Accelerating and decelerating effects of metal ions on electron-transfer reduction of quinones as a function of temperature and binding modes of metal ions to semiquinone radical anions

The accelerating effect of Sc(3+) on the electron-transfer (ET) reduction of the p-benzoquinone derivative 1-(p-tolylsulfinyl)-2,5-benzoquinone (TolSQ) by 10,10'-dimethyl-9,9'-biacridine ((AcrH)(2)) at 233 K changes to a decelerating effect with increasing reaction temperature; the observed second-order rate constant k(et) decreases with increasing Sc(3+) concentration at high concentrations of Sc(3+) at 298 K. At 263 K the k(et) value remains constant with increasing Sc(3+) concentration. Such a remarkable difference with regard to dependence of k(et) on [Sc(3+)] between low and high temperatures results from the difference in relative activity of two ET pathways that depend on temperature, one of which affords 1:1 complex TolSQ*(-)-Sc(3+), and the other 1:2 complex TolSQ*(-)-(Sc(3+))(2) with additional binding of Sc(3+) to TolSQ*(-)-Sc(3+). The formation of TolSQ*(-)-Sc(3+) and TolSQ*(-)-(Sc(3+))(2) complexes was confirmed by EPR spectroscopy in the ET reduction of TolSQ in the presence of low and high concentrations of Sc(3+), respectively. The effects of metal ions on other ET reactions of quinones to afford 1:1 and 1:2 complexes between semiquinone radical anions and metal ions are also reported. The ET pathway affording the 1:2 complexes has smaller activation enthalpies DeltaH( not equal) and more negative activation entropies DeltaS( not equal) because of stronger binding of metal ions and more restricted geometries of the ET transition states as compared with the ET pathway to afford the 1:1 complexes.     

One-step versus stepwise mechanism in protonated amino acid-promoted electron-transfer reduction of a quinone by electron donors and two-electron reduction by a dihydronicotinamide adenine dinucleotide analogue. Interplay between electron transfer and hydrogen bonding

Semiquinone radical anion of 1-(p-tolylsulfinyl)-2,5-benzoquinone (TolSQ(*-)) forms a strong hydrogen bond with protonated histidine (TolSQ(*-)/His x 2 H(+)), which was successfully detected by electron spin resonance. Strong hydrogen bonding between TolSQ(*-) and His x 2 H(+) results in acceleration of electron transfer (ET) from ferrocenes [R2Fc, R = C5H5, C5H4(n-Bu), C5H4Me] to TolSQ, when the one-electron reduction potential of TolSQ is largely shifted to the positive direction in the presence of His x 2 H(+). The rates of His x 2 H(+)-promoted ET from R2Fc to TolSQ exhibit deuterium kinetic isotope effects due to partial dissociation of the N-H bond in His x 2 H(+) at the transition state, when His x 2 H(+) is replaced by the deuterated compound (His x 2 D(+)-d6). The observed deuterium kinetic isotope effect (kH/kD) decreases continuously with increasing the driving force of ET to approach kH/kD = 1.0. On the other hand, His x 2 H(+) also promotes a hydride reduction of TolSQ by an NADH analogue, 9,10-dihydro-10-methylacridine (AcrH2). The hydride reduction proceeds via the one-step hydride-transfer pathway. In such a case, a large deuterium kinetic isotope effect is observed in the rate of the hydride transfer, when AcrH2 is replaced by the dideuterated compound (AcrD2). In sharp contrast to this, no deuterium kinetic isotope effect is observed, when His x 2 H(+) is replaced by His x 2 D(+)-d6. On the other hand, direct protonation of TolSQ and 9,10-phenanthrenequinone (PQ) also results in efficient reductions of TolSQH(+) and PQH(+) by AcrH2, respectively. In this case, however, the hydride-transfer reactions occur via the ET pathway, that is, ET from AcrH2 to TolSQH(+) and PQH(+) occurs in preference to direct hydride transfer from AcrH2 to TolSQH(+) and PQH(+), respectively. The AcrH2(*+) produced by the ET oxidation of AcrH2 by TolSQH(+) and PQH(+) was directly detected by using a stopped-flow technique.     

One-electron reduction of methanesulfonyl chloride. The fate of MeSO2Cl(.)(-) and MeSO2(.) intermediates in oxygenated solutions and their role in the cis-trans isomerization of mono-unsaturated fatty acids

The one-electron reduction of methanesulfonyl chloride (MeSO2Cl) leads, in the first instance, to an electron adduct MeSO2Cl(.)(-) which lives long enough for direct detection and decays into sulfonyl radicals MeSO2(.) and Cl(-), with k = 1.5 x 10(6) s(-1). Both, MeSO2Cl(.)(-) and MeSO2(.) showed a similar absorption in the UV with lambdamax of 320 nm. In the presence of oxygen, MeSO2Cl(.)(-) transfers an electron to O(2) and establishes an equilibrium with superoxide. The rate constant for the forward reaction was measured to 4.1 x 10(9) M(-1) s(-1), while for the back reaction only an interval of 1.7 x 10(5) to 1.7 x 10(6) M(-1) s(-1) could be estimated, with a somewhat higher degree of confidence for the lower value. This corresponds to an equilibrium constant in the range of 2.4 x 10(3) to 2.4 x 10(4). With reference to E degrees (O2/O2(.)(-)) = -155 mV, the redox potential of the sulfonyl chloride couple, E degrees (MeSO2Cl/MeSO2Cl(.)(-)), thus results between being equal to -355 and -414 mV (vs NHE). MeSO2Cl(.)(-) reduces (besides O2) 4-nitroacetophenone. The underlying electron transfer took place with k = 1.5 x 10(9) M(-1) s(-1), corroborating an E degrees for the sulfonyl chloride couple significantly exceeding the above listed lower value. The MeSO2(.) radical added to oxygen with a rate constant of 1.1 x 10(9) M(-1) s(-1). Re-dissociation of O2 from MeSO2OO(.) occurred only very slowly, if at all, that is, with k < 10(5) s(-1). MeSO2(.) radicals can act as the catalyst for the cis-trans isomerization of several Z- and E-mono-unsaturated fatty acid methyl esters in homogeneous solution. The effectiveness of the isomerization processes has been addressed, and in the presence of oxygen the isomerization is completely suppressed.     

Crystallization-driven constitutional changes of dynamic polymers in response to neat/solution conditions

Dynamic polymers (dynamers) based on reversible imine interactions were generated and found to respond to changes in neat/solution environment, thus displaying adaptive behavior through modification of their constitution in order to maximize the stability of their mesoscopic state as a function of conditions.     

Iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides for synthesis of α-tertiary amines

A protocol for the synthesis of α-tertiary amines was developed by iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides. Nucleophilic 1,2-addition of organolithium reagents to carboxamides forms anionic tetrahedral carbinolamine (hemiaminal) intermediates, which are subsequently treated with bromotrimethylsilane (Me₃SiBr) followed by organomagnesium (Grignard) reagents, organolithium reagents or tetrabutylammonium cyanide, affording α-tertiary amines. Employment of (trimethylsilyl)methylmagnesium bromide as the 2^nd nucleophile allowed for aza-Peterson olefination of the resulting α-tertiary (trimethylsilyl)methylamines with acidic work-up, resulting in the formation of 1,1-diarylethylenes.

We herein report a concise protocol for iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides for the synthesis of α-tertiary amines.     

Intramolecular Diels-Alder reaction of N-allyl 2-furoyl amides: effect of steric strain and amide rotational isomerism

Intramolecular Diels-Alder reactions of various N-allyl 2-furoyl amides with different substituents on the nitrogen atom were investigated. The reaction of amides having bulky substituents proceeded at a faster rate than the analogs whose substituents were of less bulkiness. From the systematic experimental survey of the substituent effects and the energetic evaluation based on the DFT calculations at the B3LYP/6-31G(d) level, the enhanced reactivity was ascribed to the relief of steric strain upon cyclization rather than the amide rotational isomerism governed by the bulky substituents.     

Ni-catalyzed [3+2+2] cycloaddition of ethyl cyclopropylideneacetate and 1,3-diynes. Application to the three-component cycloaddition

The Ni-catalyzed [3+2+2] cocyclization between ethyl cyclopropylideneacetate (1) and 1,3-diynes afforded cycloheptadiene derivatives. The three-component reaction of 1, 1,3-diynes, and alkynes proceeded with good yield and high selectivity. Scope of the substrates was studied, and the origin of chemo- and regioselectivity of the reaction is discussed.     

Selective photocatalytic oxidation of alcohols to aldehydes in water by TiO2 partially coated with WO3

Semiconductor TiO₂ particles loaded with WO₃ (WO₃/TiO₂), synthesized by impregnation of tungstic acid followed by calcination, were used for photocatalytic oxidation of alcohols in water with molecular oxygen under irradiation at λ>350 nm. The WO₃/TiO₂ catalysts promote selective oxidation of alcohols to aldehydes and show higher catalytic activity than pure TiO₂. In particular, a catalyst loading 7.6 wt % WO₃ led to higher aldehyde selectivity than previously reported photocatalytic systems. The high aldehyde selectivity arises because subsequent photocatalytic decomposition of the formed aldehyde is suppressed on the catalyst. The TiO₂ surface of the catalyst, which is active for oxidation, is partially coated by the WO₃ layer, which leads to a decrease in the amount of formed aldehyde adsorbed on the TiO₂ surface. This suppresses subsequent decomposition of the aldehyde on the TiO₂ surface and results in high aldehyde selectivity. The WO₃/TiO₂ catalyst can selectively oxidize various aromatic alcohols and is reusable without loss of catalytic activity or selectivity.     

Iridium-catalyzed enantioselective Pauson-Khand-type reaction of 1,6-enynes

Iridium-chiral diphosphine complex catalyzes an enantioselective intramolecular Pauson-Khand-type reaction to give various chiral bicyclic cyclopentenones. The enantioselective reaction proceeds more smoothly and enantioselectively under a lower partial pressure of carbon monoxide. Moreover, aldehyde can be used as a CO source in the enantioselective carbonylative coupling.