Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

玻色—爱因斯坦凝聚和兰姆位移

扼要地介绍了ＢＥＣ研究的近况和研究方向，同时报道了我们在ＢＥＣ的光散射和兰姆位移方面的研究工作     

三十烷醇在GA_3影响水稻幼苗生长和生理性状中的增效作用

微量三十烷醇（ＴＲＩＡ）与ＧＡ３配合使用，比ＧＡ３单独使用能明显地促进幼苗生长和增加幼苗干物质积累．同时还增强了ＧＡ３对幼叶中叶绿素含量、可溶性蛋白质含量、呼吸速率、细胞膜透性和过氧化物酶活性的影响．ＧＡ３＋ＴＲＩＡ与ＧＡ３处理相比，促进幼叶内源ＧＡ３水平提高，稳定保持内源ＺＴ于一定水平，ＴＲＩＡ在ＧＡ３低浓度时降低ＩＡＡ水平，在高浓度时则提高ＩＡＡ水平．作者认为ＴＲＩＡ可作为ＧＡ３处理时的增效剂．     

常压催化加氢合成邻氨基苯酚的研究

用硅溶胶改性的漆原镍催化剂，在常压液相催化条件下，氢化邻硝基苯酚制备邻氨基苯酚的反应过程，可分为诱导期、恒速吸氢阶段、吸氢衰减期３个反应阶段．恒速吸氢阶段的吸氢速率为５×１０２ｍｏｌ／（ｋｇ·ｍｉｎ）且与体系的温度无关，诱导期随温度的增加而变短，吸氢衰减期的长短随溶剂量的变化而变化．实验结果表明，邻氨基苯酚的收率在９５％左右．     

Plant tissue-based chemiluminescence biosensor for ethanol.

A plant tissue-based chemiluminescence biosensor for ethanol based on using mushroom (Agaricus bisporus) tissue as the recognition element is proposed in this paper. The principle for ethanol sensing relies on the luminol-potassium hexacyanoferrate(III)-hydrogen peroxide transducer reaction, in which hydrogen peroxide is produced from the ethanol enzymatic catalytic oxidation by oxygen under the catalysis of alcohol oxidase in the tissue column. Under optimum conditions, the method allowed the measurement of ethanol in the range of 0.001 - 2 mmol/l with a detection limit (3 sigma) of 0.2 micromol/l. The relative standard deviation (RSD) was 4.14% (n = 11) for 0.05 mmol/l ethanol. The proposed method has been applied to the determination of ethanol in biological fluids and beverages with satisfactory results.     

复合结构丝中的电流密度分布和巨磁阻抗效应

提出了由中间为高电导率的非铁磁性金属丝外面包裹一层铁磁材料组成的复合结构丝的电流 密度分布和巨磁阻抗(GMI)效应模型，并对Cu/FeCoNi复合丝进行了数值模拟. 结果表明：在 相同的磁性材料几何尺寸和磁特性时，Cu/FeCoNi复合丝铁磁层内的电流随频率的升高比匀 质FeCoNi铁磁丝内的电流更趋于表面分布，而且开始出现趋肤效应时对应的频率明显降低. 当在比较低的频率下就可以观察到明显的MI变化时，复合结构丝中的电阻和电抗变化主要是 由趋肤效应引起，趋肤效应仍然是引起复合结构材料(包括多层薄膜结构) 关键词： 电流密度 巨磁阻抗效应 趋肤效应     

解初值问题y″=g(x，y)的含参数块方法

1引言对于二阶常微分方程的初值问题y″=g(x,y),y(x_0)=y_0,y′(x_0)=y_0′,x_0(?)x(?)T(1)的数值解法的研究引起人们的广泛兴趣．对于直接积分(1),自从1976年J．D．Lambert和I．A．Waston提出二阶P-稳定方法和1978年G．Dahlquist证明P-稳定常系数线性多步方法的最高相容阶不超过2的重要结论以来,截止目前,已积累了许多高于2阶的P-稳定方法．例如,修正的Numerov方法,混合法(特殊形式RK的方法),多导法,Obrechkoff方法,显式RKN方法,单隐方法和对角隐式RKN方法等(顺便指出,文献[5,16]中所说的高阶方法的相容阶均不超过4)．所有这些方法,有些相     

Wavelet and harmonic filtering for distortion-invariant volume holographic correlation

The wavelet and harmonic filtering method suggested by Zalevsky and Ouzieli is introduced in this paper and adopted in our volume holographic image recognition system. This composite filter combines several scaled versions of the cascaded wavelet and harmonic filter, obtaining high discrimination ability and wide dynamic range of rotation and scale deformations. Optical experiments are conducted to demonstrate the validity and practicability of the algorithm. To the best of our knowledge, this is the first report of using this algorithm in a volume holographic system. Moreover, the separate correlation approach proposed in this paper greatly simplifies the manufacturing process and reduces the cost of the system.