Improved space time prewhitener for linear frequency modulation reverberation using fractional Fourier transform

This letter presents an improved space time prewhitening method for linear frequency modulation (LFM) reverberation. The proposed method transforms the reverberation to fractional Fourier domain to whiten using fractional Fourier transform. The linear varying frequency in LFM reverberation is focused on a stationary frequency, and the adjacent block signal is used as the reference signal of prewhitening. Finally, experiment results with real reverberation data verify that the proposed method improves the detection performance of active sonar in shallow sea significantly.     

可变色的ZnSe:Er3+ MIS发光二极管

本文首次利用高场和低场激发下的有效发光中心,设计和制备了随外加电压极性改变而变色的ZoSe:Er3+ MIS发光二极管。这种发光二极管在正向电压激发下得到蓝色发光,而在反向电压激发下得到绿色发光。     

基于数字粒子图像测速的水雾粒径测量算法及实验

针对利用传统数字粒子图像测速（DPIV）法测量水雾粒径时粒子影像拉长对测试结果的影响,提出了基于DPIV建立的改进图像法（IIM）。设计了水雾粒径测量试验系统,对细水雾进行实时测试,并对比了采用本文算法与直接等效法测试水雾粒径子半径的差异。结果表明：采用本文的IIM得到的测试结果更为准确。通过最小二乘法对粒径分布进行拟合,发现对数正态分布函数和威布尔函数都可以较好地描述粒径分布。     

Combining Metabolic Alkyne Labeling and Click Chemistry for Secretome Analysis of Serum-Containing Conditioned Medium

Main observation and conclusion Bioorthogonal click chemistry has emerged as a powerful tool for the specific modification of proteins in complex mixtures.Metab...     

同步辐射硬x射线衍射增强成像新进展

对于相位衬度成像的实验方法研究及其在医学、材料等领域的应用研究已成为国际上研究的热点.衍射增强成像方法(DEI)作为其中的一种方法通过测量相位衬度的一阶导数而成像.在北京同步辐射装置(BSRF)4W1A束线上，对衍射增强成像方法进行了研究，并对一系列生物医学样品及材料样品成像，得到了非常清晰的相位衬度图像. 关键词： 衍射增强成像 同步辐射 硬x射线     

Laser output of radial-slab solid-state laser

In this letter, numerical simulation and experimental study of a radial-slab solid-state laser are presented. The laser includes four crossing-slabs pumped by four Xe flashlamps. The numerical simulation of coherent intensity in the near field and the far field indicates that the laser with the structure can improve the quality of output beam compared with incoherent beam combination. The radial-slab solid-state laser is fabricated, and initial experiments are carried out at a pulse repetition of 1 Hz. Nine beams in the near field and one combined beam in the far field are obtained in our initial experiment. The experimental results are consistent with the numerical analysis in the coherent condition. The results show that coherent beam combination is obtained by this laser.     

Extended breakdown of Simpleman approximation

In this letter, we solve three-dimensional time-dependent Newton equations for atoms interacting with a ten-cycle elliptically polarized laser pulse. The ionized electron momentum distributions show a tilt angle between the distribution density peak and the main polarization axis. The tilt angle’s behavior changes with an increasing laser intensity. We show that this behavior change is directly related to the release time of the electron from the atom.     

An analog of double electromagnetically induced transparency with extremely high group indexes

An asymmetric metamaterial exhibiting an analog of double electromagnetically induced transparency(EIT) in the middle-infrared region is reported.The metamaterial consists of two-layered arrays of Ushaped rings embedded in a medium,with the lower layer rotated by 90°.Our simulations demonstrate that both maximum group indexes are extremely high at the two EIT-like positions.The group index reaches about thrice the currently reported maximum value at the high-frequency EIT-like position.The transmittance at the two transparency positions also possesses extremely high Q factors,which is conducive to controlling the propagation of electromagnetic waves.     

Fabrication of rhenium Josephson junctions

Rhenium is a superconductor with a relatively weak tendency to oxidize, which is advantageous in superconducting quantum circuit and qubit applications. In this work, Re/A1-A1Ox/Re Josephson tunnel junctions were fabricated using a selective film-etching process similar to that developed in Nb trilayer technology. The Re films had a superconducting transition temperature of 4.8 K and a transition width of 0.2 K. The junctions were found to be highly reproducible using the fabrication process and their characteristics had good quality with a low leakage current and showed a superconducting gap of 0.55 meV.     

COF-42:一种理想的锂硫电池锚定材料

寻找理想的锚定材料抑制穿梭效应是锂硫电池面临的重要问题之一.本文采用密度泛函方法,研究了四种共价有机框架COFs材料(COF-1,CTF-1,COF-LZU1和COF-42)和硫锂化合物(Li_2S_n)的作用机理.通过分析吸附构型、吸附能、电子密度差分以及态密度等性质,发现COFs材料与硫锂化合物的化学吸附作用主要源于COFs表面极性N和O原子与Li之间的静电作用力.在COF-42/Li_2S_n吸附构型中,N和O原子与Li之间形成双重类离子键;电子密度差分和Bader电荷差分表明,与其他COFs材料相比,Li_2S_n和COF-42之间电荷转量最多,因此,COF-42具有最强的锚定作用.比较Li_2S_n和COF-42以及常用电解质分子1,3-二氧戊环(DOL)和二甲氧基乙烷(DME)的吸附能,证明COF-42可以抑制电解质分子的溶剂化作用; COF-42与COF-1,CTF-1和COF-LZU1相比较,具有良好导电性.因此,COF-42可能是一种理想的锂硫电池锚定材料.