Absolutely exponential stability of Lur’e distributed parameter control systems

In this work, absolutely exponential stability of Lur’e distributed parameter control systems with delayed state has been addressed. Delay-dependent sufficient conditions for the absolutely exponential stability in Hilbert spaces are established in terms of linear operator inequalities (LOIs). Finally, the wave equation is given to illustrate our result.     

Effect of water on electrodeposition behavior of zinc in a ChCl-urea-ZnO deep eutectic system

Journal of Solid State Electrochemistry - The effect of water on the electrodeposition behavior of zinc in ChCl-urea deep eutectic solvent containing ZnO (ChCl-urea-ZnO) was investigated through...     

The effect of gypsum on the hydration of alite–belite–ferrite phase system

Journal of Thermal Analysis and Calorimetry - Thermal analysis is a very effective method for the study of the hydration process of cement. This paper focuses on the interactions between the...     

Keggin Arsenomolybdate Based Hybrid Compound with Complementary Inorganic Double Helical Chains

A new Keggin arsenomolybdate based inorganic–organic hybrid compound containing complementary inorganic double helical chains, [Ag₂(pyttz)₃(H₂O)][HAsMo₁₂O₄₀]·H₂O (1), was successfully synthesized and characterized. Single crystal X-ray analysis reveals that compound 1 exhibits 3D supramolecular framework with (4³)(4⁴·6²)(4⁷·6¹⁰·8⁴) topology, in which the complementary double helical chains constructed by the left- and right-handed helical chains are found. In the crystal engineering point of view, the rich coordination atoms and conjugated heterocyclic rigid plane of pyttz organic ligand and the multiple twisted V-shaped coordination modes of Keggin POMs facilitate the formation of the inorganic helical structure. In addition, the title compound exhibits good photocatalytic degradation of methylene blue dye, and is very stable and easily separated from the catalytic system for reuse as well.     

热可逆共价交联氯化聚乙烯的制备和性能

以双环戊二烯二羧酸钾 [DCPD(COOK) 2 ]为交联剂 ,通过共混反应法制得了共价交联的氯化聚乙烯(CPE)热塑性弹性体 (TPE) ,研究了共混反应条件 (温度、时间及交联剂用量等 )对TPE物性的影响 .反应溶解性和IR测定数据证明 ,DCPD(COOK) 2 与CPE分子链上的活性氯反应形成共价酯键而交联 ;物性测定数据表明 ,交联CPE的主要力学性能接近CPE常规硫化胶 ,不同的是该交联聚合物具备可塑性 ,经反复加工三次后 ,其力学性能还略有提高     

质子化g-C3N4/β-SiC复合材料的制备及光催化降解茜素红性能

分别采用热解法和溶胶-凝胶-碳热还原法合成了石墨相氮化碳(g-C₃N₄)和纳米级碳化硅(β-SiC), 通过浸渍-热处理法将两者复合并通过浓盐酸质子化, 分别制备了g-C₃N₄/β-SiC和质子化g-C₃N₄/β-SiC(P-g-C₃N₄/β-SiC)复合光催化剂. 利用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 高分辨透射电子显微镜(HRTEM)、 傅里叶变换红外光谱(FTIR)、 X射线光电子能谱(XPS)、 紫外-可见漫反射光谱(UV-Vis-DRS)和光致发光光谱(PL)等对样品进行了表征. 结果表明, P-g-C₃N₄/β-SiC复合材料的比表面积增大, 光生电子-空穴对的复合几率降低, 光催化性能明显提高. 在光催化降解染料茜素红(ARS)研究中, 样品的可见光催化活性顺序为P-g-C₃N₄/β-SiC>g-C₃N₄/β-SiC>P-g-C₃N₄>g-C₃N₄>β-SiC. 其中P-g-C₃N₄/β-SiC在60 min内对ARS的降解效率高达99.9%, 符合准一阶动力学模型, 速率常数为0.0967 min ^-1, 且循环使用9次后, 光催化降解效率仍保持97.5%以上.     

1,10-邻菲啰啉衍生物钌配合物的合成、 表征及与DNA和BSA的相互作用

通过2-(4-吡啶)-咪唑[4,5-f]-1,10-邻菲啰啉(L₁)与[Ru(η⁶-cymene)(μ-Cl)Cl]₂反应合成了3种新型芳基钌配合物, 并利用新配体2-(4-咪唑基苯基)咪唑[4,5-f]-1,10-邻菲啰啉(L₂)与RuCl₃反应合成了配合物4. 利用核磁共振波谱、 质谱等对配合物进行了表征. 通过紫外光谱和圆二色谱研究了配合物在缓冲溶液中的稳定性及与CT-DNA的相互作用, 利用荧光光谱研究了配合物与牛血清蛋白的作用, 用乌氏黏度计测试了配合物对DNA黏度的影响, 并通过荧光光谱、 凝胶电泳研究了配合物4在不同pH条件下的荧光响应及与pBR322 DNA的作用. 结果表明, 配合物通过嵌入的方式与DNA作用, 并对DNA的二级结构产生影响; 配合物1~4均可与牛血清蛋白的一个位点发生相互作用并使其发生静态荧光猝灭. 配合物4在光照条件下有活性氧生成, 可以使pBR322 DNA断裂并在酸性溶液中荧光增强.     

Ultra‐low‐loading palladium nanoparticles stabilized on nanocrystalline Polyaniline (Pd@PANI): A efficient,green, and recyclable catalyst for the reduction of nitroarenes

Ultra‐low‐loading Pd@PANI nanocomposites (0.048 w.t% Pd) were synthesized via a method that combined interfacial polymerization and in situ composite with camphor sulfonic acid ((+)‐CSA) as a dopant. Transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, and X‐ray photoelectron spectroscopy (XPS) were performed to characterize the structures. It can be used as an efficient catalyst for the reduction of nitroarenes in aqueous solution by using a smaller amount of NaBH₄ (2.5 equiv.) at room temperature with high activity (TON = 3.4 × 10³), good stability (cycled eight times), as well as wide applicability (27 substrates). The catalyst also showed a marvelous activity in the gram‐level reaction (yield = 92%). UV–Visible spectrophotometry was used to investigate the reaction kinetics for the reduction of 4‐nitrophenol to 4‐aminophenol, and the results reconfirmed the excellent performance of the catalyst. The unique properties and superior performance of the prepared ultra‐low‐loading Pd@PANI nanocomposites lead it be an attractive alternative catalyst for conventional organic catalytic applications.     

Preparation and characterization of carbon nanotubes-polymer/CdSe hybrid nanocomposites through combining electrostatic adsorption and ATRP technique

This paper describes a new strategy through noncovalent functionalization of multi-walled carbon nanotubes (MWNTs) by a kind of new copolymer Polyethyleneimine-graft-Polyacrylonitrile for attaching CdSe nanoparticles onto the MWNTs to fabricate Carbon Nanotube/CdSe heterostructures. Polyethyleneimine (PEI), an amino-rich cationic polyelectrolyte, can interact with the MWNTs through electrostatic interaction. Then, CNT/PEI-g-PAN was successfully prepared by in situ atom transfer radical polymerization (ATRP), which did not introduce defects to the structure of CNTs. Thus, CdSe nanoparticles can be covalently coupled to functionalized carbon nanotubes (CNTs) in a uniform and controllable manner. Moreover, this method ensures good dispersion and high stability in any commonly used organic or inorganic solvent. In this manner, our strategy allows the attachment of various colloidal nanoparticles to CNTs, independent of their surface properties, i.e. hydrophilic or hydrophobic. TEM, XRD, EDS and FT-IR are all used to characterize the CNT/CdSe composite materials. In addition, the optical properties are investigated by UV–vis spectrum.     

温敏梳状嵌段共聚物对PS微球阻抗蛋白吸附作用的研究

采用可逆加成断裂链转移聚合(RAFT)方法和大分子单体技术,制备了温敏性聚N-异丙基丙烯酰胺(PNIPAM)-聚乙烯基吡咯烷酮(PVP)与PNIPAM-聚氧化乙烯(PEO)梳状嵌段共聚物,这些共聚物具有PVP或PEO支链.以溶菌酶为蛋白模型研究了所得共聚物对聚苯乙烯(PS)微球表面蛋白吸附的抑制作用.通过絮凝实验、激光散射法表观粒径测定、电泳迁移率测定及蛋白吸附量的定量数据比较了不同梳状结构的抗蛋白吸附效果.结果表明,预吸附梳状嵌段共聚物可有效阻抗蛋白吸附,亲水支链增加阻抗性能提高,即使环境温度高于PNIPAM的相转变温度也能阻抗蛋白吸附.透射电镜和共聚物胶体粒径测试表明,梳状嵌段共聚物阻抗蛋白吸附的机制是预吸附后PVP或PEO亲水支链在微球表面形成了阻隔层.通过PS微球的变温絮凝实验可评价预吸附聚合物的抗蛋白吸附性能,快速获得定性结果.