Three-dimensional bundle-like multiwalled carbon nanotubes composite for supercapacitor electrode application

Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m²/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high C_b because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance C_s (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes.     

A family of vanadate esters of monoionized and diionized aromatic 1,2-diols: synthesis,structure, and redox activity

The concerned diols (general abbreviation, H(2)L) are catechol (H(2)L(1)) and its 3,5-Bu(t)(2) derivative (H(2)L(2)). Esters of the type VO(xsal)(HL), 2, are obtained by reacting H(2)L with VO(xsal)(H(2)O) or VO(xsal)(OMe)(HOMe), where xsal(2-) is the diionized salicylaldimine of glycine (x = g), L-alanine (x = a), or L-valine (x = v). The reaction of VO(acac)(2) with H(2)L and the salicylaldimine (Hpsal) of 2-picolylamine has furnished VO(psal)(L), 3. In the structures of VO(gsal)(HL(1)), 2a, and VO(vsal)(HL(2)), 2f, the HL(-) ligand is O,O-chelated, the phenolic oxygen lying trans to the oxo oxygen atom. The xsal(2-) coligand has a folded structure and the conformation of 2f is exclusively endo. In both 2a and 2f the phenolic oxygen atom is strongly hydrogen bonded (O...O, 2.60 A) to a carboxylic oxygen atom of a neighboring molecule. In VO(psal)(L(2)).H(2)O, 3b, the diionized diol is O,O-chelated to the metal and the water molecule is hydrogen bonded to a phenoxidic oxygen atom (O.O, 2.84 A). The C-O and C-C distances in the V(diol) fragment reveal that 2 is a pure catecholate and 3 is a catecholate-semiquinonate hybrid. In solution each ester gives rise to a single (51)V NMR signal (no diastereoisomers), which generally shifts downfield with a decrease in the ester LMCT band energy. The V(V)/V(IV) and catecholate-semiquinonate reduction potentials lie near -0.75 and 0.35, and 1.10 and 0.70 V vs SCE for 2 and 3, respectively. Molecular oxygen reacts smoothly with 2 quantitatively furnishing the corresponding o-quinone, and in the presence of H(2)L the reaction becomes catalytic. In contrast, type 3 esters are inert to oxygen. The initial binding of O(2) to 2 is proposed to occur via hydrogen bonding with chelated HL(-).     

Tetra chlorocopper(II) chemistry: delineation of optical, thermal properties

The thermal decomposition paths of pyridinium tetra chlorocopper(II) (A) differs from the anilinium tetra chlorocopper(II) (B). In the case of pyridinium tetra chlorocopper(II) it loses two molecules of pyridinium hydrochloride and CuCl₂ is formed in the temperature range of 140–350 °C. Whereas the anilinium tetra chlorocopper(II) (B) loses one mole of anilinum hydrochoride along with one molecule of aniline. The compound B has a well define structural change taking place in the region of 70–110 °C which is reflected in DSC as well as resistance measurements. The p-methoxy anilinium tetra chlorocopper(II) monohydrate (C) shows solvatochromicity. The absorption maximum of p-methoxy anilinium tetra chlorocopper(II)monohydrate in acetonitrile (460 nm) changes to 570 nm on addition of methanol. The absorption at 570 nm can be switched back to 460 nm by suppression of ligand exchange with addition of hydrochloric acid. Thus, chemically driven optical switching properties can be observed.     

Synthesis, structural characterization, photophysical, electrochemical, and anion-sensing studies of luminescent homo- and heteroleptic ruthenium(II) and osmium(II) complexes based on terpyridyl-imidazole ligand

A series of hetero- and homoleptic tridentate ruthenium(II) and osmium(II) complexes of compositions [(tpy-PhCH(3))Ru(tpy-HImzphen)](ClO(4))(2) (1), [(H(2)pbbzim)Ru(tpy-HImzphen)](ClO(4))(2) (2), and [M(tpy-HImzphen)(2)](ClO(4))(2) [M = Ru(II) (3) and Os(II) (4)], where tpy-PhCH(3) = 4'-(4-methylphenyl)-2,2':6',2"-terpyridine, H(2)pbbzim = 2,6-bis(benzimidazole-2-yl)pyridine and tpy-HImzphen = 2-(4-[2,2':6',2"]terpyridine-4'-yl-phenyl)-1H-phenanthro[9,10-d]imidazole, have been synthesized and characterized by using standard analytical and spectroscopic techniques. X-ray crystal structures of three complexes 2, 3, and 4 have been determined. The absorption spectra, redox behavior, and luminescence properties of the complexes have been thoroughly investigated. All of the complexes display moderately strong luminescence at room temperature with lifetimes in the range of 10-55 ns. The effect of solvents on the absorption and emission spectral behavior of the complexes has also been studied in detail. The anion sensing properties of all the complexes have been studied in solution using absorption, emission, and (1)H NMR spectral studies and by cyclic voltammetric (CV) measurements. It has been observed that the complexes 1, 3, and 4 act as sensors for F(-)only, whereas 2 acts as sensor for F(-), AcO(-), and to some extent for H(2)PO(4)(-). It is evident that in the presence of excess of anions deprotonation of the imidazole N-H fragment(s) occurs in all cases, an event which is signaled by the development of vivid colors visible with the naked eye. The receptor-anion binding/equilibrium constants have been evaluated.     

Different Types of Nickel,Cobalt, and Manganese Complexes originating from 2‐Imidazolecarboxaldiimine of Triethylenetetraamine

The reactivity of the 2‐imidazolecarboxaldiimine of triethylenetetraamine (H2imida) towards divalent manganese, cobalt, and nickel ions differs. It forms a cationic nickel(II) complex by acting as a hexa‐dentate ligand, whereas the cobalt(II) complex formation took place by deprotonation of the H2imida forming a neutral complex with imida. Deprotonation of the ligand by H2imida by cobalt(II) ions caused quenching of the fluorescence emission at 312 nm, such a quenching effect was not observed with the nickel ions. On the other hand, a mononuclear manganese(II) complex of a new tetradentate ligand was formed by manganese(II) assisted intramolecular cyclization reactions of H2imida.     

Effect of seeded substrates on hydrothermally grown ZnO nanorods

We report a study on the effect of seeding on glass substrates with zinc oxide nanocrystallites towards the hydrothermal growth of ZnO nanorods from a zinc nitrate hexahydrate and hexamethylenetetramine solution at 95 °C. The seeding was done with pre-synthesized ZnO nanoparticles in isopropanol with diameters of about 6–7 nm as well as the direct growth of ZnO nanocrystallites on the substrates by the hydrolysis of pre-deposited zinc acetate film. The nanorods grown on ZnO nanoparticle seeds show uniform dimensions throughout the substrate but were not homogenously aligned vertically from the substrate and appeared like nanoflowers with nanorod petals. Nanorods grown from the crystallites formed in situ on the substrates displayed wide variations in dimension depending upon the preheating and annealing conditions. Annealing the seed crystals below 350 °C led to scattered growth directions whereupon preferential orientation of the nanorods perpendicular to the substrates was observed. High surface to volume ratio which is vital for gas sensing applications can be achieved by this simple hydrothermal growth of nanorods and the rod height and rod morphology can be controlled through the growth parameters.     

Stereospecific Formal [3+2] Dipolar Cycloaddition of Cyclopropanes with Nitrosoarenes: An Approach to Isoxazolidines

The MgBr₂‐catalyzed formal [3+2] cycloaddition of donor–acceptor activated cyclopropanes with nitrosoarenes offers a novel approach to various structurally diverse isoxazolidines. The reactions, which are experimentally easy to conduct, occur with complete stereospecificity and perfect control of regioselectivity. Product isoxazolidines can be readily transformed into α‐amino lactones by reductive or decarboxylative N? O cleavage and subsequent lactonisation, and the N‐aryl bond cleavage is also possible under oxidative conditions.     

Application of negative ion MS/MS to the identification of N-glycans released from carcinoembryonic antigen cell adhesion molecule 1 (CEACAM1)

Structures of N-glycans released from rat CEACAM1 expressed in human embryonic kidney cells were determined by MALDI and negative ion nanospray MS/MS techniques. The major carbohydrates were bi-, tri- and tetra-antennary complex glycans with and without sialic acid, fucose and bisecting GlcNAc residues. High-mannose glycans, predominantly Man(5)GlcNAc(2), were also found. The negative ion fragmentation technique easily identified the branching pattern of the triantennary glycans (mainly branched on the 6-antenna) and the presence of 'bisecting' GlcNAc residues (attached to the 4-position of the core mannose), features that are difficult to determine by traditional techniques. Sialic acids were in both alpha2-3 and alpha2-6 linkage as determined by MALDI-TOF MS following linkage-specific derivatization.