Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Thermoresponsive shuttling of rotaxane containing trichloroacetate ion

A thermoresponsive rotaxane shuttling system was developed with a trichloroacetate counteranion of an ammonium/crown ether-type rotaxane. Chemoselective thermal decomposition of the ammonium trichloroacetate moiety on the rotaxane yielded the corresponding nonionic rotaxane accompanied by a positional change of the crown ether on the axle. The rotaxane skeleton facilitated effective dissociation of the acid, markedly lowering the thermal decomposition temperature.     

Detection of oxygen addition peaks for terpendole E and related indole–diterpene alkaloids in a positive‐mode ESI‐MS

This report describes that a regular positive electrospray ionization mass spectrometry (MS) analysis of terpendoles often causes unexpected oxygen additions to form [M + H + O]⁺ and [M + H + 2O]⁺, which might be a troublesome in the characterization of new natural analogues. The intensities of [M + H + O]⁺ and [M + H + 2O]⁺ among terpendoles were unpredictable and fluctuated largely. Simple electrochemical oxidation in electrospray ionization was insufficient to explain the phenomenon. So we studied factors to form [M + H + O]⁺ and [M + H + 2O]⁺ using terpendole E and natural terpendoles together with some model indole alkaloids. Similar oxygen addition was observed for 1,2,3,4‐tetrahydrocyclopent[b]indole, which is corresponding to the substructure of terpendole E. In tandem MS experiments, a major fragment ion at m/z 130 from protonated terpendole E was assigned to the substructure containing indole. When the [M + H + O]⁺ was selected as a precursor ion, the ion shifted to m/z 146. The same 16 Da shift of fragments was also observed for 1,2,3,4‐tetrahydrocyclopent[b]indole, indicating that the oxygen addition of terpendole E took place at the indole portion. However, the oxygen addition was absent for some terpendoles, even whose structure resembles terpendole E. The breakdown curves characterized the tandem MS features of terpendoles. Preferential dissociation into m/z 130 suggested the protonation tendency at the indole site. Terpendoles that are preferentially protonated at indole tend to form oxygen addition peaks, suggesting that the protonation feature contributes to the oxygen additions in some degrees. © 2014 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

A simple high‐performance liquid chromatography for the determination of linezolid in human plasma and saliva

Linezolid is an antimicrobial agent for the treatment of multiresistant Gram‐positive infections. A practical high‐performance liquid chromatography method was developed for the determination of linezolid in human plasma and saliva. Linezolid and an internal standard (o‐ethoxybenzamide) were extracted from plasma and saliva with ethyl acetate and analyzed on a Capcell Pak C₁₈ MG column with UV detection at 254 nm. The calibration curve was linear through the range 0.5–50 µg/mL using a 200 μL sample volume. The intra‐ and interday precisions were all <6.44% for plasma and 5.60% for saliva. The accuracies ranged from 98.8 to 110% for both matrices. The mean recoveries of linezolid were 80.8% for plasma and 79.0% for saliva. This method was used to determine the plasma and saliva concentrations of linezolid in healthy volunteers who were orally administered a 600 mg dose of linezolid. Our liquid–liquid extraction procedure is easy and requires a small volume of plasma or saliva (200 μL). This small volume can be advantageous in clinical pharmacokinetic studies, especially if children participate. Copyright © 2015 John Wiley & Sons, Ltd.     

Algorithm for in vitro Sun Protection Factor based on transmission spectrum measurement with concomitant evaluation of photostability

In the in vitro evaluation of Sun Protection Factor (SPF), the photostability of the ultraviolet (UV) filters can have a major impact, especially for high-SPF formulations, but is generally not taken into consideration. In this study, we present a UV transmission spectrum measurement system utilizing a high-sensitivity UV photomultiplier tube with concomitant evaluation of photostability. We have developed an algorithm to estimate SPF in vitro by converting the amount of UV light transmission through the sunscreen layer into cumulative relative erythema effectiveness to obtain one minimal erythema dose. Thus, the algorithm uses the same endpoint as in vivo SPF methods, but with a photomultiplier tube as the detector instead of skin. The values obtained showed an excellent correlation with in vivo SPF values, even for high-SPF sunscreens exceeding SPF 50. This method should be suitable as an in vitro SPF testing method for regulatory purposes.     

Very strong hydrogen bonds in a bent chain structure of fluorohydrogenate anions in liquid Cs(FH)2.3F

The structure of liquid Cs(FH)(2.3)F was revealed using a combination of high-energy x-ray and neutron diffraction measurements. We found that the strongest intermolecular H-F hydrogen bonds at an average distance of 1.36 A are accompanied by the formation of a high degree of bending of the oligomer chain in the melt, with [angle]FHF=150 degrees . A reverse Monte Carlo simulation showed that the average number of atoms per chain is 4.4. A detailed chain analysis of the atomic configuration revealed that (FH)(2)F(-) oligomer chains are the major entities in the liquid, and asymmetrical FHF(-) are formed owing to the strong H-F hydrogen bonds. The results suggest that an average of one or two HF molecules bond to each of the 11 fluorine atoms surrounding a cesium ion.     

Amphiphilic molecular design as a rational strategy for tailoring bicontinuous electron donor and acceptor arrays: photoconductive liquid crystalline oligothiophene--C60 dyads

For tailoring solution-processable optoelectronic thin films, a rational strategy with amphiphilic molecular design is proposed. A donor-acceptor dyad consisting of an oligothiophene and C60, when modified with a hydrophilic wedge on one side and a paraffinic wedge on the other (1Amphi), forms over a wide temperature range a photoconducting smectic A liquid crystal having bicontinuous arrays of densely packed donor and acceptor units. In contrast, when modified with only paraffinic wedges (1Lipo), the dyad forms a smectic A liquid crystalline mesophase, which however is poorly conductive. As indicated by an absorption spectral feature along with a synchrotron radiation small-angle X-ray scattering profile, 1Lipo in the lamellar structure does not adopt a uniform head/tail orientation. Such defective donor and acceptor arrays likely contain a large number of trapping sites, leading to short-lived charge carriers, as observed by a flash photolysis time-resolved microwave conductivity study.     

Prominent electron transport property observed for triply fused metalloporphyrin dimer: directed columnar liquid crystalline assembly by amphiphilic molecular design

A triply fused copper porphyrin dimer, when site-specifically modified on its periphery with hydrophobic and hydrophilic wedges (1C12/TEG), self-assembles into a columnar liquid crystalline (LC) mesophase over a wide-temperature range from -17 to 99 degrees C but gives rise to an amorphous solid when modified with only hydrophobic (1C12/C12) or hydrophilic wedges (1TEG/TEG). A LC film of 1C12/TEG displays at 16 degrees C a top-class one-dimensional electron mobility (0.27 cm2/V x s), as evaluated from its maximum flash-photolysis time-resolved microwave conductivity.     

Macrocyclic Metal Complexes Bearing Rigid Polyaromatic Ligands: Synthesis and Catalytic Activity

We synthesised palladium and platinum complexes possessing cyclic and acyclic pincer‐type polyaromatic ligands and investigated their structural effect on the catalysis. The pincer‐type bis(6‐arylpyridin‐2‐yl)benzene skeleton was constructed via Kröhnke pyridine synthesis under transition metal‐free conditions on gram‐scale quantity. Ligand structure significantly influenced catalytic activity toward the platinum‐catalysed hydrosilylation of diphenyl acetylenes, despite the ligand‐independence of the conformations and electronic properties of these complexes.