On-line purification for the determination of catecholamines by liquid chromatography

An on-line purification method for catecholamines was studied using a flow system equipped with an alumina microcolumn. The procedure involves catecholamine adsorption, column washing and catecholamine elution steps. The system is designed not to decompose catecholamines under alkaline conditions in the adsorption step. Flow-rates and times for different solutions delivered in each step (alkaline buffer for adsorption, water for washing and an acidic solution for elution), column length and sample volume to be loaded were systematically investigated by liquid chromatography. Under optimum conditions, norepinephrine, epinephrine, dopamine and 3,4- dihydroxybenzylamine (internal standard) can be purified with recoveries of ? 90% within 11 min with manual operation. This method was efficiently applied to urine samples and the results indicate the possibility that catecholamines in biological samples are automatically purified.     

Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.     

Photoinduced ionic polymerization. II. Cationic polymerization of α-methylstyrene in the presence of tetracyanobenzene

The dependence of the rate of polymerization on light intensity and the stereoregularity of the polymer was studied to elucidate the propagation and termination mechanisms of the photoinduced cationic polymerization of α-methylstyrene in the presence of tetracyanobenzene in methylene chloride. The rate of polymerization was proportional to the light intensity. The polymer is highly syndiotactic, and the stereoregularity is similar to that of polymers obtained by radiation-induced cationic polymerization. The initiation mechanism was also studied by electron spin resonance, by which the anion radical of tetracyanobenzene formed from a photoexcited complex between α-methylstyrene and tetracyanobenzene was observed. The cation radical of α-methylstyrene, counterpart of the anion radical, is believed to initiate the polymerization.     

Blood cell separation using crosslinkable copolymers containing N,N‐dimethylacrylamide

Amphiphilic copolymers using hydrophilic N,N‐dimethylacrylamide (DMA), hydrophobic methyl methacrylate (MMA) and a crosslinkable monomer, 3‐methacryloyloxypropyl trimethoxysilane (MTSi), were synthesized and evaluated as coating materials for leukocyte removal filters for whole blood. When filters composed of non‐woven fabrics were coated with crosslinked synthesized copolymers, the elution ratios of the copolymers to water were adequately low because of the crosslinking with trimethoxysilane groups of MTSi units in the copolymers. Filters coated with crosslinked poly(DMA‐co‐MTSi) having a 0.96 mole fraction of DMA units showed a 0.35 ± 0.44% platelet permeation ratio and a logarithmic reduction of 4.0 ± 0.68 for leukocytes. On the other hand, an increase in the content of MMA units in the DMA‐containing copolymers improved the permeation ratio of the platelets dramatically. Filters coated with crosslinked poly(DMA‐co‐MMA‐co‐MTSi) containing a 0.39 mole fraction of MMA units and a 0.58 mole fraction of DMA units showed an 86 ± 3.0% platelet permeation ratio and a logarithmic reduction of 2.1 ± 1.2 for leukocytes. This indicates that an adequate content of hydrophobic monomer units, such as MMA units, is necessary for effective platelet permeation. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of polymer as cosolvent on chemical reactions in solution—I. Effects of polystyrene and polyoxyethylene on the reaction of dansyl chloride with butylamine in organic solvents

The rates of reactions of 5-dimethylamino-1-naphthalenesulphonyl chloride (dansyl chloride) with butylamine in organic solvents have been measured in the presence of polymer such as polyoxyethylene (POE) or polystyrene (PS) as cosolvent and compared with those in the presence of cosolvents of low molecular weight analogues, viz. diethyloxyethane (DEE) and toluene (Tol.). Acceleration by cosolvent POE, compared with DEE, increases with increasing volume fraction of cosolvent and the effect depends on the degree of polymerization of the polymer cosolvent. Similarly, addition of cosolvent PS to ethyl acetate or chloroform results in increase in the reaction rate as compared with cosolvent Tol. The effect by PS also showed dependence on the degree of polymerization. The effect of polymer cosolvent on chemical reactions between two low molecular weight species is explained in terms of the thermodynamics of polymer solutions.     

C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

Enantioselective copper-catalyzed 1,4-addition of dialkylzincs to enones using a novel N,N,P–Cu(II) complex

Enantioselective copper-catalyzed 1,4-additions of dialkylzincs to enones were carried out in the presence of 1 mol % of Cu(OTf)₂ and 2.5 mol % of an N,N,P-ligand possessing a tert-butyl group at the adjacent position of the nitrogen of pyridine to afford the corresponding 1,4-adducts in up to 98% ee.     

Direct Cyclopropanation of α-Cyano β-Aryl Alkanes by Light-Mediated Single Electron Transfer Between Donor–Acceptor Pairs

Cyclopropanes are traditionally prepared by the formal [2+1] addition of carbene or radical based C1 units to alkenes. In contrast, the one-pot intermolecular cyclopropanation of alkanes by redox active C1 units has remained unrealised. Herein, we achieved this process simply by exposing β-aryl propionitriles and C1 radical precursors (N-oxy esters) to base and blue light. The overall process is redox-neutral and a photocatalyst, whether metal- or organic-based, is not required. Our findings support that single electron transfer (SET) from the α-cyano carbanion of the propionitrile to the N-oxy ester is facilitated by blue-light via their electron donor–acceptor (EDA) complex. The α-cyano carbon radical thus formed can then lose a β-proton to form a π-resonance stabilised radical anion that preferentially couples at the benzylic β-position with a decarboxylated C1 radical unit. This new transition metal-free chemistry tolerates both electron rich and electron deficient (hetero)aryl systems, even sulfide or alkene functionality, to afford a range of cis-aryl/cyano cyclopropanes bearing congested tetrasubstituted quaternary carbons.