Local order around rare earth ions during the devitrification of oxyfluoride glasses

Erbium L(3)-edge extended x-ray absorption fine structure (EXAFS) measurements were performed on rare earth doped fluorosilicate and fluoroborate glasses and glass ceramics. The well known nucleating effects of erbium ions for the crystallization of cubic lead fluoride (based on x-ray diffraction measurements) and the fact that the rare earth ions are present in the crystalline phase (as indicated by Er(3+) emission spectra) seem in contradiction with the present EXAFS analysis, which indicates a lack of medium range structural ordering around the Er(3+) ions and suggests that the lead fluoride crystallization does not occur in the nearest neighbor distance of the rare earth ion. Molecular dynamics simulations of the devitrification process of a lead fluoride glass doped with Er(3+) ions were performed, and results indicate that Er(3+) ions lower the devitrification temperature of PbF(2), in good agreement with the experimental results. The genuine role of Er(3+) ions in the devitrification process of PbF(2) has been investigated. Although Er(3+) ions could indeed act as seeds for crystallization, as experiments suggest, molecular dynamics simulation results corroborate the experimental EXAFS observation that the devitrification does not occur at its nearest neighbor distance.     

Facile Formation of Sulfurized Nanorod-Like ZnO/Zn(OH)2 and Hierarchical Flower-Like γ-Zn(OH)2/ϵ-Zn(OH)2 from a Green Synthesis and Application as Luminescent Solar Concentrator

This research endeavors to overcome the significant challenge of developing materials that simultaneously possess photostability and photosensitivity to UV-visible irradiation. Sulfurized nanorod (NR)-like ZnO/Zn(OH)₂ and hierarchical flower-like γ-Zn(OH)₂/ϵ-Zn(OH)₂ were identified from XRD diffraction patterns and Raman vibrational modes. The sulfurized material, observed by FEG-SEM and TEM, showed diameters ranging from 10 and 40 nm and lengths exceeding 200 nm. The S²⁻ ions intercalated Zn²⁺, modulating NRs to dumbbell-like microrods. SAED and HRTEM illustrated the atomic structure in (101) crystal plane. Its direct band gap of 3.0 eV was attributed to the oxygen vacancies, which also contribute to the deep-level emissions at 422 and 485 nm. BET indicated specific surface area of 4.4 m² g⁻¹ and pore size as mesoporosity, which are higher compared to the non-sulfurized analogue. These findings were consistent with the observed photocurrent, photostability and photoluminescence (PL), further supporting the suitability of sulfurized NR-like ZnO/Zn(OH)₂ as a promising candidate for Luminescent solar concentrators (LSC)-photovoltaic (PV) system.     

A nonradioactive method for detecting phosphates and polyphosphates separated by PAGE

Nonradioactive polyphosphate (poly(P); (PO(3) (-))(n)) species resolved by PAGE can be detected by hydrolytic degradation of the polyphosphates into orthophosphates (P(i)) with a 5 M HCl solution saturated with NaCl, followed by staining the P(i) degradation products in a 1 M HCl solution of 0.25% w/v methyl green and 1% w/v ammonium molybdate. This method detects down to 0.5 nmol of phosphate as P(i), linear poly(P) (condensed phosphate), pyrophosphate (P(2)O(7) (4) (-)), or cyclic trimetaphosphate ion (P(3)O(9))(3) (-) species. This method improves the current method of staining linear poly(P) longer than four phosphate units with Toludine blue-O after PAGE. This study also shows that Stains-All can visualize resolved linear poly(P) shorter than those visualized by Toluidine blue-O. It is hoped that this sequential hydrolytic degradation and phosphate visualization method for detecting ortho-, linear, and cyclic poly(P) species will be a useful tool, as poly(P) are being discovered in a wide variety of biological systems, and their biochemical roles are still largely unknown.     

Oxygen initiated combustion: Thermochemistry and kinetics of unsaturated hydrocarbons

The thermochemistry and kinetics of the initiation reactions involved in the oxidation of unsaturated fuels are explored. The thermochemistry of intermediate radicals, diradicals, and molecular species involved are estimated using group additivity with some assistance from bond additivity. Kinetic parameters are estimated with the techniques of thermochemical kinetics. In the case of acetylene, estimated rate constants are in excellent agreement with experimental results on the induction period and flame speed. It is shown that the route initiated by O₂ addition to an unsaturated carbon atom to produce a 1,4 diradical is faster than any other path available to form radicals capable of propagating a chain. The 1,4 diradicals so produced can generally cyclize to form a dioxetane which exothermically opens to a dialdehyde which is the ultimate radical source. Below 1000 K unsaturates will always initiate oxidation faster than saturated fuels. © 1996 John Wiley & Sons, Inc.     

Generalizations of the Hohenberg-Kohn theorem: I. Legendre transform constructions of variational principles for density matrices and electron distribution functions

Given a general, N-particle Hamiltonian operator, analogs of the Hohenberg-Kohn theorem are derived for functions that are more general than the particle density, including density matrices and the diagonal elements thereof. The generalization of Lieb's Legendre transform ansatz to the generalized Hohenberg-Kohn functional not only solves the upsilon-representability problem for these entities, but, more importantly, also solves the N-representability problem. Restricting the range of operators explored by the Legendre transform leads to a lower bound on the true functional. If all the operators of interest are incorporated in the restricted maximization, however, the variational principle dictates that exact results are obtained for the systems of interest. This might have important implications for practical work not only for density matrices but also for density functionals. A follow-up paper will present a useful alternative approach to the upsilon- and N-representability problems based on the constrained search formalism.     

Zymomonas mobilis as catalyst for the biotechnological production of sorbitol and gluconic acid

The conversion of glucose and fructose into gluconic acid (GA) and sorbitol (SOR) was conducted in a batch reactor with free (CTAB-treated or not) or immobilized cells of Zymomonas mobilis. High yields (more than 90%) of gluconic acid and sorbitol were attained at initial substrate concentration of 600 g/L (glucose plus fructose at 1:1 ratio), using cells with glucose-fructose-oxidoreductase activity of 75 U/L. The concentration of the products varied hyperbolically with time according to the equations (GA)=t(GA)(max)/(W(GA) +t), (SOR)=t (SOR)(max)/(W(Sor)+t), v(GA)=[W(GA) (GA)(max)]/(W(GA)+t)(2) and V(SOR)=[W(SOR) (SOR)(max)]/(W(SOR)+t)(2). Taking the test carried out with free CTAB-treated cells as an example, the constant parameters were (GA)(max)= 541 g/L, (SOR)(max)=552 g/L, W(GA)=4.8h, W(SOR)=4.9h, upsilon(GA)=112.7 g/L. and upsilon(SOR)=112.7 g/L.     

Crystallization of monoclinic WO3 in tungstate fluorophosphate glasses

Tungstate fluorophosphate glass compositions with high WO₃ concentration were prepared in the ternary system (80−0.8x)NaPO₃-(20−0.2x)BaF₂-xWO₃ with x = 40,50 and 60 mol%. Transparency decreases as WO₃ concentration increases but can be improved by addition of oxidizing systems such as CeO₂ or Sb₂O₃/NaNO₃. Characterizations by thermal analysis (DSC) point out that an increase in the amount of WO₃ results in a higher glass transition temperature. In addition, such compositions are very stable against devitrification since samples containing 40% and 50% of WO₃ donot even exhibit the expected crystallization event. In these samples, the stability against crystallization decreases with the WO₃ content and vitreous sample containing 60% of WO₃ exhibits an endothermic event around 620 °C due to crystallization of monoclinic WO₃ phase. In these glasses, it was shown that the nucleation stage can be induced by thermal-treatment when external nucleating agents such as Ti or Sb are used. Finally, gold-doped samples exhibit a higher crystallization tendency and monoclinic WO₃ phase can be grown in such glasses.     

Growth kinetic on the optical properties of the Pb(1-x)Mn(x)Se nanocrystals embedded in a glass matrix: thermal annealing and Mn2+ concentration

Semimagnetic Pb(1-x)Mn(x)Se nanocrystals were synthesized by a fusion method in a glass matrix and characterized by optical absorption (OA), atomic/magnetic force microscopy (AFM/MFM), and photoluminescence techniques. MFM images strongly indicated the formation of Pb(1-x)Mn(x)Se magnetic phases in the glass system. Quantum dot size was manipulated by tuning annealing time. It was shown that Mn(2+) impurity affects nucleation, where Mn(2+)-doped samples present a redshift of the OA peak after a short annealing time and a blueshift after long annealing time compared to undoped PbSe NCs. This behavior was linked to the dependence of band-gap energy and the absorption selection rule on Mn(2+) concentration. Photoluminescence in the Pb(1-x)Mn(x)Se nanocrystals increases as the temperature rises up to a point and then decreases at higher temperatures. Anomalous increases in emission efficiency were analyzed by considering temperature induced carrier-transfer in semimagnetic Pb(1-x)Mn(x)Se quantum dots nanocrystals of different sizes.     

APTES-modified RE2O3:Eu3+ luminescent beads: structure and properties

Europium-doped lanthanide oxide RE(2)O(3):Eu(3+) (RE = Y or Gd) luminescent beads, with a spherical shape and a diameter of 150 ± 15 nm, have been modified by reaction with 3-aminopropyltriethoxysilane (APTES), in order to introduce reactive amine groups at their surfaces. The direct silanation has resulted in the formation of a nanometric layer at the surface of the beads, with an optimum grafting rate of 0.055 ± 0.005 mol APTES/mol RE(2)O(3). Fourier transform infrared (FTIR) and X-ray photoelectron (XPS) spectroscopies confirmed the condensation of an organosilane layer, made of cross-linked -O-Si-O-Si- and of groups -O-Si-R (with R = (CH(2))(3)NH(2) or O-Et). Titration of the accessible amine groups has been performed by simultaneously measuring the luminescence of grafted fluorescein isothiocyanate and that of core particles: there are about 2.3 × 10(4) (2.8 × 10(4)) -NH(2) per Y(2)O(3):Eu(3+) (Gd(2)O(3):Eu(3+)) bead. The isoelectronic point was shifted by one pH unit after APTES modification. The surface modification by APTES at least preserved (for Gd(2)O(3):Eu(3+)) or improved (for Y(2)O(3):Eu(3+)) the red emission of the beads.