The cationic polymerization and copolymerization of isopropenylmetallocene monomers

Three types of isopropenylmetallocene monomers were synthesized and subjected to polymerization and copolymerization by cationic initiators; (1) isopropenylferrocene (IF); (2) (η⁵-isopropenylcyclopentadienyl)dicarbonylnitrosylmolybdenum (IDM); and (3) 1,1′-diisopropenylcyclopentadienylstannocene (DIS), and related derivatives of each. IF was synthesized by a three-step procedure involving the acetylation of ferrocene, conversion of the latter to 2-ferrocenyl-2-propanol, and dehydration of the carbinol. IF was homopolymerized under various cationic initiation conditions, but only low molecular weight homopolymers were obtained. Copolymerization of IF with styrene and with p-methoxy-α-methylstyrene also gave only low molecular weight products. The formation of only low molecular weight polymers in all polymerization reactions is believed to result from the effect of the unusually high stability of ferrocenyl carbenium ions on its propagation reaction. The observed polymerization behavior of α-trifluoromethylvinylferrocene is in accord with this conclusion. IDM and DIS did not form polymeric products under cationic conditions, although copolymers could be obtained for each of these monomers and styrene with a free radical polymerization initiator (AIBN).     

Aldol reactions of a cyclobutanone enolate

Addition of an aldehyde and zinc chloride to a cyclobutanone enolate, prepared by the reaction of an α-chlorocyclobutanone with dimethylcopperlithium, gave an aldol adduct in good yield.     

Activation and racemization of trifluoroacetate esters in the cationic polymerization of styrene

1-Phenylethyl trifluoroacetate ( 1 ) does not react directly with styrene but it is readily incorporated into polymer chains in the presence of an excess of trifluoroacetic acid. The proportion of the nondeuterated 1-phenylethyl end groups in the polymerization of deuterated styrene coinitiated with the acid was much higher than the proportion of the end groups formed by direct incorporation of the acidic protons ([CH₃? CHPh? CD₂? CDPh? …] > [HCD₂? CDPh? CH₂? CDPh? …]). The racemization of the optically active ester-(pseudo-first order rate constant at [HA]₀ = 0.79 mol/L at 20°C equals k^R = 1.7 × 10^?4 S^?1) is more rapid than the incorporation of the ester into polymer chains (k^E = 1.5 × 10^?4 mol^?1 Ls^?1, [M]₀ < 0.4 mol L^?1, i.e., k^R > k^E · [M]). These results and the complete loss of the optical activity in the final polymer indicate that the ester is activated by the acid but it is incorporated into polymer chain via ionic intermediates.     

多支链烷基苯磺酸钠水溶液的表面性质

用自制的四种高纯度多支链烷基苯磺酸钠,研究了支链结构对其表面性质的影响.结果表明,随支链烷基碳数增加,临界胶束浓度降低,标准吸附自由能DGadӨ更负;但是,饱和吸附量Γmax却随支链烷基碳数增加而减小,且临界胶束浓度时的表面张力γcmc随吸附量减小而降低,表现出与一般表面活性剂不同的变化趋势.从多支链烷基苯磺酸钠的分子结构特点,解释了随支链烷基碳数增加Γmax和γcmc的变化规律,探讨了分子的独占面积(as)对Γmax及γcmc的影响.     

Development and validation of an isotope-dilution electrospray ionization tandem mass spectrometry method with an on-line sample clean-up device for the quantitative analysis of the benzene exposure biomarker S-phenylmercapturic acid in human urine

An isotope-dilution electrospray ionization tandem mass spectrometry (ESI-MS/MS) method with an on-line sample clean-up device, for the quantitative analysis of human urine for the benzene exposure biomarker S-phenylmercapturic acid (SPMA), was developed and validated. The sample clean-up system was constructed from an autosampler, a reversed-phase C18 trap cartridge, a two-position switching valve, and controlling computer software and hardware. The sample clean-up system was interfaced via 1/20 splitting to the ESI source of a triple-quadrupole mass spectrometer using negative ion mode and multiple reaction monitoring for SPMA and the isotope-labeled internal standard. A strategy was adopted to acquire pooled blank urine matrix and quality control samples spiked with standards. Validated procedures and data on method specificity, detection limits, standard curves, precision and recovery, sample storage stability, and inter-laboratory comparison are presented. The analytical system was fully automated. No tedious manual sample clean-up procedures are required. With the selectivity and the sensitivity provided by ESI-MS/MS detection, the analytical system can be used for high-throughput and accurate determination of SPMA levels in human urine samples, as a biomarker for environmental as well as occupational benzene exposure.     

胞嘧啶水溶液体系辐解的瞬态产物研究

Using the ns pulse radolysis, we studied the characteristic absorption spectrum and kinetic decay of cytosine anion radical (Cyt-). Results showed that the characteristic absorption of Cyt- was located at λ=355±5 nm, and decayed following the first order kinetics with τ1/2=265 ns at pH=7.0. The decay became slower and τ1/2 rapidly rised with the increment of pH value, Cyt- protonated at C6 in acidic solution, and the characteristic absorption was located at λ=310±5 nm, and decayed following the second order kinetics: Cyt- protonated at N3 in aqueous solution of pH≥7, and the characteristic absorption was located at λ=295±5 nm, and decayed following the second order kinetics.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

A microfabricated capillary electrophoresis chip with multiple buried optical fibers and microfocusing lens for multiwavelength detection

We present a new microfluidic device utilizing multiwavelength detection for high-throughput capillary electrophoresis (CE). In general, different fluorescent dyes are only excited by light sources with appropriate wavelengths. When excited by an appropriate light source, a fluorescent dye emits specific fluorescence signals of a longer wavelength. This study designs and fabricates plastic micro-CE chips capable of performing multiple-wavelength fluorescence detection by means of multimode optic fiber pairs embedded downstream of the separation channel. For detection purposes, the fluorescence signals are enhanced by positioning microfocusing lens structures at the outlets of the excitation fibers and the inlets of the detection fibers, respectively. The proposed device is capable of detecting multiple samples labeled with different kinds of fluorescent dyes in the same channel in a single run. The experimental results demonstrate that various proteins, including bovine serum albumin and beta-casein, can be successfully injected and detected by coupling two light sources of different wavelengths to the two excitation optic fibers. Furthermore, the proposed device also provides the ability to measure the speed of the samples traveling in the microchannel. The developed multiwavelength micro-CE chip could have significant potential for the analysis of DNA and protein samples.     

Theoretical study of “deep” fragmentation of hemin ion with successive loss of methyl and vinyl groups

The electronic and geometric structures, energy stability, normal mode frequencies, and spin density distribution have been calculated by the density functional theory B3LYP method with the Gen = 6-31+G*(Fe) + 6-31G(C,H,N,O), 6-31G*, and 6-311++G** basis sets for the deep fragmentation products of the free hemin ion with successive removal of methyl and vinyl groups in the electronic states with different multiplicities. The computation results are compared with the available experimental data and previous computation results for the fragmentation products of the isolated heme molecule and hemin ion with removal of carboxymethyl groups. The trends in the behavior of these properties are analyzed as a function of multiplicity, external charge, and the number of peripheral substituents at the porphyrin core.