Biological evaluation of novel selenazole‐based compounds as potential thioredoxin reductase inhibitors

Recently, thioredoxin reductase as a target for treatment of tumors has attracted the attention of scientists. 1,2‐[Bis(1,2‐benzisoselenazolone‐3(2 H)‐ketone)]ethane (ethaselen, BBSKE, PCT: CN02/00412), designed and synthesized previously, is an effective thioredoxin reductase inhibitor; presently it is in phase II clinical trials, targeting gastric cancer, lung cancer and colon cancer. To seek more novel and effective anticancer drugs, we have developed many selenazole‐based compounds. Evaluation of the thioredoxin reductase inhibitory effect and investigation of the mechanism of anticancer drugs require abundant thioredoxin reductase, but since commercial thioredoxin reductase is expensive its use is often limited. Therefore, the preparation of thioredoxin reductase is necessary. Base on the above investigation, in this work we have prepared thioredoxin reductase and evaluated selenazole‐based compounds, and found that 44 compounds have high inhibitory effect on thioredoxin reductase with IC₅₀ < 10 µ m , of which 16 compounds have IC₅₀ values below 1 µ m . This is helpful in investigating and elucidating the mechanism of this kind of compound. Copyright © 2012 John Wiley & Sons, Ltd.     

Cyclopalladated ferrocenylimine as an efficient catalyst for the syntheses of diarylmethane derivatives

The cyclopalladated ferrocenylimine adducts Ia , Ib , Ic were evaluated in the Suzuki cross‐coupling reaction of benzyl halides with arylboronic acids. The tricyclohexylphosphine adduct Ia exhibited highly catalytic activity for the coupling of aryl and heteroaryl boronic acids containing various functional groups with benzylic bromides and chlorides (up to 99% yield), furnishing diarylmethane derivatives with low catalyst loading (1 mol%). It is worth noting that catalyst Ia can be reused eight times without losing its catalytic activity. Copyright © 2012 John Wiley & Sons, Ltd.     

Dried blood spot on‐card derivatization: an alternative form of sample handling to overcome the instability of thiorphan in biological matrix

Thiorphan, the active metabolite of racecadotril, can undergo oxidation in biological matrices such as blood and plasma. In bioanalysis, a general approach for the stabilization of such a molecule is to derivatize the thiol group to a more stable thioether, often requiring complex handling procedures at the clinical site. In this research, the concept of dried blood spot (DBS) on‐card derivatization was evaluated to stabilize thiorphan. DBS cards were in‐house pre‐treated with 2‐bromo‐3′‐methoxyacetophenone and left to dry prior to blood spotting. Thiorphan was shown to be effectively derivatized to thiorphan–methoxyacetophenone once applied on the in‐house pre‐treated cards. Thiorphan–methoxyacetophenone was extracted by soaking a 6 mm DBS punch in methanol containing the internal standard (thiorphan–methoxyacetophenone‐D₅). Chromatographic separation was achieved on a Waters XBridge C₁₈ column with a gradient elution of 5 m m NH₄HCO₃ and methanol in 2.5 min and detection by ESI(+)/MS/MS. A linear (weighted 1/x²) relationship was obtained over a concentration range of 5.00–600.00 ng/mL. The assay met regulatory guidelines acceptance criteria for sensitivity, selectivity, precision and accuracy, matrix effect, recovery, dilution integrity and multiple stability evaluations. The DBS on‐card derivatization has shown to be an easy and reliable alternative form of sample collection for the quantification of thiorphan. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of self‐assembled sphingolipid conjugates and their morphology effect on anticancer therapeutic potency

The shape of self‐assembling polymer–drug conjugates, influencing the cellular uptake, is one of the important factors to be considered for effective drug delivery. In this study, we described synthesis of polymeric drug conjugates of different morphologies with phytosphingosine (PHS) as a hydrophobic model drug and poly(amino acid) as a hydrophilic host polymer. By varying the amount of PHS grafted to poly(amino acid), PHS–poly(amino acid) conjugates exhibited morphological transition from spherical to worm‐like micellar aggregates in the aqueous media. We investigated the physicochemical properties of self‐assembled structures in terms of hydrodynamic size, surface charge, and critical aggregation concentration. The anticancer therapeutic potency of these self‐assembled structures was also discussed in terms of cellular uptake and cytotoxicity of prodrug micelles as a function of dose and time by in vitro cell study. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Individual strings of conducting carbon cones and discs in a polymer matrix: Electric field‐induced alignment and their use as a strain sensor

We demonstrate micromechanical strain sensors with integrated readout based on carbon nanocones and discs (CNCs) which are aligned into a string‐like formation using an alternating electric field and studied by AC impedance spectroscopy and electromechanical methods. The CNC particles are first dispersed into a polymer matrix with a particle fraction of 0.1 vol %. This value is well below the percolation threshold (～ 2 vol %), which suppresses particle aggregation and facilitates transparency allowing the use of an UV‐curable polymer. Alignment was carried out with a 1 kHz, 4 kV/cm electric field and is a consequence of dielectrophoretic effect. It develops in minutes and makes the initially insulating, nonaligned material conductive. This is followed by UV curing of the polymer matrix, which renders a solid state device. The stretching of the aligned strings in the cured polymer leads to a reversible piezoresistive effect, and a gauge factor of about 50 is observed. This is in a sharp contrast to CNC films with particle fraction above percolation threshold (13 vol %), which are conductive but not sensitive to stretching. The strings are Ohmic in nature and moreover show higher DC conductivity (22–500 S/m) compared to identically prepared carbon black strings (1–22 S/m). © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Effect of scale and surface chemistry on the mechanical properties of carbon nanotubes‐based composites

In this article, Multi‐Walled Carbon Nanotubes (MWCNTs) of varying diameters, both untreated and polycarboxylated, were dispersed at constant weight percentage in an epoxy matrix, and resulting fracture toughnesses (K_Ic) were measured in each case. We show that changing the MWCNT diameter has two effects on the composite fracture toughness: (i) a small MWCNT diameter enables larger interfacial surface for adhesion maximization, which increases toughness; (ii) at the same time, it limits the available pull‐out energy and reduces the MWCNT ability to homogeneously disperse in the matrix due to this same large active surface: this decreases toughness. Most commercially available MWCNTs have a length range of several μm, thus an optimal diameter exists which depends on MWCNT wall thickness and surface treatment. Such optimal diameter maximizes pull‐out energy and thus composite fracture toughness. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

White light electroluminescence from graphene‐enhanced single polymer comprising two color emitters of equal molar ratios

White polymeric light‐emitting diode (WPLED) based on a single polymer, poly(3‐hexylthiophene‐alt‐9,9‐dioctylfluorene) (PTAF), has been successfully demonstrated. This conjugated alternating copolymer, PTAF, comprises 50 mol % of 3‐hexylthiophene which is an orange‐red color chromophore and 50 mol % 9,9‐dioctylfluorene which is a bluish‐green color chromophore. It was synthesized by Suzuki cross‐coupling reaction and has a molecular weight of 15,021 and polydispersity of 1.36. Nanocomposite consisting PTAF and graphene nanosheets enhances the optoelectronic properties and the device fabricated with a configuration of ITO/PEDOT:PSS/(PTAF + 1% graphene)/Ca/Al shows two‐color white electroluminescence with CIE 1931 coordinates of (0.28, 0.34). The white luminescence from a single polymer affords the WPLED device a simple structure and low fabrication cost. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Coordination Chemistry of Gold Catalysts in Solution: A Detailed NMR Study

Coordination chemistry of gold catalysts bearing eight different ligands [L=PPh₃, JohnPhos (L2), Xphos (L3), DTBP, IMes, IPr, dppf, S‐tolBINAP (L8)] has been studied by NMR spectroscopy in solution at room temperature. Cationic or neutral mononuclear complexes LAuX (L=L2, L3, IMes, IPr; X=charged or neutral ligand) underwent simple ligand exchange without giving any higher coordinate complexes. For L2AuX the following ligand strength series was determined: MeOH?hex‐3‐yne <MeCN≈OTf^??Me₂S<2,6‐lutidine<4‐picoline<CF₃CO₂^?≈DMAP<TMTU<PPh₃<OH^?≈Cl^?. Some heteroligand complexes DTBPAuX exist in solution in equilibrium with the corresponding symmetrical species. Binuclear complexes dppf(AuOTf)₂ and S‐tolBINAP(AuOTf)₂ showed different behavior in exchange reactions with ligands depending on the ligand strength. Thus, PPh₃ causes abstraction of one gold atom to give mononuclear complexes LLAuPPh₃⁺ and (Ph₃P)_nAu⁺, but other N and S ligands give ordinary dicationic species LL(AuNu)₂²⁺. In reactions with different bases, LAu⁺ provided new oxonium ions whose chemistry was also studied: (DTBPAu)₃O⁺, (L2Au)₂OH⁺, (L2Au)₃O⁺, (L3Au)₂OH⁺, and (IMesAu)₂OH⁺. Ultimately, formation of gold hydroxide LAuOH (L=L2, L3, IMes) was studied. Ligand‐ or base‐assisted interconversions between (L2Au)₂OH⁺, (L2Au)₃O⁺, and L2AuOH are described. Reactions of dppf(AuOTf)₂ and S‐tolBINAP(AuOTf)₂ with bases provided more interesting oxonium ions, whose molecular composition was found to be [dppf(Au)₂]₃O₂²⁺, L8(Au)₂OH⁺, and [L8(Au)₂]₃O₂²⁺, but their exact structure was not established. Several reactions between different oxonium species were conducted to observe mixed heteroligand oxonium species. Reaction of L2AuNCMe⁺ with S^2? was studied; several new complexes with sulfide are described. For many reversible reactions the corresponding equilibrium constants were determined.