吸管法和比重计法测定土壤机械组成的比对研究

土壤机械组成是土壤的基本属性,也是第三次全国土壤普查(“三普”)的重要指标。参照“三普”规定的测定土壤机械组成的吸管法和比重计法的分析规范对来自河南封丘、江西鹰潭和新疆乌鲁木齐等地区的3种土壤试样进行分析,讨论平行测定的精密度和测定过程中的关键点,进而对两种测定方法进行评价。结果表明,吸管法和比重计法的分析过程中存在一些影响分析结果的重点步骤,这些关键细节对提升“三普”土壤机械组成结果准确性和分析效率至关重要。吸管法和比重计法测定获得的土壤质地类型结果基本一致。通过平行试样测定结果允许的绝对相差分析发现吸管法的精密度较比重计法稍差,但两者都能达到土壤普查的要求。通过两种土壤机械组成测定方法的比对研究,为基层实验室顺利开展本项目的测定提供借鉴,为第三次全国土壤普查工作提供技术支撑。     

A carbonyl-rich covalent organic framework as a high-performance cathode material for aqueous rechargeable zinc-ion batteries

Aqueous rechargeable zinc-ion batteries (ZIBs) provide high theoretical capacity, operational safety, low-cost and environmental friendliness for large-scale energy storage and wearable electronic devices, but their future development is plagued by low capacity and poor cycle life due to the lack of suitable cathode materials. In this work, a covalent organic framework (Tp-PTO-COF) with multiple carbonyl active sites is synthesized and successfully introduced in aqueous rechargeable ZIBs for the first time. Tp-PTO-COF delivers high specific capacities of 301.4 and 192.8 mA h g⁻¹ at current densities of 0.2 and 5 A g⁻¹, respectively, along with long-term durability and flat charge–discharge plateaus. The remarkable electrochemical performance is attributed to the abundance of nucleophilic carbonyl active sites, well defined porous structure and inherent chemical stability of Tp-PTO-COF. Moreover, the structural evolution and Zn²⁺ ion intercalation mechanism are discussed and revealed by the experimental analysis and density functional theory calculations. These results highlight a new avenue to develop organic cathode materials for high performance and sustainable aqueous rechargeable ZIBs.

A covalent organic framework (Tp-PTO-COF) with carbonyl active sites was proposed as a novel cathode material and successfully applied in aqueous rechargeable zinc-ion batteries (ZIBs).     

Rh-Catalyzed Kinetic Resolution-Based Enantioselective [4+2]-Cycloaddition-Isomerization of Allene-1,3-dienes

The first example of Rh-catalyzed kinetic resolution of 1,3-disubstituted allene-1,3-dienes involving intramolecular[4+2]-cycloaddition has been developed.Follo...     

Electrochemical and Structural Characterisation of Dip-Coated Fe/Ti Oxide Films Prepared by the Sol-Gel Route

Thin solid films of mixed Fe/Ti oxide composition (Fe/Ti molar ratios: 0.5∶1, 1∶1, 1.5∶1) have been made from Fe(NO₃)₃ alcoholic solution to which Ti(OiPr)₄ was added. Films have been deposited by the dip-coating technique and heat-treated at 300°C and 500°C. Powders of Fe/Ti oxide heat-treated at 300°C are amorphous, while powders annealed at 500°C for 40 hours transformed to mixed rutile, pseudobrookite and hematite phases. The structure of the XRD amorphous films was identified with the help of near-normal reflection absorption (6°) (IRRA) and near-grazing incidence angle (NGIA) spectroscopy. NGIA FT-IR spectra of films are characterised with a single phonon mode appearing in the spectral range 600–950 cm⁻¹ which shifts with increasing Ti concentration from 675 cm⁻¹ (Fe₂O₃) to 904 cm⁻¹ (TiO₂) thus exhibiting one-mode behavior. Electrochemical investigations made with the help of cyclic voltammetry (CV) and chronocoulometry (CPC) performed in 0.01M LiOH and in 1M LiClO₄/propylene carbonate electrolytes revealed that films are able to uptake reversibly Li⁺ ions with a charge capacity (Q) per film thickness (d) in the range 0.1–0.26 mC/cm²nm and 0.06 mC/cm²nm, respectively. The temperature at which the films were prepared alters the rate of Li⁺ insertion which is faster for less compact films obtained at 300°C. In situ UV-VIS spectroelectrochemical measurements revealed that Fe/Ti oxide films bleached in the UV spectral region (300 nm<λ<450 nm) and colored in the VIS spectral region (450 nm<λ<800 nm), thus exhibiting mixed anodic and cathodic electrochromism.     

Investigation of the composition of complexes and the stoichiometry of non-complex reactions by flow injection method

Combining the Asmus straight-line method with the flow injection (FI) technique, a new FI-straight-line method is established to investigate the formulas of the blue, the purple and the red complexes formed by iron(III) and Tiron in different pH solutions. Using the proposed FI-straight-line method, the stoichiometries of cyanide and harbituric acid for producing the intermediate and the final product of the chromogenic reaction of cyanide with pyridine-barbituric acid reagent are also studied.     

在盐的水溶液中非电解质活度系数的研究(Ⅺ)——正丙酸和正丁酸在苯和盐水溶液间的分配

在25℃下分别测定正丙酸和正丁酸在苯相和纯水相中的分配比,以及在苯相和盐水溶液中的分配比,从而求出酸的活度系数。所用的盐有氯化锂、氯化钠、氯化钾、氯化锶、氯化钡、溴化锂、溴化钠、溴化钾等八种。对弱酸算出了未解离部分的活度系数。在所用盐浓度(0-1mol/l)范围内,作lgf_u-C_s图,都呈直线。比较直线的斜率,对正丙酸为:SrCl₂>BaCl₂>LiCl≈NaCl>LiBr≈NaBr>KCl>KBr。对正了酸为:SrCl₂>BaCl₂>NaCl≈LiC₁>NaBr≈KCl≈LiBr>KBr.指出小离子盐对小脂肪酸盐效应主要是静电力作用。     

IVSPlat 1.0: an integrated virtual screening platform with a molecular graphical interface

Background  

The virtual screening (VS) of lead compounds using molecular docking and pharmacophore detection is now an important tool in drug discovery. VS tasks typically require a combination of several software tools and a molecular graphics system. Thus, the integration of all the requisite tools in a single operating environment could reduce the complexity of running VS experiments. However, only a few freely available integrated software platforms have been developed.     

丝网印刷法制备高催化活性对电极

对电极在染料敏化太阳能电池（DSCs）中主要起催化氧化还原反应及收集电荷的作用,铂对电极常用的制备方法为磁控溅射法,但其成本较高,制备条件苛刻. 本文通过引入低成本的表面活性剂Span-85,所制得的铂对电极的附着力、透光率和均匀性显著改善,实现了面积可控,与两步浸泡法和旋涂热解法制备的对电极在DSCs中的光电转换效率分别为7.30%,6.96%和7.03%. 紫外-可见吸收光谱、扫描电镜和附着力测试等结果表明,（1）添加表面活性剂有利于增加附着力及改善透光率和均匀性;（2）使用该法制备的Pt/FTO对电极的透光率与两步浸泡法制作的相同,且铂粒子分布更加均匀. 电化学阻抗图谱、塔菲尔极化曲线和循环伏安曲线结果表明,丝网印刷方法制备的Pt/FTO对电极具有更加优异的催化性能,且该法更有利于降低其生产成本和大规模生产.