频域反射法光纤延时精密测量

本文提出了一种应用于光纤延时系统中实现光纤延时精密测量的新方法,用以提高光纤延时测量的精度和准确性.该方法以1064 nm激光调制信号作为光源,通过测量回波信号的幅值和相位信息得到被测通道的频率响应,采用快速傅里叶逆变换得到被测目标的延时信息,实现光纤延时测量.本文通过理论分析和延时测量实验对频域反射法与传统的时域测量方法进行对比,使用频域反射法在调制频率范围10—200 MHz,采样频率间隔0.5 MHz的实验条件下,实现了3.3 ps延时测量分辨率,并证明了该方法具有比时域方法更高的测量精度,测量结果的准确性更好.     

黑砷磷室温太赫兹探测器

由于太赫兹波与众多物质之间存在着丰富的相互作用,太赫兹技术在众多领域均有应用需求。因此,基于独特物理机制和优异材料特性的高灵敏度、便携式太赫兹探测器的研制刻不容缓。黑砷磷是一种新型二维材料,其带隙和输运特性随化学组分可调,在光电探测领域被广泛关注。目前基于黑砷磷的研究集中在红外探测方面,而对于太赫兹探测的应用未见报道。本文介绍了一种基于黑砷磷的天线耦合太赫兹探测器。实验结果表明,在探测过程中存在两种不同的探测机制,并且两者之间存在竞争关系。通过改变黑砷磷的化学组分可以定制不同的探测机制,使其达到最优响应性能。在平衡材料带隙和载流子迁移率的情况下,探测器实现了室温下对0.37 THz电磁波的灵敏探测,其电压响应度和噪声等效功率分别为28.23 V/W和0.53 nW/Hz1/2。     

Design of Enhanced Catalysts by Coupling of Noble Metals (Au,Ag) with Semiconductor SnO2 for Catalytic Reduction of 4‐Nitrophenol

The reduction of 4‐nitrophenol (Nip) into 4‐aminophenol (Amp) by NaBH₄, which is catalyzed by both binary and ternary yolk–shell noble‐metal/SnO₂ heterostructures, is reported. The binary heterostructures contain individual Au or Ag nanoparticles (NPs) and the ternary heterostructures contain both Au and Ag NPs. The Au@SnO₂ yolk–shell NPs are synthesized via a silica seeds‐mediated hydrothermal method. Subsequently, the Au@SnO₂@Ag and Au@SnO₂@Au yolk–shell–shell (YSS) NPs are synthesized, whereby SnO₂ is located between the Au and Ag NPs. The morphology, composition, and optical properties of the as‐prepared samples are analyzed. For the binary heterostructures, the rate of the reduction reaction increases with decreasing particle size. The catalytic results demonstrate the synergistic effect of Au and Ag in the ternary metal–semiconductor heterostructures, which is beneficial to the catalytic reduction of Nip into Amp. Both the binary and ternary heterostructures exhibit significantly better catalytic performances than the corresponding bare Au and Ag NPs. It is envisaged that the current synthesized strategy will promote further interest in the field of bimetal NP‐based catalysis.     

Wide-band circular polarization-keeping reflection mediated by metasurface

In this paper,we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces.The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix.A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators.Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98%over the frequency range from 9.2 GHz to 17.7 GHz for both incident left-and right-handed circularly polarized waves.Under oblique incidence,the bandwidth increases as the incident angle varies from 0°to 80°. Moreover,the co-polarization reflection is independent of the incident azimuth angles.     

Subluminal and superluminal propagation in Er<Superscript>3+</Superscript> doped fiber Bragg grating

The method to pump the FBG written into an Er³⁺-doped optical fiber is proposed to decrease or increase the group velocity of a probing pulse based on the fact that a pump-induced process changes the refractive index and dispersion associated with the ⁴I_15/2-⁴I_13/2 transition in Er³⁺-doped optical fiber. The system equations are derived. The group velocity modification is numerically demonstrated and discussed with the effects of an optical pump power, fiber Bragg grating length, doping concentration of Er³⁺ ions, and modulation amplitude of the grating.     

Method for improving the resolution and accuracy against birefringence dispersion in distributed polarization cross-talk measurements

We present a novel method for improving the spatial resolution and amplitude accuracy of distributed polarization cross-talk measurements in a polarization maintaining (PM) fiber against its birefringence dispersion. We show that the broadening of measured polarization cross-talk peaks caused by birefringence dispersion can be restored by simply multiplying the measurement data with a compensation function. The birefringence dispersion variable in the function can be obtained by finding the widths of measured cross-talk envelopes at known distances along the fiber. We demonstrate that this method can effectively improve spatial resolution and amplitude accuracy of the space-resolved polarization cross-talk measurements of long PM fibers.     

Evolution of cooperation among mobile agents

We study the effects of mobility on the evolution of cooperation among mobile players, which imitate collective motion of biological flocks and interact with neighbors within a prescribed radius R. Adopting the the prisoner’s dilemma game and the snowdrift game as metaphors, we find that cooperation can be maintained and even enhanced for low velocities and small payoff parameters, when compared with the case that all agents do not move. But such enhancement of cooperation is largely determined by the value of R, and for modest values of R, there is an optimal value of velocity to induce the maximum cooperation level. Besides, we find that intermediate values of R or initial population densities are most favorable for cooperation, when the velocity is fixed. Depending on the payoff parameters, the system can reach an absorbing state of cooperation when the snowdrift game is played. Our findings may help understanding the relations between individual mobility and cooperative behavior in social systems.     

三维无网格法中权函数影响半径的优化

从函数逼近的角度建立三维无网格法中权函数影响半径的优化计算模型,针对一次基、二次基情形求解该模型.分析不同影响半径下函数的逼近误差,以及计算量、条件数等因素对无网格法计算性能的影响,结合数值试验,确认给出的权函数影响半径是有效、可靠、综合最优的.     

高性能激光全息防伪标识特性参数测量系统

提出了一种高性能激光全息防伪标识参数的检测方法,利用同一束光在分束器分成的反射光和透射光光强度比例恒定的性质,实时探测衍射方向光强和标识入射光强值,通过一维线性扫描实现激光全息防伪标识衍射效率和信噪比的自动测量。实验数据表明：入射光强测量值相对误差不超过0．29％;衍射效率及信噪比的测量值最大相对误差分别不超过0．81％和2．0％,比第一代检测仪采用的方法测量精度提高近一倍。该方法降低了对光源稳定度的要求,大大降低了激光器的成本,有利于测量仪器的推广。     

Design and end chamfer simulation of PEFP beam line curved dipole magnets

The design, fabrication and field measurement of 11 DC curved dipole magnets for the PEFP Beam Line have been completed. In this paper, a design method for a complex end chamfer using OPERA-3D is proposed. The conventional method for estimating chamfer shape is extended and applied to a curved dipole magnet by a coordinate transformation. Using the interface with CAD software, the complex end chamfer is modeled and fully determined by 3D simulation to meet the field uniformity requirement. The magnetic field measurement results are in good agreement with the simulation. The design considerations, field simulation results, end chamfer development process and measurement results are presented in detail.