REDUCTION OF NO BY CO OVER NiWO4, NiO, AND WO3 CATALYSTS

We present a comparative study of NiWO₄, NiO, and WO₃ catalysts for simultaneous conversion of NO and CO. Samples were synthesized by reacting ammonium metatungstate and/or nickel nitrate at high temperature (773 K to 903 K) under an oxygen stream. Catalysts were characterized by X-ray diffraction, surface area measurements, energy dispersive spectroscopy and scanning electron microscopy. The catalytic reduction of NO by CO took place in the temperature range (523 to 973) K under highly reductive conditions (NO:CO= 1:5) over NiWO₄NiO, and WO₃, respectively. The 100 % NO conversion at GHSV of 11460 h^-1 was achieved at 773 K over NiWO₄ and at 848 K over NiO. The WO₃ was deactivated at 898 K. However, in the range (523 to 723) K NiO was more active than NiWO₄ and WO₃ catalysts.     

Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds

A heterogeneous chemiluminescent (CL) flow immunoassay for DDT was optimized comparing different types of immunoaffinity supports: beads, nylon coils and membranes (membranes HyBondN+). In order to characterize solid immunoaffinity supports two basic immunoassay formats were performed, using (1) enzyme-labeled secondary and (2) enzyme-labeled specific monoclonal antibodies (MAbs). In both formats, hapten DDT5 conjugated to ovalbumin immobilized on solid supports according to the appropriate immobilization procedure, enzyme label (horseradish peroxidase, HRP) and luminescent detection (luminol/H₂O₂/p-iodophenol) were used. The lowest limit of detection (LOD), 1 nM p,p-DDT, was obtained with a membrane-based flow immunoassay with HRP-labeled specific antibody. Beads and packed tubing were discarded as appropriate supports because of the difficulties encountered for reproducible packing and the occurrence of light scatterring (beads), which seriously compromised the performance and reproducibility of the flow immunoassay.     

Conformational dynamics of a bispyridinium cyclophane

A complete study of the conformational behavior of 4,8-diaza-3(1,4),9(4,1)-dipyridina-1,6(1,4)-dibenzenacyclodecaphan-3(1),9(1)-bis(ilium) bishexafluorophosphate is described. This study allows us to conclude that the process observed by which the different chemical shifts of the pyridinium protons show coalescence at a high-temperature 1H NMR is the rotation around the C-N bond, whereas the conformational equilibrium between the four conformers is produced at low temperature.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Polarographic determination of pilocarpine using the catalysed pre-wave of nickel(II)

On the basis of a detailed study of the pilocarpine-induced nickel(II) pre-wave using various polarographic techniques, an electrode process mechanism is proposed in which the formation of a catalytic complex between aquo-nickel(II) and veronalate-nickel(II) on the one hand and unprotonated pilocarpine adsorbed on the electrode surface on the other is followed by the reduction of nickel(II) in the complex and the release of the catalytic ligand. The pre-peak recorded by differential-pulse polarography in the system 1 × 10^?3 M Ni(II)-1 × 10^?2 M sodium veronal, nitric acid (pH 8.5) (with ionic strength maintained at 0.2 with sodium nitrate) can be used for quantitative determination of pilocarpine at concentrations in the range 2.5 × 10^?7-8 × 10^?6 M.     

Optimization of culture medium and conditions for penicillin acylase production by Streptomyces lavendulae ATCC 13664

The culture medium for Streptomyces lavendulae ATCC 13664 was optimized on a shake-flask scale by using a statistical factorial design for enhanced production of penicillin acylase. This extracellular enzyme recently has been reported to be a penicillin K acylase, presenting also high hydrolytic activity against penicillin V and other natural aliphatic penicillins such as penicillin K, penicillin F, and penicillin dihydroF. The factorial design indicated that the main factors that positively affect penicillin acylase production by S. lavendulae were the concentration of yeast extract and the presence of oligoelements in the fermentation medium, whereas the presence of olive oil in the medium had no effect on enzyme production. An initial concentration of 2.5% (w/v) yeast extract and 3 microg/mL of CuSO4 x 5H2O was found to be best for acylase production. In such optimized culture medium, fermentation of the microorganism yielded 289 IU/L of enzyme in 72 h when employing a volume medium/volume flask ratio of 0.4 and a 300-rpm shaking speed. The presence of copper, alone and in combination with other metals, stimulated biomass as well as penicillin acylase production. The time course of penicillin acylase production was also studied in the optimized medium and conditions. Enzyme production showed catabolite repression by different carbon sources such as glucose, lactose, citrate, glycerol, and glycine.     

Fluorescent behavior of B-phycoerythrin in microemulsions of aerosol OT/water/isooctane

Taking advantage of its unusual fluorescent properties, the incorporation of B-phycoerythrin (B-PE) in aerosol OT (AOT, sodium bis-(2-ethylhexyl) sulphosuccinate)/water/isooctane microemulsions was investigated by following their steady-state and time-resolved fluorescence as a function of the water-to-surfactant molar ratio, w(0). The fluorescent intensity at 575 nm increased continuously with increasing water content, saturating at a w(0) around 35 and staying practically constant at w(0)> or =40. The steady-state anisotropy showed an initial increase with increasing water content until w(0)=23 and then decreased strongly, staying practically constant when w(0)> or =40. The values of the fluorescent parameters, anisotropy and fluorescent intensity, were unchanged when the water content of the system increased in the range between w(0)=40 to 50. This implies the effective incorporation of B-PE in the microemulsion droplets with w(0)> or =40, as well as the equilibrium of the dispersion at these water/surfactant ratios, since higher water content does not affect the main surrounding microenvironment of the protein. The overall incorporation in the microemulsion droplets caused minor spectroscopic changes with respect to biliprotein in aqueous solution of 20 mM sodium phosphate buffer, pH 7.0, such as a blue absorption shift of 3 nm and an emission shift of 1.5 nm, as well as a slight increase in excitation anisotropy spectrum mainly caused by a decrease in protein mobility. Therefore, there are no important interactions between the chromophores and the AOT sulfonate head groups. Emission intensity decays followed complex kinetics in both aqueous and dispersion media. The stability with time and temperature of the biliprotein in the microemulsion was higher than in the aqueous solution. All the results can be explained in terms of B-PE inclusion in the water droplets of AOT microemulsions where the protein has similar configuration and conformation to that in aqueous solution but with the chromophores more protected.     

Sample preparation improvement in polycyclic aromatic hydrocarbons determination in olive oils by gel permeation chromatography and liquid chromatography with fluorescence detection

The determination of 15 polycyclic aromatic hydrocarbons (PAHs) in olive oil samples has been improved in order to obtain a fast methodology with a low limit of detection through the combination of liquid-liquid extraction with acetonitrile and preparative gel permeation chromatography (GPC) prior to the injection of purified extracts into a C18 column. Acetonitrile-water was used as the mobile phase with a gradient from 50 to 95%, w/w, acetonitrile in 30 min. The oven temperature was maintained at 15 degrees C, and fluorometric detection was made at a fixed excitation wavelength of 264 nm and variable, optimal emission wavelength for each analyte ranging from 352 nm for 11-H-benzo(b)fluorene to 500 nm for indeno(1,2,3-cd)pyrene. Recovery for all the compounds studied varied from 75 to 111%, and limit of detection values from 0.05 ng/g for benzo(k)fluoranthene to 0.48 ng/g for indeno(1,2,3-cd)pyrene, corresponding to 0.09 ng/g benzo(a)pyrene. Results were compared with those obtained by liquid-liquid extraction followed by a cleanup on silica and a direct GPC treatment of oil samples diluted in dichloromethane, 2 other methodologies that are appropriate for quantifying PAHs in olive oils. However, the proposed method improves the determination limits, reduces the time of analysis, and provides a highly stable baseline for sample chromatograms.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

13C-NMR relaxation studies of alkali metal cryptate complexes

The ¹³C spin-lattice relaxation times (T₁'s) of cryptands [2.1.1], [2.2.1] and [2.2.2] as well as those of the corresponding cryptate complexes with Li⁺, Na⁺, and K⁺ in CDCl₃ and CH₃OH:D₂O (90:10) were measured and the results are interpreted in terms of molecular compression and desolvation effects.