New insights on the photophysical behavior of PRODAN in anionic and cationic reverse micelles: from which state or states does it emit?

6-propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe because of its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer states (ICT) that can be particularly useful as a sensor. The nature of the emissive states has not yet been established despite the detailed experimental and theoretical investigations done on this fluorophore. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES) and time-resolved area normalized emission (TRANES) spectroscopies on the molecular probe PRODAN in the anionic water/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane and the cationic water/benzyl-n-hexadecyl dimethylammonium chloride (BHDC)/benzene reverse micelles (RMs). The experiments were done by varying the surfactant concentrations at a fixed molar ratio (W = [H2O]/[Surfactant]) and changing the water content at a constant surfactant concentration. The results obtained varying the surfactant concentration at W = 0 show a bathochromic shift and an increase in the intensity of the PRODAN emission band due to the PRODAN partition process between the external solvent and the RMs interface. The partition constants, Kp, are quantified from the changes in the PRODAN emission spectra and the steady-state anisotropy () with the surfactant concentration in both RMs. The Kp value is larger in the BHDC than the AOT RMs, probably due to the interaction between the cationic polar head of the surfactant and the aromatic ring of PRODAN. The partition process is confirmed with the TRES experiments, where the data fit to a continuous model, and with the time-resolved area normalized emission spectroscopy (TRANES) spectra, where only one isoemissive point is detected. On the other hand, the emission spectra at W = 10 and 20 show a dual fluorescence with a new band that emerges in the low-energy region of the spectra, a band that was previously assigned to the PRODAN emission from the water pool of RMs. Our studies demonstrate that this band is due to the emission from an ICT state of the molecular probe PRODAN located at the interface of the RMs. These results are also confirmed by the lifetime measurements, the TRES experiments where the results fit to a two-state model, and the time-resolved area normalized emission spectroscopy (TRANES) spectra where three or two isoemissive points are detected in the AOT and BHDC RMs, respectively. In the AOT RMs, Kp values obtained at W = 10 and 20 are almost independent of the water content; the values are higher for the BHDC RMs due to the higher micropolarity of this interface.     

Hydrogen bonding and dipolar interactions between quinolines and organic solvents. Nuclear magnetic resonance and ultraviolet-visible spectroscopic studies

Solvatochromic studies on quinoline (Q), 3-cyanoquinoline (CNQ), 3-bromoquinoline (BrQ) and 8-hydroxyquinoline (OHQ) in pure solvents and alcohol-cyclohexane mixtures have been performed. The results are compared with Proton Nuclear Magnetic Resonance, 1H NMR. studies and AMI calculations. Taft and Kamlet's solvatochromic comparison method was used to disclose solvent effects in pure solvents. These studies shows that the hydrogen bond acceptor ability of the Q ring is diminished and its polarity is increased by the presence of the cyano group in CNQ and the bromo group in BrQ. In OHQ, intramolecular hydrogen bonding has been observed. This interaction is weakened by the interaction with protic solvents. The studies in binary mixtures, alcohol-cyclohexane, show solute-solvent interactions, which compete with solvent self-association in the preferential solvation phenomena. Alcohols with strong ability to self-associate have less preference toward solvation of these compounds. The association constants for solute-ethanol systems were determined by 1H NMR. The results show that the solvent hydrogen bond donor ability is the main factor involved in the interaction with these solutes at the aza aromatic site.     

Experimental simulation of possible radiation-corrosive processes in container with spent nuclear fuel after groundwater ingress

Radiation corrosion in deaerated water/carbon steel systems has been studied. Kinetics of releasing corrosion products into the water and their sorption on the surface of steel tablets is affected by various factors (redox potential, absorbed dose, temperature, irradiation duration). Concentration of corrosion products in the solution was evaluated using various chemical methods. Total concentration of Fe²⁺/Fe³⁺ ions in liquid phase was determined by UV/VIS spectrometry. Solid phase was analysed using X-ray diffraction method. Corrosion processes were studied in deaerated distilled water and synthetic granitic water. Corrosion cells consisted of glass ampoules with inserted steel tablets, completely filled with deoxygenated water. Corrosion cells were carefully enclosed so that air diffusion into system during experiment was kept at minimum. ⁶⁰Co gamma sources with various dose rates were used for irradiation. The obtained results indicated that radiation noticeably contributed to the formation of corrosion products. Kinetics of radiation corrosion was strongly dependent on the parameters under study. The obtained experimental data should be taken into consideration when predicting effects of corrosion on containers with spent nuclear fuel using mathematical models.     

Electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH) at thick-film gold electrodes

Cyclic voltammetric and electrochemical impedance spectroscopic investigations of screen-printed, thick-film gold electrodes reveal significant differences when compared with conventional polished gold disk electrodes of comparable size. The rough and porous structure of the thick-film electrode surface leads to an actual electrode area which is increased six-fold compared to polished disk electrodes. Due to the catalytic properties of these surface structures it is possible to perform the electrochemical oxidation of reduced nicotinamide adenine dinucleotide (NADH) at relatively low overpotentials, i.e. +0.145 V vs. SCE. By operating electrodes at this potential, electrode fouling processes and interference from electroactive species, e.g. acetaminophen, are minimized. An amperometric glucose sensor based on polymer matrix-entrapped glucose dehydrogenase with a working potential of +0.145 V vs. SCE was successfully incorporated into a flow injection analysis (FIA) system.     

Real structure of formamide entrapped by AOT nonaqueous reverse micelles: FT-IR and 1H NMR studies

Noninvasive techniques such as FT-IR and (1)H NMR spectroscopy have been employed to investigate the solubilization of formamide, FA, and its aqueous solution, FA-water, by sodium 1,4-bis(2-ethylhexyl)sulfosuccinate, AOT, in heptane or isooctane reverse micelles, respectively. Partially deuterated FA (FADH) was used in the FT-IR experiments and nu(OD), n(ND) were analyzed. Also, the nu(C=O) band of FA was investigated. For AOT, the changes of the SO(3)(-) group's symmetric, nu(s), and asymmetric, nu(a), bands were also studied. The results are showing that FA is interacting strongly with the Na+ counterions of the surfactant through electrostatic interactions maintaining their hydrogen bond network present in the FA bulk. Accordingly, partially deuterated FA is "frozen" inside the aggregates and it is possible to detect, by FT-IR technique, the cis and trans isomers. Curve fitting of the nu(OD) (in the FA-water mixture) band requires use of two peaks because the band is asymmetric, not because the solubilizate molecules are present in layers of different structure. The chemical shifts of the (1)H bound to N and C of FA were studied by (1)H NMR. The comparison of the chemical shift of AOT in reverse micelles with FA and the FA-water mixture in the polar core of the aggregate shows that there is a strong preferential solvation of Na+ by FA (through electrostatic interaction) and the AOT's sulfonate group by water (through hydrogen bond interaction).     

Carboxyphenyl metalloporphyrins as photosensitizers of semiconductor film electrodes. A study of the effect of different central metals

Free-base (P), Zn(II) (P(Zn)), Cu(II) (P(Cu)), Pd(II) (P(Pd)), Ni(II) (P(Ni)), and Co(II) (P(Co)) 5-(4-carboxyphenyl)-10,15,20-tris(4-methylphenyl) porphyrins were designed and synthesized to be employed as spectral senzitizers in photoelectrochemical cells. The dyes were studied adsorbed on SnO(2) nanocrystalline semiconductor and also in Langmuir-Blodgett film ITO electrodes in order to disclose the effect of molecular packing on the studied properties. Electron injection yields were obtained by fluorescence quenching analysis comparing with the dyes adsorbed on a SiO(2) nanocrystalline insulator. Back electron-transfer kinetics were measured by using laser flash photolysis. The unmetallized and metallized molecules have different singlet state energies, fluorescence quantum yields, and redox properties. The quantum yields of sensitized photocurrent generation are shown to be highly dependent on the identity of the central metal. It is shown that P(Ni) and P(Co) do not present a photoelectric effect. The other porhyrins present reproducible photocurrent, P(Pd) being the one that gives the highest quantum yield even in closely packet ITO/LB films. Photocurrent quantum yields increase as the dye ground-state oxidation potential becomes more anodic, which is in agreement with the observation, obtained by laser flash photolysis, that back electron-transfer kinetics decrease with the increase in the driving force for the recombination process. This effect could be exploited as a design element in the development of new and better sensitizers for high-efficiency solar cells involving porphyrins and related dyes.     

Porphyrin-fullerene C60 dyads with high ability to form photoinduced charge-separated state as novel sensitizers for photodynamic therapy

The photodynamic activities of a porphyrin-C60 dyad (P-C60) and its metal complex with Zn(II) (ZnP-C60) were compared with 5-(4-acetamidophenyl)-10,15,20-tris(4-methoxyphenyl)porphyrin (P), both in homogeneous medium-bearing photooxidizable substrates and in vitro on the Hep-2-human-larynx-carcinoma cell line. This study represents the first evaluation of dyads, with a high capacity to form a photoinduced charge-separated state, to act as agents to inactivate cells by photodynamic therapy (PDT). Absorption and fluorescence spectroscopic studies were performed in toluene and N,N-dimethylformamide (DMF). The emission of the porphyrin moiety in the dyads is strongly quenched by the attached fullerene C60 moiety. The singlet molecular oxygen, O2(1delta(g)), productions (phi(delta)) were determined using 9,10-dimethylanthracene (DMA). The values of phi(delta) were strongly dependent on the solvent's polarity. Comparable phi(delta) values were found for dyads and P in toluene, while O2(1delta(g)) production was significantly diminished for the dyads in DMF. In more polar solvent, the stabilization of charge-transfer state takes place, decreasing the efficiency of porphyrin triplet-state formation. Also, both dyads photosensitize the decomposition of L-tryptophan in DMF. In biological medium, no dark cytotoxicity was observed using sensitizer concentrations < or = 1 microM and 24 h of incubation. The uptake of sensitizers into Hep-2 was studied using 1 microM of sensitizer and different times of incubation. Under these conditions, a value of approximately 1.5 nmol/10(6) cells was found between 4 and 24 h of incubation. The cell survival after irradiation of the cells with visible light was dependent upon light-exposure level. A higher photocytotoxic effect was observed for P-C60, which inactivates 80% of cells after 15 min of irradiation. Moreover, both dyads keep a high photoactivity even under argon atmosphere. Thus, depending on the microenvironment where the sensitizer is localized, these compounds could produce biological photodamage through either an O2(1delta(g))-mediated photoreaction process or a free-radicals mechanism under low oxygen concentration. These results show that molecular dyads, which can form a photoinduced charge-separated state, are a promising model for phototherapeutic agents, with potential applications in cell inactivation by PDT.     

Effect of the Constrained Environment on the Interactions between the Surfactant and Different Polar Solvents Encapsulated within AOT Reverse Micelles

Herein, we report a study of the interactions between different nonaqueous polar solvents, namely, ethylene glycol (EG), propylene glycol (PG), glycerol (GY), dimethylformamide (DMF), and dimethylacetamide (DMA), and the polar heads of sodium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT) in nonaqueous AOT/n‐heptane reverse micelles. The goal of our study is to gain insights into the unique reverse‐micelle microenvironment created upon encapsulation of these polar solvents. For the first time, the study is focused on determining which regions of the AOT molecular structure are involved in the interactions with the polar solvents. We use FTIR spectroscopy—a noninvasive technique—to follow the changes in the AOT C?O band and the symmetric and asymmetric SO₃^? vibration modes upon increasing the content of polar solvents in the micelles. The results show that GY interacts through H bonds with the SO₃^? group, thereby removing the Na⁺ counterions from the interface remaining in the polar core of the micelles. PG and EG interact through H bonds, mainly with the C?O group of AOT, penetrating into the oil side of the interface. Thus, they interact weakly with the Na⁺ counterion, which seems to be close to the AOT sulfonate group. Finally, DMF and DMA, encapsulated inside the reverse micelles, interact neither with the C?O nor with the SO₃^? groups, but their weakly bulk‐associated structure is broken because of the interactions with Na⁺. We suggest that DMF and DMA can complex the Na⁺ ions through their carbonyl and nitrogen groups. Hence, our results do not only give insights into how the constrained environment affects the bulk properties of polar solvents encapsulated within reverse micelles but—more importantly—they also help us to answer the tricky question about which regions of the AOT moiety are involved in the interactions with the polar solvents. We believe that our results show a clear picture of the interactions present at the nonaqueous reverse‐micelle interface; this is important because these media are interesting nanoreactors for heterogeneous chemistry, templates for nanoparticles, and models for membranes.