INAA analysis of fish homogenate: IAEA-436 and IAEA-407

Detailed investigations have been carried out on the well-known method of spectrophotometric determination of boron particularly in uranium compounds as boron-curcumin complex after extraction into 2-ethyl hexane 1,3-diol (EHD) to understand a number of parameters, which have not been addressed earlier in the literature. These include (i) effect of different acid media on analytical results of boron which are employed for dissolution of nuclear fuel samples, (ii) effect of diluents namely ethyl alcohol and N,N-dimethyl formamide on sensitivity of method which are employed for final dilution, and (iii) studies on loss of boron, if any, during conversion of uranium compounds to U₃O₈. Based on the present studies, the existing procedure has been suitably modified to improve the sensitivity in the measurements. In addition, this paper also describes about interference studies with Al, Cr, Mg, Ca, Fe, Mn, Mo, F⁻ and W and amount of EHD on modified method. Absolute detection limit was found to be 10 ng. The precision and accuracy of the method, is 3% at level 100 ng·g⁻¹ of boron.     

Elastic scattering of neutrons from 28Si and 32S

The excitation functions in the elastic scattering of neutrons have been measured at several angles in the energy range 600–3600 keV. Data have been analyzed in terms of the Ericson fluctuation and energy-averaged angular distributions have been analyzed using the optical model including Hauser-Feshbach theory.     

New concepts in neutrosophic graphs with application

A neutrosophic set is a generalization of an intuitionistic fuzzy set. Neutrosophic models give more flexibility, precisions and compatibility to the system as compared to intuitionistic fuzzy models. In this research study, we apply the concept of neutrosophic sets to graphs and discuss certain concepts of single-valued neutrosophic graphs. We illustrate the concepts by several examples. We investigate some interesting properties. We describe an application of single-valued neutrosophic graph in decision making process. We also present the procedure of our proposed method as an algorithm.     

4D Printing based piezoelectric composite for medical applications

Additive manufacturing (AM), otherwise known as three‐dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education, and medicine. Although a considerable amount of progress has been made in this field, additional research work is required to overcome various remaining challenges. Recently, one of the actively researched areas lies in the AM of smart materials and structures. Electroactive materials incorporated in 3D printing have given birth to 4D printing, where 3D printed structures can perform as actuating and/or sensing systems, making it possible to deliver electrical signals under external mechanical stimuli and vice versa. In this paper, we present a lightweight, low cost piezoelectric material based on the dispersion of inorganic ferroelectric submicron particles in a polymer matrix. We report on how the proposed material is compatible with the AM process. Finally, we discuss its potential applications for healthcare, especially in smart implants prostheses. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 109–115     

Phytochemical screening and in-vitro evaluation of pharmacological activities of peels of Musa sapientum and Carica papaya fruit

Aqueous, absolute and 80% ethanolic extract of fruit peels of Musa sapientum and Carica papaya were investigated for their antibacterial activity, measured by disc diffusion method and antioxidant activity, measured by four different methods. Papaya and banana peels were found to contain terpenoids, tannins, alkaloids, saponins steroid, phenols, fixed oils and fats. 80% ethanolic extract of banana peel was found to contain highest total phenolic content (TPC), total flavonoid content (TFC) and antioxidant activity but in papaya peel, highest TPC and reducing activity was shown by water extract while, TFC and radical scavenging activity was given by 80% ethanolic extract. In banana, water extract showed highest antibacterial activity against tested bacteria while in case of papaya, absolute ethanolic extract showed highest antibacterial activity. The present study revealed that peels of banana and papaya fruits are potentially good source of antioxidant and antibacterial agents.     

Luciferase-transfected colon adenocarcinoma cell line (DLD-1) for use in Orthotopic Xenotransplantation studies

ABSTRACT: BACKGROUND: Renilla Luciferase reporter gene (rLuc) GL4.82 and GL4.13 promoter are key player in transfection, but precise knowledge of its targets in colon cancer remains limited. The aim of this study was to characterize the best transfection technique to produce a stable transfected colon DLD1 (colorectal adenocarcinoma cell line), therefore imaging based approaches were employed. RESULTS: DLD1 cells were transfected with a Plasmid (SV40-RLuc) carrying Renilla luciferase under the control of the SV-40 promoter, by using two different transfection techniques. Cells expressing the required DNA were isolated after antibiotic (Puramycin) selection. Clones of DLD-1/SV40-RLuc were produced using two different techniques (96 well plates and Petri dish) and their florescence intensity was recorded using IVIS machine (Calliper Life Sciences, Hopkinton, USA). Both techniques were characterized with the help of serial dilution technique. Results from this study substantiated that electroporation is the best. As expected, clones varied in their specific luciferase activity along with the dilutions. With the increase in cell concentration increase in intensity of florescence was recorded. CONCLUSIONS: Based on the results we are confident that this transfected cell line DLD-1/SV40-RLuc (colorectal adenocarcinoma cell line) is the best for further Orthotopic Xenotransplantation Studies and in-vivo experiments as well. Investigation shows that DLD1/SV-rLuc cells have gained little bit resistance against both drugs therefore further study is suggested to know the reasons.     

Evaluation of rheological properties and swelling behaviour of sonicated scleroglucan samples

Scleroglucan is a natural polysaccharide that has been proposed for various applications. However there is no investigation on its property variations when the molecular weight of this polymer is reduced. Scleroglucan was sonicated at two different polymer concentrations for different periods of time and the effect of sonication was investigated with respect to molecular weight variations and rheological properties. Molar mass, estimated by viscometric measurements, was drastically reduced already after a sonication for a few min. Sonicated samples were used for the preparation of gels in the presence of borate ions. The effect of borax on the new samples was investigated by recording the mechanical spectra and the flow curves. A comparison with the system prepared with the dialysed polymer was also carried out. The anisotropic elongation, observed with tablets of scleroglucan and borax, was remarkably reduced when the sonicated samples were used for the preparation of the gels.     

Size-fractionated airborne particulate matter characterization of a residential area near Islamabad airport by IBA methods

Size fractionated PM_2.5 and PM_2.5?C10 airborne particulates collected from the airport housing society site in Rawalpindi were characterized using the non destructive ion beam analysis method. Proton induced X-ray emission and Proton induced gamma ray emission were employed to quantify 28 trace elements in fine and coarse filter samples. The average PM_2.5 and PM_2.5?C10 masses were found to be 15.7 and 144???g/m³, respectively which, when combined exceed the Pakistani limit for PM₁₀ of 100???g/m³. The average black carbon (BC) content was found to be 3.49 and 5.95???g/m³ corresponding to 23.8 and 4.30% of the fine and coarse masses, respectively. The reconstructed mass (RCM) was calculated for both particle modes using 5 pseudo sources, namely soil, sulfate, smoke, sea salt and BC. It was found that 5 sources could account for 80.6 and 49.0% of the fine and coarse masses, respectively. The low value of RCM for the coarse mode may imply a much higher organic content. The major sources contributing to the fine mode were soil, sulfate and BC. Similarly for the coarse mass fraction it was found that soil was the major source whereas the sulfate and BC sources did not contribute as much.     

Fabrication of PEGylated Chitosan Nanoparticles Containing Tenofovir Alafenamide: Synthesis and Characterization

Tenofovir alafenamide (TAF) is an antiretroviral (ARV) drug that is used for the management and prevention of human immunodeficiency virus (HIV). The clinical availability of ARV delivery systems that provide long-lasting protection against HIV transmission is lacking. There is a dire need to formulate nanocarrier systems that can help in revolutionizing the way to fight against HIV/AIDS. Here, we aimed to synthesize a polymer using chitosan and polyethylene glycol (PEG) by the PEGylation of chitosan at the hydroxyl group. After successful modification and confirmation by FTIR, XRD, and SEM, TAF-loaded PEGylated chitosan nanoparticles were prepared and analyzed for their particle size, zeta potential, morphology, crystallinity, chemical interactions, entrapment efficacy, drug loading, in vitro drug release, and release kinetic modeling. The fabricated nanoparticles were found to be in a nanosized range (219.6 nm), with ~90% entrapment efficacy, ~14% drug loading, and a spherical uniform distribution. The FTIR analysis confirmed the successful synthesis of PEGylated chitosan and nanoparticles. The in vitro analysis showed ~60% of the drug was released from the PEGylated polymeric reservoir system within 48 h at pH 7.4. The drug release kinetics were depicted by the Korsmeyer–Peppas release model with thermodynamically nonspontaneous drug release. Conclusively, PEGylated chitosan has the potential to deliver TAF from a nanocarrier system, and in the future, cytotoxicity and in vivo studies can be performed to further authenticate the synthesized polymer.