Microstructure analysis of a bronze–steel electron beam weld

An electron beam welded joint of bronze and steel has been investigated by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The phases and the resulting microstructure in the different zones of the joint have been characterised in detail and compared to hardness. The fine grained microstructure of the weld zone is partly dominated by the directed solidification of the melt. It mainly consists of the α-copper solid solution phase, the intermetallic δ phase Cu₃₁>Sn₈> as well as the bainitic and the martensitic steel phase. This mixture results in a considerably increase in hardness compared to base materials. The heat affected zone of bronze shows a refinement of the used dendritic cast material in a very small area. In the heat affected zone of the mild steel the change of microstructure depends on the distance from the weld zone due to the influence of thermal energy impact and heat dissipation. A maximum of hardness is reached nearby the weld due to the formation of bainite and martensite. The resulting hardness profile is asymmetrical.     

Über basische Aluminiumsalze und ihre Lösungen. X. NMR-Untersuchungen am tridekameren Al-oxo-hydroxo-Kation

Basic Aluminum Salts and their Solutions. X. NMR-Investigations on the Tridecameric Al-Oxo-Hydroxo Cation Using solid-state high resolution ²⁷Al-NMR it is shown that in the basic aluminum chloride with a degree of alkalinity r = OH/Al = 2.5 cations of the [Al₁₃O₄(OH)₂₅(H₂O)₁₁]⁶⁺ type exist. The ¹H-NMR detects besides the constitutional water still an amount of mobile, enclosed H₂O molecules which can be removed by thermal treatment at 104°C. The ²⁷Al spectrum of the aqueous solutions of the chloride shows only one peak at 62.5 ppm which is characteristic for the tridecameric cation. Adding HCl to the solution causes a decomposition to low-molecular species (peak at 0 ppm). Adding NaOH to the aqueous solution of the chloride effects a rearrangement of the tridecameric cations to higher molecular particles which are no more accessible by ²⁷Al-NMR.     

Double-chip protein arrays: force-based multiplex sandwich immunoassays with increased specificity

Protein assays provide direct access to biologically and pharmacologically relevant information. To obtain a maximum of information from the very smallest amounts of complex biological samples, highly multiplexed protein assays are needed. However, at present, cross-reactions of binding reagents restrict the use of such assays to selected cases and severely limit the potential for up-scaling the technology. Here we describe a double-chip format, which can effectively overcome this specificity problem for sandwich immunoassays. This format consists of a capture array and a reference array with fluorescent labeled detection antibodies coupled to the reference array via DNA duplexes. This format allows for the local application of the labeled detection antibodies onto their corresponding specific spots on the capture array. Here we show that this double-chip format allows for the use of cross-reactive antibodies without generating false positive signals, and an assay for the parallel detection of seven different cytokines was set up. Even without further optimization, the dynamic range and the limit of detection for interleukin 8 were found to be comparable to those obtained with other types of multiplexed sandwich immunoassays.     

Formation and dissociation kinetics of Cu(II) and Ni(II) complexes with N2S2-macrocycles

The kinetics of the formation and dissociation of the Cu(2+) and Ni(2+) complexes with a series of N(2)S(2) macrocycles, in which the ring size and the geometry of the arrangement of the donor groups have been varied, have been measured at 25 [degree]C and I= 0.5 (KNO(3)). Both the deprotonated (L) and the monoprotonated (LH(+)) form of the ligands are reactive species in the formation step. In their deprotonated form, first bond formation, in some cases supported by an ICB effect, is rate determining, independently of the ring size. In the monoprotonated form, we find slower rates, due to the charge repulsion and/or conformation changes induced by hydrogen bonds. In contrast the mechanism of the dissociation is very dependent on the ring size. The complexes with the smaller rings react as flexible open-chain ligands directly with H(+). In contrast, the complexes with the larger rings react in a similar way as rigid ligands: first the metal amine bond slowly dissociates so that the free electron pair of the amine can take the "out conformation" and then it is protonated. The 14-membered macrocycle L(3) forms complexes in which the metal ions are ideally coordinated so that their dissociation becomes extremely slow.     

Hetero-cope-umlagerungen -II. Einfache und flexible synthesen für 2-substituierte indole

The reaction of N-phenylhydroxylamine derivatives with electron withdrawing allenes gives o-alkylated anilines, which can further react to form 1,2-disubstituted indoles. 2-Substituted indoles are directly obtainable from reaction with N-phenyl-nitrones.     

Total synthesis of (+)-astrophylline

The first total synthesis of (+)-astrophylline (2) has been achieved, starting from readily available enantiomerically pure (+)-(1R,4S)-4-hydroxycyclopent-2-enyl acetate (11). A novel ruthenium-catalyzed ring-closing ring-opening ring-closing metathesis of carbocyclic olefins of general type 5 was the key step, providing the stereochemically well-defined bis-piperidyl skeleton of the target molecule. A [2,3]-Wittig-Still rearrangement of 9 was also employed as the critical transformation in the stereocontrolled generation of the 1,2-trans configuration of the cyclopentene intermediate 6c. Our early synthetic efforts toward 1,2-trans cyclopentene derivatives of type 6, as well as the synthetic pathway to an optimized 13-step total synthesis of 2 (12% overall yield), are reported.     

Novel ruthenium-based metathesis catalysts containing electron-withdrawing ligands: synthesis, immobilization, and reactivity

The syntheses and reactivity of seven different ruthenium-based metathesis catalysts are described. Ru(CF3COO)2(PCy3)(=CH-2-(2-PrO)C6H4) (1), Ru(CF3COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (2), and Ru(CF3COO)2(PCy(3))(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (3) were prepared via chlorine exchange by reacting RuCl2(PCy3)2(=CH-2-(2-PrO)C6H4), RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), and RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), respectively, with silver trifluoroacetate (Cy =cyclohexyl). In analogy, Ru(CF3CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (4) and Ru(CF3CF2CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (5) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with CF3CF2COOAg and CF3CF2CF2COOAg, respectively. Ru(C6F5COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (6) and Ru(C6F5O)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (7) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with C6F5COOTl and C6F5OTl, respectively. Supported catalysts Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (8), Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(=CH-2-(2-PrO)C6H4) (9), and Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (10) were synthesized by reaction of RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), RuCl2(PCy3)(=CH-2-(2-PrO)C6H4), and RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), respectively, with a perfluoroglutaric acid-derivatized poly(styrene-co-divinylbenzene) (PS-DVB) support (silver form). Halogen exchange in PCy3-containing systems had to be carried out in dichloromethane in order to suppress precipitation of AgCl.PCy3. The reactivity of all new catalysts in ring-closing metathesis (RCM) of hindered electron-rich and -poor substrates, respectively, at elevated temperature (45 degrees C) was compared with that of existing systems. Diethyl diallylmalonate (DEDAM, 11), diethyl allyl(2-methylallyl)malonate (12), N,N-diallyl-p-toluenesulfonamide (13), N-benzyl-N-but-1-en-4-ylbut-2-enecarboxylic amide (14), and N-allyl-N-(1-carboxymethyl)but-3-en-1-yl-p-toluenesulfonamide (15) were used as educts. Supported catalysts were prepared with high loadings (2.4, 22.1, and 160 mg of catalyst/g PS-DVB for 8, 9, and 10, respectively). Catalyst 8 showed higher and catalysts 9 and 10 sowed significantly reduced activities in RCM compared to their homogeneous analogues. Thus, with 8, turnover numbers (TONs) up to 4200 were realized in stirred-batch (carousel) RCM experiments. To elucidate the nature of the bound species, catalysts 8-10 were subjected to 13C- and 31P-MAS NMR spectroscopy. These investigations provided evidence for the proposed structures. Leaching of ruthenium into the reaction mixture was low, resulting in ruthenium contents <85 ppb (ng/g) in the final RCM-derived products.     

Low-noise fiber optics receiver with super-beta bipolar transistors

A low-noise wideband optical fiber receiver has been successfully designed using super-beta bipolar transistors (BJTs) at the front end. Even with commercially available super-beta devices, which are not optimized for our application, the obtainable input sensitivity for medium- and high-bandwidth optical receivers is comparable or superior to the best FET design. To demonstrate this concept, a 10-MHz analog receiver was built with a super-beta BJT at the input stage. This receiver achieved an expected average input noise current density of less than 0.4 PA/√Hz over the full bandwidth for a transresistance of 500 kΩ. Detailed design procedures are given in this paper. The noise characteristics of a 50-MHz receiver using super-beta BJTs are also obtained.     

Zur Temperaturabhängigkeit der dielektrischen Relaxationszeit von Polymeren bei höheren Temperaturen

Zusammenfassung In der Arbeit wird über dielektrische Untersuchungen an Polyvinylacetat in einem gro?en Temperaturbereich berichtet, wobei im einzelnen die Temperaturabh?ngigkeit der mittleren Relaxationszeit aus der Maximtimfrequenz von ε′' ermittelt wird. Die Ergebnisse zeigen eine monotone Zunahme der Aktvierungsenergie mit abnehmender Temperatur. In Anlehnung an frühere dielektrische Untersuchungen in der Umgebung der Glastemperatur w?hrend der isothermen Volumenkontraktion (11) erfolgt die Deutung der Me?ergebnisse als ein vom freien Volumen gesteuerter Diffusionsproze?. Die entsprechende Formel für die mittlere Relaxationszeit liefert eine quantitative übereinstimmung mit den Me?ergebnissen und ergibt damit eine Best?tigung der früher entwickelten allgemeinen Theorie der dielektrischen Relaxation der Polymeren (8). Angemeldet als Vortrag auf der Sitzung des Fachausschusses „Physik der Hochpolymeren“ der Deutschen Physikalischen Gesellschaft am 14. April 1966 in Mainz.