金属钯纳米颗粒/氮化钛复合材料对水中2,4-二氯苯酚的电催化氢化脱氯（英文）

随着社会经济的快速发展,含氯有机物,特别是含氯苯系物,在农业、化工和医药等领域的使用量逐年增多,而使用过程中不合理的排放和控制致使含氯苯系物对生态环境,特别是水体环境的污染日趋严重.含氯苯系物具有高致毒致癌性,易生物富集,且很难被完全降解矿化,已被国家环保局认定为优先控制污染物.常规的废水处理工艺,如吸附、氧化及生物降解等,效率不高,且具有二次污染风险.电催化氢化脱氯技术是一种新型特别针对废水中含氯有机污染物的处理工艺,是通过在阴极电解还原水,原位生成原子态氢,以进攻苯环上C.Cl键,通过C.Cl键断裂H原子取代,使含氯苯系物完全转化为苯系物,达到去毒去害化的目的,近年来越来越受到研究者的关注.在整个电催化氢化脱氯技术中,高效稳定的电催化剂合成是关键,决定着脱氯效率、脱氯动力学、产物选择性及能量的利用率.本文报道了一种简易、无需添加任何表面活性剂的湿式还原法制备金属钯/氮化钛(Pd/TiN)和金属钯/碳(Pd/C)复合材料.在该复合材料中,金属钯颗粒具有均一的纳米尺寸(约5.0 nm)和球状形貌,且均匀分布在TiN和C载体上.作为针对水体中代表性含氯苯系物2,4-二氯苯酚的电催化氢化脱氯反应催化剂,Pd/TiN所展现的活性和稳定性均优于TiN和Pd/C,这源于TiN载体的促进作用.当TiN与Pd复合时,相应形成的Pd-TiN界面可改变Pd表面的电子结构,进一步优化Pd产活性氢及其吸附活化2,4-二氯苯酚的性能,因而其催化氢化脱氯活性增加.阴极工作电压是该催化反应中一个重要操作参数,决定了电催化氢化脱氯的效率和最终产物的构成.实验表明,.0.80 V vs Ag/AgCl是最佳操作电压,此时2,4-二氯苯酚的电催化氢化脱氯效率最高,可达到93.27%,且可实现最大程度的2,4-二氯苯酚向苯酚转化.脱氯反应路径研究发现,在Pd/TiN催化剂上2,4-二氯苯酚脱氯反应路径为2,4-二氯苯酚→对位一氯苯酚,邻位一氯苯酚→苯酚,但Pd/TiN对邻位和对位的C.Cl键断裂基本没有选择性.本文提供了一种新的有效调控Pd材料电催化氢化脱氯性能的方法,可望用于其他氢化反应体系的高效催化剂的设计合成,同时可推动电催化氢化脱氯技术在环境污染修复中的应用.     

Co-N/m-C高效催化空气下醇直接氧化成酯

酯类在有机合成中作为基础材料广泛地应用于精细化学品, 农用化学品, 药物等的生产中. 传统生产酯的方法需要用到羧酸, 酸酐, 酰卤或酮类, 并经过多步反应完成. 往往会造成原材料的浪费, 并伴随副产物的产生. 因此用醇代替酸或其衍生物与另一种醇反应直接氧化酯化合成相应的酯具有很大的经济意义. 目前已有基于贵金属(如钌, 钯和金)的将醇类直接氧化为酯类的催化剂的研究, 但是贵金属的价格及其有限的资源限制了其在实际生产中的应用. 从经济发展和环境保护的角度出发, 开发基于非贵金属的用于醇氧化酯化的催化剂有重要意义.近年来, 碳材料由于成本低? 稳定性高? 电化学性能优异的特点而广泛应用于材料? 化学催化和电化学催化等领域. 此外, 杂原子和金属的引入可以在一定程度上调节材料的组成, 电子结构和表面物理化学性质而进一步构建新的活性位点, 增强碳材料的催化性能. 另外, 由于多孔碳材料具有较大的比表面积和多样的孔结构, 作为催化剂载体比普通碳材料更优越, 使得底物更容易接触活性部位, 同时提高氧的传输能力. 然而, 活性钴物种因在热解过程中容易发生团聚而使原子催化效率降低. 因此设计和制备高分散且高效的催化剂对于实现醇氧化为酯有重要意义.钴基氮掺杂碳材料是一种有潜力的能将醇直接氧化到酯的经济, 高效, 环保的催化剂. 本文提出了一种方便, 快捷, 高效的醇直接氧化成酯的方法, 即利用直接热解大分子前驱体制备钴改性N掺杂介孔碳材料(Co-N/m-C), 用于醇直接氧化成酯反应中, 其中以900 oC下焙烧所制的催化剂活性最高. 该催化剂对于苯甲醇直接有氧氧化成苯甲酸甲酯反应的TOF值高达107.6 h?1, 远高于目前所报道的过渡金属基纳米催化剂的, 这得益于超分散钴物种与材料中吡啶氮之间的强配位作用及大的介孔比表面积. 对于不同结构的醇, 包括苄基醇, 烯丙基醇和杂环醇, 也能高收率地得到相应酯, 说明该催化剂具有普适性. 另外, Co-N/m-C-900催化剂经循环使用六次后没有显著的活性损失, 表明了该催化剂具有一定的稳定性.     

Novel thioxanthone host material with thermally activated delayed fluorescence for reduced efficiency roll-off of phosphorescent OLEDs

A symmetrical host material, 2,7-di(9,9-dimethyl-9H-fluoren-1-yl)-9H-thioxanthen-9-one (DMBFTX), with TADF property was firstly developed. The red phosphorescent OLED based on this TADF host displays a lower EQEs rolloff of 38.8% at a luminance of 10 000 cd/m² as compared to 71.2% of commercial mCP host, which is resulted from the upconversion of DMBFTX from triplet to singlet.     

Flexible asymmetric supercapacitor based on MnO2 honeycomb structure

By controlling the electroplating time of solution containing Mn(Ac)₂, the MnO₂ nanosheets were self-assembled to the honeycomb structure and showed an excellent electrochemical performance in 1 mol/L Na₂SO₄ electrolyte. Via pairing with activated carbon as negative electrode, the capacitor could deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.     

MoB/g‐C3N4 Interface Materials as a Schottky Catalyst to Boost Hydrogen Evolution

Proton adsorption on metallic catalysts is a prerequisite for efficient hydrogen evolution reaction (HER). However, tuning proton adsorption without perturbing metallicity remains a challenge. A Schottky catalyst based on metal–semiconductor junction principles is presented. With metallic MoB, the introduction of n‐type semiconductive g‐C₃N₄ induces a vigorous charge transfer across the MoB/g‐C₃N₄ Schottky junction, and increases the local electron density in MoB surface, confirmed by multiple spectroscopic techniques. This Schottky catalyst exhibits a superior HER activity with a low Tafel slope of 46 mV dec^?1 and a high exchange current density of 17 μA cm^?2, which is far better than that of pristine MoB. First‐principle calculations reveal that the Schottky contact dramatically lowers the kinetic barriers of both proton adsorption and reduction coordinates, therefore benefiting surface hydrogen generation.     

Imaging of Colorectal Cancers Using Activatable Nanoprobes with Second Near‐Infrared Window Emission

Fluorescent probes in the second near‐infrared window (NIR‐II) allow high‐resolution bioimaging with deep‐tissue penetration. However, existing NIR‐II materials often have poor signal‐to‐background ratios because of the lack of target specificity. Herein, an activatable NIR‐II nanoprobe for visualizing colorectal cancers was devised. This designed probe displays H₂S‐activated ratiometric fluorescence and light‐up NIR‐II emission at 900–1300 nm. By using this activatable and target specific probe for deep‐tissue imaging of H₂S‐rich colon cancer cells, accurate identification of colorectal tumors in animal models were performed. It is anticipated that the development of activatable NIR‐II probes will find widespread applications in biological and clinical systems.     

One-pot synthesis of [1,2,4]Triazolo[1,5-a]pyridines from azines and benzylidenemalononitriles via copper-catalyzed tandem cyclization

A simple and efficient copper-catalyzed tandem radical cyclization reaction has been discovered for the synthesis of triaryl [1,2,4]triazolo[1,5-a]pyridines from easily accessible azines and benzylidenmalononitriles. The new transformation involves multiple CH/CC bonds cleavage and CC/CN bonds formation, with extrusion of gaseous hydrogen and methane. A wide variety of substrates with different functional groups could be converted into the corresponding products in good yields. The fused heterocycles have strong blue fluorescence with large Strokes shifts and high quantum yields.     

Practical way for the synthesis of 3,3′-bis-substituted benzo[d][1,2]oxaphosphole 2-oxides by phosphonylation of in situ generated o-quinone methides

Phosphonylation of the pretreated 2-(hydroxymethyl)phenol derivatives with acetic anhydride using trialkylphosphites as the nucleophilic reagents was reported, providing a practical way to the synthesis of novel highly steric 3,3′-bis-substituted benzo[d][1,2]oxaphosphole 2-oxides.     

Rhodium-catalyzed NH-indole-directed ortho CH coupling of 2-arylindoles with diazo compounds via metal carbene migratory insertion

A high regioselective rhodium-catalyzed ortho CH coupling of 2-arylindoles with diazo compounds via NH-indole-directed CH bond activation has been developed. The catalytic reaction features mild reaction conditions, broad substrate scope and good functional group tolerability.     

煤气化可弃型催化剂

煤的高效催化气化技术是提高煤气化效率的重要途径。目前,除CaCO₃以外,其他碱金属、碱土金属与过渡金属类催化剂都由于成本较高、回收困难等问题并未广泛应用。可弃型催化剂具有廉价、不必回收、环保并兼有调节灰熔特性、固硫等优点,近年来在煤气化领域的研究和应用受到广泛关注。本文综述了国内外几类可弃型催化剂在煤气化领域的研究进展,包括钙基、工业废液、废渣和生物质灰等催化剂的催化特性及其机理,讨论了在实际应用中存在的问题,展望了未来煤气化可弃型催化剂的发展前景。