Adsorption of water on JSC‐1A (simulated moon dust samples)—a surface science study

JSC‐1a (a simulated lunar dust sample) supported on a silica wafer (SiO₂/Si(111)) has been characterized by scanning electron microscopy (SEM), energy dispersive x‐ray (EDX) spectroscopy, and Auger electron spectroscopy (AES). The adsorption kinetics of water has been studied primarily by thermal desorption spectroscopy (TDS) and in addition by collecting isothermal adsorption transients. Blind experiments on the silica support have been performed as well. JSC‐1a consists mostly of aluminosilicate glass and other minerals containing Fe, Na, Ca, and Mg, as characterized in detail in prior studies, for example, at NASA. The particle sizes span the range from a few micrometers up to 100 µm. At small exposures, H₂O TDS is characterized by broad (100–450) K structures; at large exposures, distinct TDS peaks emerge, which are assigned to amorphous solid water (ASW) (145 K) and crystalline ice (CI) (165 K). Water dissociates on JSC‐1a at small exposures but not on the bare silica support. Coadsorption TDS data (alkane–water mixtures) indicate that rather porous condensed ice layers form at large exposures, with the mineral particles acting most likely as nucleation sites. At thermal impact energies, the initial adsorption probability amounts to 0.92 ± 0.05. It is evident that the drop‐and‐dry technique, developed in studies about nanoparticles/tubes, can be extended to obtain samples for surface science studies based on powders consisting of particles with rather large diameters. Copyright © 2008 John Wiley & Sons, Ltd.     

Thio acid-mediated conversion of azides to amides – Exploratory studies en route to oroidin alkaloids

The utility of the thio acid-azide coupling reaction to afford amides is explored in imidazole-containing substrates for application in the total synthesis of examples of oroidin alkaloids. Good yields of the expected amides are obtained in both monomeric and dimeric substrates. Bis azides react preferentially at the 2-azido position but hydrosulfenylation and reduction interfere. 2-Thiophenyl and 2-oxo groups were evaluated as 2-amino surrogates, the thioether delivered the expected amide, whereas 2-imidazolone gave a mixture of the expected amide and the hydrosulfenylation product.     

Some bounds for integrals with refinements of the Grüss inequality

Some integral bounds are obtained which provide refinements and extensions of the Grüss type inequalities. We also get an alternative formulation of the Grüss inequality.     

The kernel theorem for Cauchy ultradistribution

Kernel theorems for spaces of Cauchy ultradistribution, supported by an n-dimensional tube and cone of the product type, are investigated.     

Effect of nanoclay and barium sulfate nanoparticles on the thermal and morphological properties of polyvinylidene fluoride nanocomposites

The thermal, morphological and optical studies of BaSO₄ and MMT (nanoclay) embedded in PVDF were investigated. Nanocomposites samples of PVDF–BaSO₄–MMT were prepared by varying the loadings (1–4 mass%) in case of BaSO₄ and MMT nanomaterials, respectively. Polyvinylidene fluoride–barium sulfate-montmorillonite (PVDF–BaSO₄–MMT) nanocomposites were prepared by solvent-mixing technique. Nanoparticles were synthesized by in situ deposition technique with the help of nonionic polymeric surfactant, and the particle size of nanoparticles was recognized by scanning electron microscopy (SEM) analysis which confirms that the particle has diameter of 80–90 nm. As prepared, nanocomposites films (thickness, 25 μm) were characterized by Fourier transform infrared microscopy (FTIR), SEM and electron diffraction spectroscopy (EDS). FTIR shows that all the chemical constituents were present in the nanocomposites, whereas SEM analysis suggested that the nanofillers dispersed well in polymer matrix and EDS showed the elemental composition of nanocomposite samples. Thermal properties of nanocomposites were studied by using TG/DTA/DTG. TG/DTA studies showed decomposition temperature of pure PVDF is 473.5 °C. The decomposition temperature (T _d) of nanocomposites was increased by 93 °C in case of nanocomposites with addition of both BaSO₄ and MMT nanomaterials. The difference in the thermal degradation temperature was found to be 1.2% higher in case of addition of BaSO₄ nanoparticle as compared to nanoclay. The obtained transparent nanocomposite films were characterized by using UV–Vis spectrophotometer which shows that transparencies of nanocomposites are maintained in visible region, the intensity of absorption band in UV region is increased with the addition of BaSO₄ nanoparticles, while in case of addition of nanoclay the UV region does not show drastic changes. Addition of both nanoparticle and nanoclay shows higher absorption in comparison with the individual samples. But further, doubling the amount of nanoparticle and nanoclay shows decrease in UV absorption. Overall, the results of thermal studies show that the incorporation of BaSO₄ and MMT could significantly improve the thermal properties of nanocomposites.     

A unified theory of thermoviscoplasticity of crystalline solids

A unified theory of thermoviscoplasticity of crystalline solids is presented. In particular it is shown that a thermodynamics for ‘viscoplastic’ materials can be accommodated within the framework of modern mechanics of materials with memory. The basic physical concepts are derived from the consideration of dislocation behaviour of crystalline solids. Relationships of the present approach to several of the existing theories of plasticity are examined.     

A Facile Diversity‐Oriented Multicomponent One‐Pot Synthesis of 3‐Amino‐6,7‐dihydrobenzo[c]thiophen‐4(5H)‐one Derivatives from α‐Oxo‐N,S‐ketene Acetal

A convenient one‐pot multicomponent method for the preparation of 3‐amino‐6,7‐dihydrobenzo[c]thiophen‐4(5H)‐one derivative has been developed. Reaction of 1,3‐cyclohexanedione and phenyl isothiocynate gave α‐oxo‐N,S‐ketene acetal that were reacted in situ with 2‐chloromethylquniazoline‐4‐one derivatives, in the presence of sodium hydride to afford the target compound in reasonable overall yields.