Extraction of uranium (VI), plutonium (IV) and some fission products by tri-iso-amyl phosphate

The extractive properties of tri-isoamyl-phosphate (TAP), an indigenously prepared extractant, and the loading capacity of extraction solvent containing TAP for U(VI) and Pu(IV) ions in nitric solution have been investigated. The dependence of the distribution ratio on the concentration of nitric acid showed that TAP has an ability to extract these actinides, while the fission product contaminants are poorly extracted. The distribution data revealed a quantitative extraction of both U(VI) and Pu(IV) from moderate nitric acidities in the range 2–7 mol · dm^–3. Slope analysis proved predominant formation of the disolvated organic phase complex of the type UO₂(NO₃). 2TAP and Pu(NO₃)₄·2TAP with U(VI) and PU(IV), respectively. On the contrary, the extraction of fission product contaminants such as¹⁴⁴Ce,¹³⁷Cs,⁹Nb.,¹⁴⁷Pr,¹⁰⁶Ru,⁹⁵Zr was almost negligible even at very high nitric acid concentrations in the aqueous phase indicating its potential application in actinide partitioning. The recovery of TAP from the loaded actinides could be easily accomplished by using a dilute sodium carbonate solution or acidified distiled water (0.01 mol · dm^–3 HNO₃) as the strippant for U(VI) and using uranous nitrate or ferrous sulphamate as that for Pu(IV). Radiation stability of TAP was adequate for most of the process applications.     

Synthesis and Characterization of Silver Sulfide Nanoparticles Containing Sol-Gel Derived HPC-Silica Film for Ion-Selective Electrode Application

Silver sulfide nanoparticles dispersed in sol-gel derived hydroxypropyl cellulose (HPC)-silica films have been successfully synthesized using H₂S gas diffusion method. This is the first attempt to produce silver sulfide nanoparticles using this technique. Ag₂S nanoparticles are generated through reaction of H₂S gas with AgNO₃ precursor dissolved in the HPC-silica matrix. Transmission electron microscope (TEM) and atomic force microscope (AFM) analysis reveal nanoparticles size distribution from 2.5 nm to 56 nm for H₂S gas exposed sample. The surface chemistry of Ag₂S nanoparticles and sol-gel derived HPC-silica matrix is confirmed by X-ray photoelectron spectroscopy (XPS). The negative shifts in the core-level XPS Ag (3d) binding energy of Ag₂S nanoparticles are attributed to Ag : S surface atomic ratio exhibited by these nanoparticles with varying processing conditions. Following processing and characterization, suitability of the present method to produce silver sulfide ion-selective electrode is demonstrated by depositing Ag₂S nanoparticles on a graphite rod. The high reponse function of the electrode is due to the presence of nanoparticles.     

Extractive—spectrophotometric determination of americium at trace levels with arsenazo-III

Americium(III) can be quantitatively extracted with 1 M diisoamylsulphoxide in Solvesso-100 from aqueous 0.02 M HNO₃—2.5 Al(NO₃)₃ solutions and, after dilution of the extract with ethanol and nitric acid, determined in the organic phase with arsenazo-III. The apparent molar absorptivity is 1.58 × 10⁵ l mol^-1 cm^-1 at 652 nm. The system obeys Beer's law within the range 0.1–1.6 μg Am ml^-1; 0.11 μg Am ml^-1 is determined with a reproducibility better than ±2%. Relatively large amounts of Ca(II), Cr(III), Fe (III), U(VI), Cl^-, NO₂^-, NO₃^- and F^- are tolerated. Interferences of Ce(IV), Pu(IV) and Th(IV) are eliminated by prior extraction with 2-thenoyltrifluoroacetone; only europium(III) interferes appreciably. Colour development is almost instantaneous and absorbances are virtually constant for 12 h.     

Paper chromatographic behaviour of alkali metal ions in phenol-containing solvents

Summary The chromatographic behaviour of all alkali metal ions in phenol saturated with 2M hydrochloric acid has been examined by centrifugal and ascending chromatography. Separation with centrifugal development is about one hundred times more rapid than that obtained by the ascending technique. The shortest separation time achieved in these studies, six minutes, shows that centrifugal chromatography promises to be a useful rapid technique for the separation of short-lived fracium isotopes from a mixture of other alkali metals and for the routine analysis of alkali metals. The different degree of solvation of the cations by phenol, depending upon ionic size, is considered to be mainly responsible for the observed selective distribution of the alkali metal ions on the chromatogram.     

Fundamentals of tandem mass spectrometry: a dynamics study of simple C−C bond cleavage in collision-activated dissociation of polyatomic ions at low energy

The loss of methyl radical in collision-activated dissociation (CAD) of acetone and propane molecular ions has been studied at low energy using a tandem hybrid mass spectrometer. Although the two processes are very similar chemically and energetically, very different dynamical features are observed. Acetyl ions from acetone ion are predominantly backward-scattered, with intensity maxima lying inside and outside the elastic scattering circle, confirming our previous observation that electronically excited states are important in low-energy acetone CAD. Ethyl ions from propane ion show a forward-scattered peak maximum at a nonzero scattering angle, which is consistent with generally accepted models for vibrational excitation and redistribution of energy before dissociation. Both processes demonstrate that CAD at low energy proceeds via small-impact-parameter collisions with momentum transfer. Comparison of the present results with higher energy CAD dynamics studies and earlier work leads to some tentative general conclusions about energy transfer in these processes.     

Absorption spectroscopic investigations involving 4f-4f transitions to explore the kinetics of complexation of Zn(II) with Pr(III)-glutathione complex

The kinetics of complexation of Zn(II) with Pr2(GSH)2.(H2O)4 1 (GSH-glutathione) to form Pr2(GSH)2Zn(H2O)6 complex 2 has been investigated at 30 degrees C by following the changes in the intensity (absorbance, molar absorptivity) and intensity (oscillator strength P and Judd-Ofelt-T(lambda) intensity) parameters in equimolar DMF-Water. In order to support kinetics data, the complex 1 and 2 have been synthesized and characterized by elemental analysis, IR and 1H NMR spectral analysis. Molecular weights of 1 and 2 determined by ebullioscopic and cryoscopic methods and preliminary molecular modeling experiments have helped in proposing most probable structures for 1 and 2. Kinetics showed first order dependence, in terms of concentration of Zn(II) and complex 1, on the rate of formation of complex 2. Generally, hypersensitive transitions (the transitions obeying /DeltaJ/ selection rules) were used in spectra-structure correlation studies. We have used the four 4f-4f transitions of Pr(III), which do not obey selection rules, yet are substantially sensitive to coordination changes, for kinetic study. The rate constants evaluated from individual 4f-4f bands are quite close hence supporting our observations on ligand mediated pseudohypersensitivity.     

Early-late, mixed-metal compounds supported by amidophosphine ligands

The sequential syntheses, structural characterisation and reactivity studies of a series of discrete early-late mixed-metal complexes supported by the unique amidophosphine ligand m-(But2CH)N(C6H4)PPh2L1 are described. This ligand was synthesised using a Schiff-base/ButLi protocol and the resultant lithium salt LiL1 found to adopt a tetrameric structure in the solid state in which both two-coordinate N-Li-N and eta6:eta6-arylLi metallocene bonding motifs are present. Reaction between HL1 and labile Pt(II) and Pd(II) chlorides formed MCl2(HL1)2 complexes 4 (M = Pt) and 5 (M = Pd) in which a weak N-H...pi(aryl) hydrogen bonding interaction was identified in the solid-state structure of 4. These compounds were found to be inert to transamination and protonolysis reactions with Ti amides and alkyls; instead, stepwise alkyl transfer from Ti to Pt, resulting in Pt(CH2SiMe3)2(HL1)2 6 was observed. Access to mixed-metal complexes was achieved using an early-metal-first approach. Reaction between the metalloligand TiCl2(L1)2 and labile Group 10 and group 9 compounds resulted in the formation of TiCl2(mu-L1)2PtCl2 8, TiCl2(mu-L1)2PtMe2 9, TiCl2(mu-L1)2PdCl2 10, TiCl2(mu-L1)2NiBr2 11, and [TiCl2(mu-L1)2RhCl(CO)]2 12. In the solid state, the Group 4/10 compounds 8, 9 and 10 adopt similar structures that exhibit both intramolecular But2C-H...Cl-Ti hydrogen bonding and arylNP pi-stacking interactions; this hydrogen-bonding interaction is conserved in solution. Unlike the above Group 4/10 complexes, the Ti-Rh complex 12 adopts a tetranuclear structure in the solid state that is stabilised by similar hydrogen-bonding and pi-stacking interactions. The Group 4/10 complexes were assessed as catalysts for olefin polymerisation and cross-coupling reactions. In combination with MAO, the mixed-metal complexes 8 and 10 were poor ethylene polymerisation catalysts and resulted in polymers of both high molecular weight and polydispersity. The Ti-Ni complex 11 formed oligomeric material only, while the mononuclear Ti metalloligand TiCl2(L1)2 gave the best results, showing low activity (6.14 kg mol(-1) bar(-1) h(-1)) and moderate polydispersity (12). The Ti-Pd complex 10 was assessed in arylamination and Suzuki-Miyaura reactions. While little or no catalytic activity was observed in arylamination reactions, 10 was found to effect Suzuki coupling between activated aryl bromides and phenylboronic acid at 80 degrees C. Unlike with TiCl2(L1)2, reactions between 8 and the reducing agents C8K or Mg led to intractable mixtures. However, the cyclic voltammetry of both compounds indicated that a reversible one-electron reduction process occurs at a similar potential (ca. -0.7 V) and was assigned to the formation of the monohalides TiCl(L1)2 and TiCl(mu-L1)2PtCl2. The reactivity of the metallocage TiCl(mu-L3)3Pt was also investigated. While reduction reactions were unsuccessful, the metallocage reacted with CO to form the Ti-Pt carbonyl, TiCl(mu-L3)3Pt(CO) 13. The X-ray crystal structure of 13 revealed that accommodation of CO at the Pt centre has caused the cage expansion and loss of agostic aryl-H...Pt interactions. Furthermore, reaction of TiCl(mu-L3)3Pt with excess MeI resulted in the formation of the Ti(IV)-Pt(II) complex trans-TiCl2(mu-L3)2(kappa1-L3MeI)Pt(Me)I.     

Estimation of natural thorium in low level effluents from processing plants

This is a report of simple estimations of natural thorium in low level effluents generated during the reprocessing of irradiated Th/ThO₂ rods for the recovery of²³³U. The method involved co-precipitation of thorium with ceric iodate at pH 1.29±0.01 and subsequent photometric determination. Conditions were optimised to eliminate the interferences of other ions present in the effluent. Approximately 15 mg each of phosphate, fluoride, and sulphate, 10 mg of iron, and 300 g zirconium did not interfere in the estimation of 2–5 g Th/100 ml of the effluent. Average thorium recovery was around 101.9%±2.6% when nearly 10 g of thorium were spiked.     

Extraction behaviour of uranium,zirconium and ruthenium with gamma-irradiated sulfoxides and tri-n-butyl phosphate

The extraction, scrubbing and stripping behaviour of uranium, zirconium and ruthenium with di-n-hexyl and di-n-octyl sulfoxides in Solvesso-100 and tri-n-butyl phosphate (TBP) in shell Sol-T irradiated by various gamma doses (0–169 Mrads) have been investigated. 2M HNO₃ was used for extraction and scrubbing and 0.01M HNO₃ for stripping purposes. Results indicate that the extraction of uranium with TBP increases and that with sulfoxide decreases with dose. This is reflected in their corresponding scrubbing percentages too. The stripping percentage of uranium with TBP decreases with dose while the reverse is the case with sulfoxide. The extraction of zirconium with TBP increases sharply with dose as compared to sulfoxides. The extraction scrubbing and stripping of ruthenium remain almost unaffected by dose both in the case of TBP and sulfoxides. These results lead to much higher overall decontamination factors for uranium with respect to zirconium as well as ruthenium with irradiated sulfoxides as compared to those with irradiated TBP.     

Ultraviolet-B radiation causes an upregulation of survivin in human keratinocytes and mouse skin

Understanding of the mechanism of ultraviolet (UV)-mediated cutaneous damages is far from complete. The cancer-specific expression of Survivin, a member of the inhibitor of apoptosis family of proteins, coupled with its importance in inhibiting cell death and in regulating cell division, makes it a target for cancer treatment. This study was designed to investigate the modulation of Survivin during UV response, both in vitro and in vivo. We used UV-B-mediated damages in normal human epidermal keratinocytes (NHEK) cells as an in vitro model and SKH-1 hairless mouse model for the in vivo studies. For in vitro studies, NHEK were treated with UV-B and samples were processed at 5, 15, 30 min, 1, 3, 6, 12 and 24 h after treatment. Our data demonstrated that UV-B exposure (50 mJ/cm2) to NHEK resulted in a significant upregulation in Survivin messenger RNA (mRNA) and protein levels. We also observed that UV-B exposure to NHEK resulted in significant (1) decrease in Smac/DIABLO and (2) increase in p53. For in vivo studies, the SKH-1 hairless mice were subjected to a single exposure of UV-B (180 mJ/cm2), and samples were processed at 3, 6, 12 and 24 h after UV-B exposure. UV-B treatment resulted in a significant increase in protein or mRNA levels (or both) of Survivin, phospho-Survivin and p53 and a concomitant decrease in Smac/DIABLO in mouse skin. This study demonstrated, for the first time, the involvement of Survivin (and the associated events) in UV-B response in vitro and in vivo in experimental models regarded to have relevance to human situations.