Spectral studies on the interaction of Amido black 10B with DNA in the presence of cetyltrimethylammonium bromide

The interaction of Amido black 10B (AB) with DNA in basic medium was studied in the presence of cetyltrimethylammonium bromide (CTMAB) based on the measurements of resonance light scattering (RLS), UV–vis, CD spectra, and RLS imaging. The interaction has been proved to give a ternary complex of CTMAB–DNA–AB in Britton–Robinson buffer of pH 11.55, which exhibits strong negative Cotton effect at 233.3 nm and 642.8 nm, and strong RLS signals characterized at 469 nm. Experiments showed that the enhanced RLS intensities (ΔI_RLS) against the mixture of AB and CTMAB are proportional to the concentration of fish sperm DNA (fsDNA) and calf thymus DNA (ctDNA), respectively over the range of 0.03–1.0 and 0.05–1.5 μg ml⁻¹, with the limits of determination (3σ) of 7.3 ng ml⁻¹ for fsDNA and 7.0 ng ml⁻¹ for ctDNA.     

Theoretical study of 3d‐metal mononitrides using DFT method

3d‐Metal mononitrides are studied using the density functional theory method. The lowest spin state for these dimers is obtained using the B3LYP hybrid functional with the 6‐311+G* basis set. The equilibrium geometries, vibrational frequencies, binding energies, Mulliken, and natural orbital population analysis charges, natural orbital electronic configuration, electron affinity, and ionization potential are obtained. Mulliken as well as natural orbital population analysis charges indicate that for all dimers, in cations most of the positive charge localized on the transition metal atom where in anions most of the negative charge localized on nitrogen atom. The binding energies for 3d‐metal mononitrides are higher than those for monocarbides and monoxides. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

catena‐Poly[[tetra­aqua­manganese(II)]‐μ‐4‐(carboxyl­ato­methyl­sulfanyl)­phenoxy­acetato]

The title compound, [Mn(C₁₀H₈O₅S)(H₂O)₄]_n, a one‐dimensional manganese(II) complex comprising helical chains bridged by 4‐(carboxylatomethylsulfanyl)phenoxyacetate ligands has been characterized by single‐crystal X‐ray diffraction analysis. Hydrogen‐bonding inter­actions between adjacent chains extend the complex into a three‐dimensional supra­molecular architecture.     

A novel three‐dimensional cadmium(II) coordination polymer incorporating 1,4‐bis­(1,2,4‐triazol‐1‐ylmethyl)­benzene and thio­cyanate

In the title complex, poly[cadmium(II)‐μ₂‐1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene‐di‐μ₂‐thio­cyanato], [Cd(NCS)₂(C₁₂H₁₂N₆)]_n, the Cd^II atom lies on an inversion centre in a distorted octa­hedral environment. Four N atoms from the thio­cyanate and 1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene (bbtz) ligands occupy the equatorial positions, and two S atoms from symmetry‐related thio­cyanate ligands occupy the axial positions. The benzene ring of the bbtz ligand lies about an inversion centre. Single thio­cyanate bridges link the Cd^II atoms into two‐dimensional sheets containing novel 16‐membered [Cd₄(μ‐NCS‐N:S)₄] rings. The bbtz ligands further link these two‐dimensional sheets into an unprecedented covalent three‐dimensional network for the cadmium–thio­cyanate system.     

A study of laser ablation and slurry nebulisation sample introduction for the analysis of geochemical materials by inductively coupled plasma spectrometry

Summary The performances of two alternative sample introduction methods for use with Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) have been evaluated for the analysis of the same sample material. The laser ablation sample introduction system is based on a Nd:YAG laser to which an x-y-z translational sampling head had been added. A study has been made of a number of parameters which affect the performance of the system to find the optimum operating conditions. The slurry introduction system involved aspirating the slurries into the plasma using a de Galan nebuliser and a Scott-type spray chamber arrangement. A study has been made of the parameters which control the production of stable homogeneous slurries. Initial particle size measurements have been carried out on the slurried samples to show how this affects this method of sample introduction. Results are presented for the analysis of a South African reference material rock sample (SARM 5) by ICP-OES with both laser ablation and slurry nebulisation sample introduction and some preliminary results for the analysis by ICP-MS with laser ablation introduction. Semi-quantitative results are obtained for laser ablation ICP-OES as only one matrix matched standard is used. However, the agreement between the results obtained for slurry nebulisation and the certificate value is poor. It is suggested by comparison with previous studies that this may be due to particle size effects. Encouraging results were obtained for the determination of trace elements by laser ablation ICP-MS.     

聚对苯撑对苯二甲酰胺液晶的相态转变

本工作以H(?)ppler流变粘度计、退偏振光法及小角激光光散射法研究了聚对苯撑对苯二甲酰胺的浓硫酸溶液在不同浓度和温度下的粘性行为、光学性质和区域结构的变化,发现聚对苯撑对苯二甲酰胺的各向异性溶液在不同温度下呈现向列型液晶和胆甾型液晶特征,说明芳香聚酰胺的液晶体系与小分子液晶相类似,也具有多种中介相的转变现象。这里的中介相转变是由向列型转变为胆甾型,但不是直接的同时是一个单变性的相转变过程。     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Supramolecular isomerism in the hydrogen-bonded network of (5<Emphasis Type="Italic">R</Emphasis>,10<Emphasis Type="Italic">R</Emphasis>)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-<Emphasis Type="Italic">cde</Emphasis>]chromene monohydrate

A new compound (5R, 10R)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-cde]chromene monohydrate was obtained from 3,4-dihydroxybenzaldehyde in aerobic basic aqueous ethanol solution in the presence of manganese chloride and triethylamine and crystallized in orthorhombic P2₁2₁2₁ space group (denoted as 1). When 1 was recrystallized from aqueous methanol, it was transformed to another crystal (2) with the same composition but in P2₁/n space group. The drastic difference in the extensive hydrogen bond network makes 1 a 3D and 2 a 2D infinite supramolecular structure, respectively.     

TiO2-CdS-MCM-41复合纳米材料的合成和表征

利用γ-巯丙基三甲氧基硅烷及表面预吸附水解技术在MCM-41介孔分子筛孔道内部以化学键合的形式依次引入了CdS和TiO2纳米粒子.紫外-可见吸收光谱结果表明,借助于巯基的络合能力,MCM-41能有效地从反胶束中萃取CdS纳米粒子.利用小角XRD谱图成功地跟踪观察到了MCM-41介孔分子筛随纳米粒子的引入而产生的孔径变化.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.