Investigations of the effects of ultrasound on some metal and nonmetal systems

The effects of power ultrasound on four metal-nonmetal powdered systems: copper-sulphur iron-sulphur, zinc-sulphur and magnesium-sulphur in various solvents, such as hexane and carbon disulphide, are briefly examined here. For each system, a sonication time of 30 min was affected. The sonicated products are analysed by X-ray diffraction, X-ray fluorescence and atomic absorption spectrophotometry to determine their qualitative and quantitative compositions and the percentage yields of the products obtained are then compared and discussed.     

Determination of Bone Trabeculae Modulus—An Ultrasonic Scanning and MicroCT (μCT) Imaging Combination Approach

To date, there is no method to measure non-destructively the modulus of trabeculae within cancellous bone, whilst retaining its structural integrity. In this study ultrasonic scanning, coupled with microCT imaging, is employed to determine trabeculae modulus along the three major anatomical axes non-destructively. The proposed method allows cancellous bone specimens to remain intact, for possible use in subsequent studies. Volume rendering of the microCT images allows three-dimensional visualization of cancellous bone specimens to be tested. This facilitates trabeculae selection and accurate measurement of distance traveled by the ultrasonic wave, thus yielding a good degree of confidence in the acoustic velocity measured. For all the three principal anatomical directions, the measured acoustic speeds ranged from 2,115 to 3,077 m/s, giving an average of 2,505 m/s. Average wave velocities in the superior–inferior, medial–lateral and anterior–posterior anatomical directions were found to be 2,295, 2,469 and 2,754 m/s, respectively; the differences corresponding to the three directions do not appear to be significant. Subsequently, the modulus was then determined using elastic wave propagation theory.     

Effect of pyridazine structure on thin‐film polymerization and phase behavior of thermotropic liquid crystalline copolyesters

An intensive study has been conducted to compare the effects of malei hydrazine (MH) and hydroquinone (HQ) on the liquid crystallinity and phase transition behavior in the ABA/HQ/TFTA and ABA/MH/TFTA copolyesters (p‐acetoxybenzoic acid (ABA) and tetrafluoroterephthalic acid (TFTA)). These two copolyesters were prepared by thin‐film polymerization and characterized by differential scanning calorimetry (DSC), polarizing light microscope (PLM), wide‐angle X‐ray diffraction (WAXD), as well as Cerius² computational simulation. Characterization and comparison of the liquid crystalline (LC) evolution and morphology changes of HQ moiety with corresponding MH moiety suggest that ABA/MH/TFTA system is energetically favorable to mesophase formation than ABA/HQ/TFTA system. When the films are quenched, a surface microcrack decoration is observed in both systems. Both systems, which have the persistence ratio larger than 6.42, satisfy the minimum requirement for the LC formation by molecular science software. The ABA/MH/TFTA film exhibits only one single peak transition. However, two distinct transitions have been observed in the ABA/HQ/TFTA system. The average Avrami exponent, n, is ～1.2, and PLM and WAXD results suggest mesophase transition in ABA/MH/TFTA film. As reflected by the results obtained from PLM, WAXD, and DSC studies, the phase transition is confirmed as crystal → nematic → isotropic in ABA/HQ/TFTA copolyester. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2230–2242, 2005     

The decay of 235U

Twenty-eight γ-rays, ten of which are reported for the first time, have been observed in the decay of ²³⁵U, and all have been placed in a revised level scheme for ²³¹Th. Three new levels at 390.27, 317.42 and 240.82 keV respectively have been proposed and the data are in accord with he results of coincidence studies. Reduced transition probabilities of inter-band γ-ray transitions are calculated from the data and compared with theory and an estimate of the intrinsic quadrupole moment, Q_O has been computed.     

Surface microcracks decoration and disclination defects of wholly aromatic liquid crystalline copolyesters

An intensive study has been conducted to map the director fields of disclination of nematic liquid crystalline copolyesters. In this study, films of two wholly aromatic main-chain polyesters containing para- (ABA/MH/TFTA) and meta-linkages (ABA/MH/TFIA) (ABA, p-acetoxybenzoic acid; MH, maleic hydrazine; TFTA, tetrafluoroterephthalic acid; TFIA, tetrafluoroisophthalic acid) were synthesized to investigate the effects of kinks on liquid crystallinity, disclination strength (S), and surface microcracks decoration. These two copolyesters were prepared by in-situ thin film polymerization and characterized by polarizing light microscope, wide-angle X-ray diffraction, as well as "rotational isomeric states" (RIS) Metropolis Monte Carlo (RMMC) simulation. An optical microscope shows that the surface microcracks forms in the nematic-mosaic texture during a rapid quenching. The ABA/MH/TFTA film exhibits disclination strength with S = +1 and S = -(1)/(2); however, disclination strengths with S = +/-1 have been observed in the ABA/MH/TFIA system. To our best knowledge, this is the first paper reporting the effects and evidence of kink (meta and para moieties) on topological defect of disclination. In addition, the RMMC analysis supports the liquid crystal formation in both polyester films with a persistence ratio greater than 6.42.     

Typical conversion of lignocellulosic biomass into reducing sugars using dilute acid hydrolysis and alkaline pretreatment

The development and production of fossil fuel alternatives have become one of the main focal points in recent investigations. Lignocellulosic biomass is a renewable source of fermentable sugars for second-generation biofuels and chemicals via biotechnological pathways. However, the presence of lignin and hemicellulose in lignocellulosic biomass makes it difficult for the biomass to be hydrolyzed or digested during fermentation. Thus, effective biomass pretreatment is vital. The present review shows that chemical pretreatment is the current preferred method to obtain high sugar yields at low cost, with dilute acid and alkaline hydrolysis as the two most reported technologies. Dilute acid favours hydrolysis of the hemicelluloses whereas alkaline hydrolysis targets the lignin fraction. Both methods have merits and demerits, and have been combined with other treatments such as hydrothermal and enzymatic hydrolysis. Further investigation is required to improve the pretreatment processes and to ensure the economic viability of bioconversion.