Chemically enhanced alpha-energy spectroscopy in liquids

Summary The determination of transuranic (TRU) content in nuclear wastes, reactor materials, process solutions, and various other matrices is required in support of material assessment, environmental restoration, and waste processing activities. We have found that direct measurement of TRU is possible using surface passivated ion implanted planar silicon diode detectors. The performance and durability of modern silicon diodes enables direct detection of alpha-particles, with retention of some spectral information, through small air gaps or under direct contact with liquid or solid samples. We will present results on the performance of silicon diode detectors for the determination of TRU in liquids.     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

FLUORESCENCE LIFETIME OF ACRIDINE ORANGE IN SODIUM DODECYL SULFATE PREMICELLAR SOLUTIONS

Abstract— The absorption and fluorescence spectra, and the fluorescence lifetime of acridine orange (AO) were measured in a wide range of the sodium dodecyl sulfate (SDS) concentration below and above the critical micelle concentration (cmc). The fluorescence consisted of two components with different lifetimes; short (<3 ns) and long (>3 ns). The short and long lifetime components are attributed to the AO monomer and dimer associated with detergent, respectively. The lifetime of the dimer increased with increasing the SDS concentration just below the cmc. It decreased suddenly to a constant value just above the cmc. The lifetime of the monomer showed only a slight increase in the concentration range of SDS employed.     

Self-oscillation of polymer chains induced by the Belousov-Zhabotinsky reaction under acid-free conditions

A novel self-oscillating polymer was prepared by utilizing the Belousov-Zhabotinsky (BZ) reaction. In this study, a sulfonic acid group was newly introduced as a pH-control site into the copolymer of N-isopropylacrylamide, and the ruthenium complex was introduced as a catalyst site. By introducing the pH-control site, we succeed in causing the soluble-insoluble self-oscillation of the polymer solution under acid-free conditions in which only two BZ substrates, malonic acid and sodium bromate, were present as added agents. The self-oscillating behavior was remarkably influenced by the temperature and polymer concentration, which reflects the intermolecular aggregative capacity of the polymer chains in the reduced state to change the lower critical solution temperature. This achievement of self-oscillation of polymer chains under acid-free conditions may lead to their practical use as novel biomimetic materials under biological conditions.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

all-Z-Tetrabenzo

Crystal structures of the silver complexes derived from tetrabenzo[16]annulene with AgOTf and AgClO(4) are different, although these two complexes show similar (1)H NMR spectra reflecting a similar clathrate structure in solution. The silver complex of pentabenzo[20]annulene with AgClO(4) adopts a clathrate structure both in the solid state and in solution.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

An iron reservoir model based on ferrichrome: iron(III)-binding and metal(III)-exchange properties of tripodal monotopic and ditopic hydroxamate ligands with an L-alanyl-L-alanyl-N-hydroxy-beta-alanyl sequence

To gain knowledge about biological iron mobilization, tripodal monotopic and ditopic hydroxamate ligands (1 and 2) are prepared, and their iron-chelating properties are investigated. Ligands 1 and 2 contain three Ala-Ala-beta-(HO)Ala units and three [Ala-Ala-beta-(HO)Ala](2) units connected with tris(alanylaminoethyl)amine, respectively, and form six-coordinate octahedral complexes with iron(III) in aqueous solution. Ligand 1 and 1 equiv of iron give Fe-1, and ligand 2 and 1 or 2 equiv of iron produce Fe(1)-2, or Fe(2)-2. These complexes exhibit absorptions at lambda(max) 425 nm of epsilon 2800-3000/Fe, characteristic of tris(hydroxamato)iron(III) complexes, and preferentially assume the Delta-cis configuration. Loading of Fe(III) on 1, 2, and M(III)-loaded ligands (M-1 and M(1)-2, M = Al, Ga, In) with ammonium ferric oxalate at pH 5.4 is performed, and the second-order rate constants of loading with respect to Fe(III) and the ligand or M(III)-loaded ligands are determined. The rates of loading of Fe(III) on M-1 increase in the order Al-1 < Ga-1 < In-1, and those on M(1)-2 in the order Al(1)-2 < Ga(1)-2 < Fe(1)-2 < In(1)-2, indicating that the dissociation tendency of M(III) ions from the hydroxamate ligand is an important factor. The iron complexes formed with 2 are subjected to an iron removal reaction with excess EDTA in aqueous pH 5.4 solution at 25.0 degrees C, and the collected data are analyzed by curve-fitting using appropriate first-order kinetic equations, providing the rate constants for the upper site and the lower site of 2. Similar analysis for FeM-2 affords removal rate constants for Fe(up)-2, M(up)-2, and Fe(low)-2, and the iron residence probability at each site. The protonation constants of the hydroxamate groups for 1 and 2 (pK(1,) pK(2), pK(3), and pK(1,) pK(2)., pK(6)) are determined, and the proton-independent stability constants for Fe-1, the upper site of Fe(2)-2, and the lower site of Fe(1)-2 are 10(28), 10(29), and 10(28.5), respectively.     

Polyhydrazides. III. N-methylated polyhydrazides by ring-opening of poly-p-phenylene-1,3,4-oxadiazole

A new ring-opening reaction of 1,3,4-oxadiazole by methylating reagents was developed in fuming sulfuric acid or polyphosphoric acid and then, by applying this reaction to poly-p-phenylene-1,3,4-oxadiazole, a high molecular weight poly-N-methylterephthalylhydrazide was obtained. Various methylating reagents were investigated as ring-opening reagents. The degrees of ring-opening in polymers were estimated and related to the properties of the polymers.