Investigation of high shear wet granulation processes using different parameters and formulations

This study compared the granulation processes for different formulations using a laboratory-scale high shear mixer. The effects of critical process parameters (impeller speed, chopper speed and kneading time) on granule characteristics were evaluated. The characteristics of the granules studied included the size distribution, friability and morphological properties. The flow profiles of the wet mass and material deposition during the process were also studied. The results obtained showed that the effect of the impeller speed was determined by the starting material system. On the other hand, chopper speeds from 1200 to 3600 rpm and kneading times from 120 to 240 s had a consistent influence on all formulations. Moreover, it was found that the toroidal flow pattern of the wet mass could be maintained for a longer period and granules with a good spherical shape were obtained by removing the chopper during the last 120 s of the granulation process. In addition, the use of the pregelatinized starch in the formulation also led to a reduction in the wall adhesion of the material. It was concluded that the effectiveness of high shear wet granulation could be improved by choosing a proper combination of starting material and process parameters and by monitoring the mass motion during the process.     

Direct patterning of composite biocompatible microstructures using microfluidics

This study demonstrates a versatile and fast method for patterning three-dimensional (3D) monolithic microstructures made of multiple (up to 24 demonstrated) types of materials, all spatially aligned, inside a microchannel. This technique uses confocal scanning or conventional fluorescence microscopy to polymerize selected regions of a photocurable material, and microfluidics to automate the delivery of a series of washes and photocurable reagents. Upon completion of lithographic cycles, the aligned 3D microstructures are suitable for microfluidic manipulation and analysis. We demonstrated the fabrication of composite 3D microstructures with various geometries, size scales (up to 1 mm2), spatial resolution (down to 3 microm), and materials. For a typical multi-cycle process, the total fabrication time was tens of minutes, compared to tens of hours for conventional methods. In the case of 3D hydrogels, a potential use is the direct patterning of inhomogeneous 3D microenvironments for studying cell behavior.     

Densitometric Determination of Taurine and l-Lysine Hydrochloride in an Energy Drink and in Multi-Vitamin Syrup,and Validation of the Method

JPC – Journal of Planar Chromatography – Modern TLC - A simple and rapid densitometric method has been developed for determination of taurine and lysine in ‘energy drinks’...     

TLC Determination of Clobetasol Propionate in Topical Preparations,and Validation of the Method

JPC – Journal of Planar Chromatography – Modern TLC -     

Mixing with bubbles: a practical technology for use with portable microfluidic devices

This paper demonstrates a methodology for micromixing that is sufficiently simple that it can be used in portable microfluidic devices. It illustrates the use of the micromixer by incorporating it into an elementary, portable microfluidic system that includes sample introduction, sample filtration, and valving. This system has the following characteristics: (i) it is powered with a single hand-operated source of vacuum, (ii) it allows samples to be loaded easily by depositing them into prefabricated wells, (iii) the samples are filtered in situ to prevent clogging of the microchannels, (iv) the structure of the channels ensure mixing of the laminar streams by interaction with bubbles of gas introduced into the channels, (v) the device is prepared in a single-step soft-lithographic process, and (vi) the device can be prepared to be resistant to the adsorption of proteins, and can be used with or without surface-active agents.     

Absolute branching fraction measurements of exclusive D+ semileptonic decays

Using data collected at the psi(3770) resonance with the CLEO-c detector at the Cornell e+e- storage ring, we present improved measurements of the absolute branching fractions of D+decays to K0e+ve, pi0e+ve, K*0e+ve, and p0e+ve, and the first observation and absolute branching fraction measurement of D+ --> omega e+ve. We also report the most precise tests to date of isospin invariance in semileptonic D0 and D+ decays.