一种新的基于频域有限差分方法的小周期有机太阳能电池的光电特性

由MoO₃/Ag/MoO₃ （MAM）组成的多层膜结构非常有希望替代ITO作为有机太阳能电池中的透明阳极.然而,基于MAM结构的有机太阳能电池光吸收能力较弱.为此,引入了一种小周期短节距金属光栅,利用表面等离子激元增强活性层的光吸收.借助于频域有限差分方法求解麦克斯韦方程和半导体方程,探讨了有机太阳能电池结构的光学和电学性质.分析结果表明：与平面结构相比,活性层中的光吸收大大提高;同时,当凹槽宽度为4 nm,能量转换效率提高了49%.相关结果有助于更好地开发和利用无ITO层的有机太阳能电池.     

Micromagnetic analysis of transition noise for high-density perpendicular recording

In this paper, specific issues related to high-density perpendicular magnetic recording processes, such as transition noise properties and cross-track correlation lengths, were investigated with the help of micromagnetic analysis. The effects of media parameters were taken into consideration, including intergranular exchange coupling, and exchange distribution, irregular grain shapes, magnetization saturation distribution, and anisotropy distribution. The micromagnetic simulation results showed that the effect of anisotropy distribution on transition noise is more significant than magnetization saturation distribution, and it is crucial to reduce this effect to achieve a high signal-to-noise ratio. Additionally, a new method to further estimate the partial erasure threshold was proposed to approximate the partial erasure effects, and the relation between the microtrack jitter and total track jitter was investigated.     

Separated AlxIn1−xN quantum dots grown by plasma-reactive co-sputtering

Separated Al_xIn_1−xN quantum dots (QDs) embedded in amorphous AlN films have been produced by radio-frequency co-sputtering technique on silicon (1 1 1) and quartz glass substrates. The mean size and density of Al_xIn_1−xN QDs can be conveniently monitored by deposition parameters. Transparent electron microscope, and X-ray diffraction were used to detect the structure of the Al_xIn_1−xN QDs system; field-emission scanning-electron microscope was adopted to measure the surface morphology and anticipate the size of the QDs; X-ray photoelectronic spectroscopy was used to measure the stoichiometric ratios of the QDs.     

Analytic soliton solutions of cubic‐quintic Ginzburg‐Landau equation with variable nonlinearity and spectral filtering in fiber lasers

In fiber lasers, the study of the cubic‐quintic complex Ginzburg‐Landau equations (CGLE) has attracted much attention. In this paper, four families (kink solitons, gray solitons, Y‐type solitons and combined solitons) of exact soliton solutions for the variable‐coefficient cubic‐quintic CGLE are obtained via the modified Hirota method. Appropriate parameters are chosen to investigate the properties of solitons. The influences of nonlinearity and spectral filtering effect are discussed in these obtained exact soliton solutions, respectively. Methods to amplify the amplitude and compress the width of solitons are put forward. Numerical simulation with split‐step Fourier method and fourth‐order Runge‐Kutta algorithm are carried out to validate some of the analytic results. Transformation from the variable‐coefficient cubic‐quintic CGLE to the constant coefficients one is proposed. The results obtained may have certain applications in soliton control in fiber lasers, and may have guiding value in experiments in the future.

     

化学非平衡夸克-胶子物质中等质量双轻子的产生

研究了正在进行化学平衡的富重子夸克-胶子物质的双轻子产生，发现由于产生在RHIC能量 的化学非平衡的富重子夸克-胶子物质冷却慢和高的初始温度，导致中等质量双轻子产生重 大增强.因此，中等质量双轻子的增强可以是夸克-胶子物质形成的信号.同时，这个增强能 补偿由于初始夸克化学势增加引起的双轻子抑制，因而双轻子产额的抑制不再是夸克-胶子 物质产生的信号. 关键词： 化学非平衡夸克-胶子物质 热粲夸克 双轻子     

风冷热泵冷热水机组动态过程仿真

本文给出了风冷热泵冷热水机组动态过程模型。系统的高、低压段被分成制冷剂侧、管壁、以及水或空气侧三个控制容积。针对每个控制容积建立了质量和能量平衡的微分方程。由于压缩机、热力膨胀阀阀体、以及四通换向阀具有较小的热惯性,因而采用稳态模型描述压缩过程、膨胀过程、以及内泄露过程。膨胀阀感温包中的制冷剂温度对于蒸发器出口温度的延迟用一阶惯性环节来描述。通过“预测-校正”和“自适应步长”方法实现系统仿真。仿真结果与测试数据吻合良好。     

Rectifying effect of heterojunction fabricated in freestanding thin film of polyaniline containing azobenzene side-chain

An innovative heterojunction is fabricated between two sides of a freestanding thin film of HCl-doped polyaniline (PANI) derivative containing azobenzene side-chain, which is synthesized through an N-alkyl-substituted reaction. Of the film, the side with being irradiated by UV light during preparation is represented as `A side'; the other side without being irradiated is represented as `N side'. The electrical properties of the heterojunction are measured and the rectifying effect is observed in the {current--voltage} characteristic curves with the values of rectifying ratio (γ) being 20 at ±0.06 V at T= 77K and 4 at ±0.02V at T=300 K separately.     

Current-voltage characteristics of individual conducting polymer nanotubes and nanowires

We report the current-voltage (I-V) characteristics of individual polypyrrole nanotubes and poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires in a temperature range from 300 K to 2 K. Considering the complex structures of such quasi-one-dimensional systems with an array of ordered conductive regions separated by disordered barriers, we use the extended fluctuation-induced tunneling (FIT) and thermal excitation model (Kaiser expression) to fit the temperature and electric-field dependent I–V curves. It is found that the I–V data measured at higher temper-atures or higher voltages can be well fitted by the Kaiser expression. However, the low-temperature data around the zero bias clearly deviate from those obtained from this model. The deviation (or zero-bias conductance suppression) could be possibly ascribed to the occurrence of the Coulomb-gap in the density of states near the Femi level and/or the enhancement of electron-electron interaction resulting from nanosize effects, which have been revealed in the previous studies on low-temperature electronic transport in conducting polymer films, pellets and nanostructures. In addition, similar I-V characteristics and deviation are also observed in an isolated K0.27MnO2 nanowire.     

静压下半导体微腔内激子与光子行为的研究

由于腔模与激子对压力的依赖关系不同,所以可以选择不同的压力使激子和光场处于不同的耦合状态,从而实现对耦合的调谐。利用这种办法,我们观测到了代表激子与光场强耦合作用的Rabi分裂。由于在我们现有样品结构中压力对激子本征行为的影响很小,与以前报道的温度、电场等调谐方式相比,这种调谐方法不仅可以有效地调谐半导体微腔内激子与腔模的耦合程度,而且能够保持激子的本征性质在整个调谐过程中基本不变。这有助于研究在强耦合过程中激子极化激元的本征性质。将实验结果与压力下激子与腔模耦合理论进行拟合,得出了正确的Rabi分裂值。     

Effect of mesoporous carbon containing binary conductive additives in lithium ion batteries on the electrochemical performance of the LiCoO2 composite cathodes

Binary conductive additives (BCA), formed by sonication of mesoporous carbon (MC) and acetylene black (AB), were used as conductive additives to improve the electrochemical performance of a LiCoO₂ composite cathode. The electrochemical performance of the LiCoO₂ composite cathode dispersed with BCA was investigated. The results showed that the electrochemical performance (including the discharge capacity, the discharge voltage and the total internal resistance) of a BCA loaded LiCoO₂ composite cathode was better than that of a cathode loaded with AB. The possible mechanism is that the MC in BCA can adsorb and retain electrolyte solution, which allows an intimate contact between the lithium ions and the cathode active material LiCoO₂ due to its large mesopore specific surface area. A simplified model was also proposed.