二维二氧化硅改性聚环氧乙烷基固态聚合物电解质用于增强锂离子电池性能

通过改性由酸蚀二维蛭石制备的二维二氧化硅,得到带正电荷的二维介孔二氧化硅(PSN⁺)纳米片,并将PSN⁺用作聚环氧乙烷(PEO)基固体聚合物电解质(SPEs)的填料。由于PSN⁺具有丰富的正电荷,PSN⁺与锂盐解离的阴离子能够有效结合,从而促进锂离子的运输,获得较好的锂离子转移数。在50 ℃时,基于PSN⁺的SPEs表现出较高的离子电导率(7.5×10^-5 S·cm^-1),锂离子迁移数为0.30,稳定电压窗为4.41 V。因此,组装后的LiFePO₄锂电池在50 ℃、0.2C下具有优异的初始放电比容量(155.7 mAh·g^-1),在循环100次后容量保持率为97.1%。     

两个3-甲基-2-乙酰吡嗪缩4-苯基氨基脲双核铜Ⅱ配合物的晶体结构及与DNA的相互作用

合成并通过单晶X射线衍射、元素分析及红外光谱表征了配合物[Cu₂（L）₂Cl₂]（1）和[Cu₂（L）₂（OAc）₂]（2）的结构（HL为3-甲基2-乙酰吡嗪缩4-苯基氨基脲）。单晶衍射结果表明,2个配合物中,每个拥有四方锥配位构型的Cu(Ⅱ)离子与来自1个阴离子配体L^-的N₂O电子供体和2个阴离子配位（1中为氯离子,2中为醋酸根离子）,其中1个阴离子为μ²桥联配位模式。荧光光谱结果表明,配合物与DNA的相互作用强于配体。     

基于2-苯基-4-喹啉酸及双咪唑类配体的钴(Ⅱ)配合物的合成、表征、磁性和电化学性质

利用2-苯基-4-喹啉酸、苯-1,4-双(咪唑基-1-甲基)和乙酸钴在二甲基甲酰胺和水的混合溶剂中反应,得到配合物[Co(pqba)2(biyb)](1)(Hpqba=2-苯基-4-喹啉酸,biyb=苯-1,4-双(咪唑基-1-甲基))。采用元素分析、红外光谱、X单晶衍射结构分析、热重分析等方法对配合物进行了表征和结构测定。配合物1属单斜晶系,C2/c空间群。配合物1中的biyb配体采用双齿桥链模式连接金属钴离子首先形成一维"之"字链,通过π…π堆积作用,进一步拓展为二维超分子结构。循环伏安法测试结果说明配合物1的电解过程为准可逆过程。磁化率测量表明,配合物1具有反铁磁性质。     

钪元素对AB2型合金Zr1-xScxMn0.6V0.2Ni1.2Co0.1（x=0～1）储氢和电化学性能的影响

用真空电弧熔炼方法制备了Zr1-xScxMn0.6V0.2Ni1.2Co0.1(x=0～1)AB2型储氢合金,研究了Sc元素替代Zr对合金的微观组织结构、气态储氢及电化学性能的影响。研究结果表明,Zr1-xScxMn0.6V0.2Ni1.2Co0.1合金主要是由FCC型C15相、CsCl型结构的(ScZr)Ni相和少量的Ni10Zr7相组成,随Sc含量的增加,C15相丰度逐渐减小,(ScZr)Ni相丰度逐渐增加,当x=0.2时Ni10Zr7相基本消失;Sc元素对合金的首次气态吸氢动力学行为影响较大,随Sc含量的增加,合金吸氢动力学性能逐渐变缓,但吸氢容量逐渐提高,直至达x=1.0时的最大吸氢量1.87%;Sc元素对合金吸氢PCT曲线平衡氢压的影响规律不明显,随Sc含量增加,合金氢化物的形成焓ΔH从-26.66 kJ.mol-1逐渐减小到-8.14 kJ.mol-1。Sc元素的加入可明显改善合金电极的活化性能,提高放电容量,随Sc含量的增加,合金电极最大放电容量从x=0时的350.3 mAh.g-1增加到x=1时的429.8 mAh.g-1,呈先减小后增大的趋势,但电极容量的保持率S100随Sc含量增加而快速下降。     

基于2-苯基-4-喹啉酸及双咪唑类配体的钴(Ⅱ)配合物的合成、表征、磁性和电化学性质

利用2-苯基-4-喹啉酸、苯-1, 4-双(咪唑基-1-甲基)和乙酸钴在二甲基甲酰胺和水的混合溶剂中反应, 得到配合物[Co(pqba)₂(biyb)](1) (Hpqba=2-苯基-4-喹啉酸, biyb=苯-1, 4-双(咪唑基-1-甲基))。采用元素分析、红外光谱、X单晶衍射结构分析、热重分析等方法对配合物进行了表征和结构测定。配合物1属单斜晶系, C2/c空间群。配合物1中的Biyb配体采用双齿桥链模式连接金属钴离子首先形成一维“之”字链, 通过π…π堆积作用, 进一步拓展为二维超分子结构。循环伏安法测试结果说明配合物1的电解过程为准可逆过程。磁化率测量表明, 配合物1具有反铁磁性质。     

Determination of Sulfide by Hematoxylin Multiwalled Carbon Nanotubes Modified Carbon Paste Electrode

This study investigates a new approach for the amperometric determination of sulfide using a hematoxylin multiwalled carbon nanotubes modified carbon paste electrode (HM‐MWCNTs/CPE). The experimental results show that HM‐MWCNTs/CPE significantly enhances the electrocatalytic activity towards sulfide oxidation. Cyclic voltammetric studies show that the peak potential of sulfide shifted from +400 mV at unmodified CPE to +175 mV at HM‐MWCNTs/CPE. The currents obtained from amperometric measurements at optimum conditions were linearly correlated with the concentration of sulfide. The calibration curve was obtained for sulfide concentrations in the range of 0.5–150×10^?6 mol L^?1. The detection limit was found to be 0.2×10^?6 mol L^?1 for the amperometric method. The proposed method was successfully applied to a river water sample in Pardubice, Czech Republic.     

膦配体取代的乙基乙撑双铁配合物的合成、晶体结构及电化学催化性能

以母体配合物[Fe₂(CO)₆(μ-SCH₂CH(CH₂CH₃)S)](1)分别与三(2-呋喃基)膦、二苯基丙基膦、双(二苯基膦)乙炔、1,2-双(二苯基膦基)苯和脱羰试剂Me₃NO·2H₂O反应,制备了单取代配合物[Fe₂(CO)₅(L)(μ-SCH₂CH(CH₂CH₃)S)](L=P(2-C₄H₃O)₃,2;Ph₂PCH₂CH₂CH₃,3)、桥联配合物{[Fe₂(CO)₅(μ-SCH₂CH(CH₂CH₃)S)]2(Ph₂PC≡CPPh₂)}(4)和螯合配合物[Fe₂(CO)₄(κ²-(Ph₂P)₂(1,2-C₆H₄))(μ-SCH₂CH(CH₂CH₃)S)](5)。配合物2~5经元素分析、红外光谱、核磁共振氢谱和磷谱表征,并进一步得到单晶X射线衍射的确证。电化学研究表明,在弱酸HOAc作为质子源存在的情况下,这些配合物可以实现催化质子还原产生氢气的功能。     

MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

Modulation of Multifunctional N,O,P Ligands for Enantioselective Copper‐Catalyzed Conjugate Addition of Diethylzinc and Trapping of the Zinc Enolate

In this work, we have successfully synthesized a new family of chiral Schiff base–phosphine ligands derived from chiral binaphthol (BINOL) and chiral primary amine. The controllable synthesis of a novel hexadentate and tetradentate N,O,P ligand that contains both axial and sp³‐central chirality from axial BINOL and sp³‐central primary amine led to the establishment of an efficient multifunctional N,O,P ligand for copper‐catalyzed conjugate addition of an organozinc reagent. In the asymmetric conjugate reaction of organozinc reagents to enones, the polymer‐like bimetallic multinuclear Cu? Zn complex constructed in situ was found to be substrate‐selective and a highly excellent catalyst for diethylzinc reagents in terms of enantioselectivity (up to >99 % ee). More importantly, the chirality matching between different chiral sources, C₂‐axial binaphthol and sp³‐central chiral phosphine, was crucial to the enantioselective induction in this reaction. The experimental results indicated that our chiral ligand (R,S,S)‐ L1 ‐ and (R,S)‐ L4 ‐based bimetallic complex catalyst system exhibited the highest catalytic performance to date in terms of enantioselectivity and conversion even in the presence of 0.005 mol % of catalyst (S/C=20 000, turnover number (TON)=17 600). We also studied the tandem silylation or acylation of enantiomerically enriched zinc enolates that formed in situ from copper‐ L4 ‐complex‐catalyzed conjugate addition, which resulted in the high‐yield synthesis of chiral silyl enol ethers and enoacetates, respectively. Furthermore, the specialized structure of the present multifunctional N,O,P ligand L1 or L4 , and the corresponding mechanistic study of the copper catalyst system were investigated by ³¹P NMR spectroscopy, circular dichroism (CD), and UV/Vis absorption.