite phase and grain size of about 30–40 nm. A well saturated P–E hysteresis loop was observed with a remnant polarization (P_r) ≈ 4.8 μC/cm² and a coercive field ≈ 100 kV/cm at a frequency of 1 kHz. The P_r has been found to be decreased only 4.3% after passing 8.0 × 10⁸ cycles. The analysis of switching response with nucleation limited switching model reveals that characteristic switching time (t₀) variance is due to the random distribution of the local electric fields. The peak value of polarization current and t₀ exhibits exponential dependence on reciprocal of pulse amplitude.