Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

Preparation of 103Pd seeds Part II. “Molecular Plating” of 103Pd onto copper rod

A method for ¹⁰³Pd molecular plating onto the surface of the copper rod is reported. The optimal composition of the plating bath was: palladium chloride 2 g/l, ammonium hydroxide (28%) 150 ml/l, sodium hypophosphite 12 g/l, and ammonium chloride 37 g/l. The whole procedure of ¹⁰³Pd molecular plating will last 50 minutes at 40 °C. This article provides valuable experience for the preparation of ¹⁰³Pd seeds.     

用于气/固吸附的微分吸附热测定装置

本文介绍了一套吸附热测定装置, 它是对法国SETARAM高温量热计进行了适当变动后而建成的。用它可以测定在室温～800 K范围内气/固吸附的微分吸附热。在实验过程中, 吸附量是用光标微压计进行测量。用电标定法代替标准物质法来测定该装置的热定量因子, 这更适合于在恒温条件下的吸附热测定。用这套装置测定了吡啶在HY分子筛上于不同温度下的吸附热。     

Terephthalamide derivatives as mimetics of helical peptides: disruption of the Bcl-x(L)/Bak interaction

A series of Bcl-x(L)/Bak antagonists, based on a terephthalamide scaffold, was designed to mimic the alpha-helical region of the Bak peptide. These molecules showed favorable in vitro activities in disrupting the Bcl-x(L)/Bak BH3 domain complex (terephthalamides 9 and 26, K(i) = 0.78 +/- 0.07 and 1.85 +/- 0.32 microM, respectively). Extensive structure-affinity studies demonstrated a correlation between the ability of terephthalamide derivatives to disrupt Bcl-x(L)/Bak complex formation and the size of variable side chains on these molecules. Treatment of human HEK293 cells with the terephthalamide derivative 26 resulted in disruption of the Bcl-x(L)/Bax interaction in whole cells with an IC(50) of 35.0 microM. Computational docking simulations and NMR experiments suggested that the binding cleft for the BH3 domain of the Bak peptide on the surface of Bcl-x(L) is the target area for these synthetic inhibitors.     

Facile solvent-free synthesis of pure-phased AlN nanowhiskers at a low temperature

Pure hexagonal aluminum nitride (AlN) nanowhiskers have been successfully synthesized by directly reacting AlCl₃ with NaN₃ in non-solvent system at the low temperature of 450 °C for 24 h. The obtained products are characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and selected area electron diffraction, which show that the obtained products are hexagonal phase AlN nanowhiskers with width from 10 to 80 nm and length up to several micrometers. The influencing factors of the formation of AlN nanowhiskers were discussed and a possible growth mechanism for AlN nanowhiskers was proposed. Additionally, the study on the corresponding optical properties and catalytic properties is also carried out.     

LyP-1 peptide-functionalized gold nanoprisms for SERRS imaging and tumor growth suppressing by PTT induced-hyperthermia

The gold nanoprisms (GNPs) have exhibited special plasmonic properties for biomedical applications because of their unique shapes and dimensions. Based on their optical performance, the NIR dye IR780 not only enabled the GNPs-based nanosystem as SERRS nanoparticles for Raman-encoded molecular imaging, but also enhanced the plasmonic photothermal property by laser irradiation. Meanwhile, the GNPs/IR780-Lyp-1 by introduction of tumor-homing peptide segment LyP-1, which presents high affinity to p32 protein, demonstrated the increased enrichment in tumor region and enhanced photothermal therapy efficacy.     

A modified internal lock-mass method for calibration of the product ions derived from sustained off-resonance irradiation collision-induced dissociation using a Fourier transform mass spectrometer

A modified internal lock-mass calibration method is introduced for improving the mass measurement accuracy of the product ion spectra derived from sustained off-resonance irradiation collision-induced dissociation (SORI-CID) Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. This method involves an initial external calibration of the Fourier transform mass spectrometer to obtain the initial A- and B-terms for the equation (f(i) = A/(m/z)(i) + B). The A-term is adjusted by using an empirical relationship between the up-shift of the A-term and the pulse-gas duration, whereas the B-term is adjusted by using the mass of the unfragmented precursor ion from the SORI-CID mass spectrum of the unknown sample as internal lock-mass. These adjusted A- and B-terms are then used to provide exact mass SORI-CID calibration for the unknown sample. The modified internal lock-mass method achieved average mass measurement accuracy of approximately 3 ppm which is significantly better than that of the conventional internal lock-mass calibration ( approximately 9 ppm) and is approaching that of the internal calibration ( approximately 2 ppm) and requires no addition of internal calibrant or instrumental modifications.     

Chemical activation of carbon nanofibers and nanotubes

Method of thermodynamic simulation was used to calculate the equilibrium parameters of reactions of graphite with anhydrous LiOH, NaOH, and KOH and with the alkalis in the presence of water vapor. The change in the specific surface area and mass loss were used to analyze the interaction of carbon nanofibers and multilayer carbon nanotubes produced by catalytic pyrolysis of CH₄ with the alkalis.     

DNA cleavage reaction of antitumour antibiotic, kapurimycin A3, with deoxytetranucleotide d(CGCG)2

Kapurimycin A3 (kap A3, 1 ), an antitumour antibiotic, alkylates N7 of guanine₂ (G₂) and G₄ of d(C₁G₂C₃G₄)₂ to produce their covalent adducts 2 (64 %) and 3 (7.0 %), respectively. Heating at 90 °C for 5 min degraded both adducts to kap A3 - G adduct (5) with the concurrent release of their respective abasic-site containing oligomers 4 and 6.     

Ruthenium-catalyzed reductive cyclization of nitroarenes with trialkylamines leading to quinolines

Nitroarenes react with trialkylamines in the presence of a catalytic amount of a ruthenium catalyst together with tin(II) chloride dihydrate at 180 °C in an aqueous medium (toluene–H₂O) to afford the corresponding quinolines in moderate to good yields. The catalytic pathway seems to be proceeded via a sequence involving initial reduction of nitroarenes to anilines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heterocyclization.