Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

从蓖麻油制取10-羟基癸酸的研究

本文报道了从蓖麻油制取10-羟基癸酸的研究,发现了从蓖麻油制取10-羟基癸酸的新的工艺路线和最佳的工艺条件,用氢氧化钠用量、2-辛醇量、反应时间和反应温度四因子三水平L_9(3~4)进行了正交试验,发现最佳工艺条件是:氢氧化钠(g)/蓖麻油(g):1.25:2-辛醇量(g)/蓖麻油(g):2:反应时间:6h;反应温度:180℃。在这一新的工艺路线和最佳工艺条件下,10-羟基癸酸产率可达75％。     

Decomposition of Transformer Oil Under Ultrasonic Irradiation During Degassing Process

In the degassing process of transformer oil with ultrasonic waves ,decompostition of the oil was observed.Light hydrocarbons,including methane,ethane,ethylene ,aceylene,propane etc,were found to be released continuously from the oil into headspace within a closed vial placed in an ultrasonic field ,The gases came from decomposition of hydrocarbon molecules under cavitation effect.     

(NiV13O38)7-的电子结构和催化性质的探讨

使用SCC－DV－Xα方法研究了高钒杂多化合物（NiV13O38）7-的电子结构，并探讨了它的催化性质·结果表明，（NiV13O38）7-是一种比Keggin结构更强的催化剂。分析了该阴离子中的键的强弱关系，认为配位数越少的氧与V形成的键越强．并分析了前线轨道HOMO，LUMO的组成，从而得出它的催化活性中心是Ni，V、一配位端氧，二、三配位桥氧，五配位中心氧的结论。     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

Phase Diagram and Properties of Glasses of the System Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-AgI

The phase diagram of the system Sb₂S₃-AgI was constructed from data of the differential thermal and X-ray phase analyses. The physicochemical properties of glassy and crystalline alloys were studied.     

A Kinetic Evidence for the Nitroxyl Radicals Recycling Mechanism in the Photostabilizing Process of HALS

The photoinduced bulk polymerization of a reactive-hindered amine fight stabilizers(r-HALS), 4-acryloyl-2, 2, 6, 6-tetramethylpiperidinyl (ATMP), was performed at 80℃ by using a DPC technique. An unique periodic exponential attenuation-type oscillating curve was found when the polymerization was carried out in air, but this phenomenon was not found in nitrogen.It is supposed that this unique kinetic performance may be attributed to nitroxyl radicals that are produced in situ from the oxidation of ATMP. ATMP polymer with narrow polydispersity (d =1.03) can be obtained by photoinduced solution polymerization of ATMP. The signal detected in ESR may be assigned to the nitroxyl radicals in the matrix of ATMP polymer. Since this kind of recycling of nitroxyl radicals is well documented for the photostabilizing mechanism of HALS, the present results may serve as a kinetic evidence for this mechanism.     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.