Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Photoelectron spectra and angular distribution in reson three-photon ionization of atomic iron: J dependence

Kenetic energies and angular distributions of photoelectrons emitted by three-photon ionization fo atomic iron through two-photon resonant state e⁷D_J and e⁵ D_J, were measured, by using visible lasers. J-resolved photoelectron bands attributab to the a⁶D_J and a⁴F_j ionic states are reported.     

Preparation of Saccharide-Silica Composites by a Sol-Gel Method and the Application for Optical Resolution of Metal Chelate Compounds

A novel organic-inorganic composite was prepared by a sol-gel process using hydrolysis and condensation of tetraethoxysilane (TEOS) reacted with a saccharide. During the process, ethoxy groups of the TEOS were replaced with hydroxyl groups of the saccharide and, consequently, saccharide molecules were combined with silica through their hydroxyl groups. Samples obtained under different reaction conditions were used for optical resolution of a metal chelate compound. The resolution ability of the composites was affected by the amount of water added for hydrolysis and of the saccharide. In particular, the amount of water drastically influenced the optical resolution performance. Composites obtained at the lower H2O/TEOS ratio gave the metal chelate compound a higher optical rotation. Three types of composites with the same composition were prepared by kneading, impregnation and by the sol-gel method, and were compared. The sol-gel composite showed the best optical resolution ability. It was concluded that the optical resolution ability was closely related to dispersibility of saccharide in the silica matrix.     

Scalar auxiliary variable approach for conservative/dissipative partial differential equations with unbounded energy functionals

BIT Numerical Mathematics - In this paper, we present a novel investigation of the so-called SAV approach, which is a framework to construct linearly implicit geometric numerical integrators for...     

Stochastic phase lockings in a relaxation oscillator forced by a periodic input with additive noise: A first-passage-time approach

Noise effects on phase lockings in a system consisting of a piecewise-linear van der Pol relaxation oscillator driven by a periodic input are studied. The problem of finding the period of the oscillator is reduced to the first-passage-time problem of the Ornstein-Uhlenbeck process with time-varying boundary. The probability density functions of the first-passage time are used to define the operator which governs a transition of an input phase density after one cycle of the oscillator. Phase lockings in a stochastic sense are investigated on the basis of the density evolution by the operator.     

Hybrid optical resonator type laser proposed for direct coupling into optical fiber

Combining one stable resonator with a concave mirror and a coupling-hole plane mirror, and another unstable resonator having a concave mirror and a convex mirror, a new hybrid optical resonator type laser has been proposed by overlapping the concave mirror as a common one and fitting the convex mirror exactly to the coupling-hole. Using theABCD law, the so-called g-parameters are first found for beam confinement. Then, based on the eigen-equation, the field distribution on the plano-convex mirror is obtained with the g-parameters above. Knowing this field distribution results in an effective transmittanceG _{e e}. Finally, the ratio of the inner convex to outer plane mirror radii can be determined for an optimum coupling in both the limiting cases of homogeneously and inhomogeneously broadened gain media. Some numerical examples will also be given for a CO₂ laser having the proposed hybrid resonator.     

Crystal and molecular structure of 6-0-acetylgrayanotoxin III

The crystal and molecular structure of a grayanotoxin III derivative, 6-0-acetylgrayanotoxin III is presented. The crystal is orthorhombic, space group P2₁2₁2₁, witha=15.582(3),b=21.304(3),c=6.339(3)Å,V=2104(1) ų Z=4. The structure was solved by direct methods and refined by full matrix least-squares methods to a finalR=0.047 for 1763 independent reflections withF ₀>3 (F ₀) The molecule is based on a tetracyclic structure consisting of two five-membered, one six-membered, and one seven-membered ring with various conformations.