离聚体溶液

离聚体（ionomer）是指含离子基团低于15mol％的聚合物，这些离子基团能聚集成多重离子对[1]或离子簇[2-6]，使大分子链发生物理文联形成聚集体，导致性质起很大变化。例如常温下因物理交联而具有良好弹性，而高温时物理交联被破坏而具有流动性，所以离聚体能制成热塑性弹性体。由于物理交联存在，离聚体不能轻易溶于非极性溶剂中；由于离子含量低，又不易溶于水或其它强极性溶剂中．因此，尽管离聚体固体的研究和应用已有40多年的历史，但有关溶液研究的报导到70年代末才见发表[7-9]，近10年取得较大进展，其独特的粘度关系使人们考虑利用…     

反相高效液相色谱法分析无机阴离子研究

本文研究了提高ＲＰ－ＨＰＬＣ测定无机阴离子的选择性的方法，设计了利用对离子试剂和背景试剂兼作ｐＨ调节剂，建立了几种分离分析系统和实际样品分析方法。     

液膜法分离钒(Ⅳ)的研究

本文用P204-兰113A-煤油组成的滤膜体系处理钒(Ⅳ)的溶液,并考察了表面活性剂、载体、外相pH值、内相酸度、起始钒(Ⅳ)浓度以及乳水比等因素对分离的影响。     

Quantitative analysis of nicotinic acid, nicotinamide and 3-cyanopyridine in industrial effluent by high performance liquid chromatography

A rapid and reliable high performance liquid chromatographic (HPLC) method for the simultaneous determination of heterocyclic compounds, namely nicotinic acid, nicotinamide, and 3-cyanopyridine, in industrial effluent is described. A Φ4.6 mm × 150 mm, 5 μm C-18 reversed phase stationery phase, and a methanol-acetonitrile-water tertiary mobile phase (20:20:60 v/v) were used for separation. The detection wavelength of a diode array (DAD) was set at 216 nm with a bandwidth of 16 nm. Phenol was used as an internal standard. The regression equations revealed a linear relationship between the concentration of the analytes injected and the peak area detected by DAD. The limits of detection (S/N = 3) ranged from 0.70 to 1.18 mg L⁻¹, the recoveries ranged from 87% to 102% and the precision expressed as % RSD intra-day and inter-day varied from 0.9 to 3.9 and 1.2 to 5.6, respectively. This method is rapid, sensitive and suitable for the monitoring of nicotinic acid, nicotinamide, and 3-cyanopyridine in effluent of related pharmaceutical manufacturing plants.     

Capillary Electrophoresis of the Active Ingredients of Dioscorea bulbifera L. and its Medicinal Preparations

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of epicatechin, isovanillic acid, vanillic acid and myricetin in Dioscorea bulbifera L. and its medicinal preparations. The effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time were investigated. Under optimum conditions, the analytes could be separated in a 40 mmol L^?1 borate buffer (pH 8.7) within 15 min. A 300 μm diameter carbon disk electrode has a good response at + 0.95 V (vs. SCE) for all analytes. The response was linear over three orders of magnitude with detection limits (S/N = 3) ranging from 3.0 × 10^?8 g mL^?1 to 1.0 × 10^?7 g mL^?1. The method has been successfully applied to the analysis of real samples.     

Rapid determination of acetone in human blood by derivatization with pentafluorobenzyl hydroxylamine followed by headspace liquid-phase microextraction and gas chromatography/mass spectrometry

In the current work, a simple, rapid, accurate and inexpensive method was developed for the determination of acetone in human blood. The proposed method is based on derivatization with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA), followed by headspace liquid-phase microextraction (HS-LPME) and gas chromatography/mass spectrometry (GC/MS). In the present method, acetone in blood samples was derivatized with PFBHA and acetone oxime formed in several seconds. The formed oxime was enriched by HS-LPME using the organic solvent film (OSF) formed in a microsyringe barrel as extraction interface. Finally, the enriched oxime was analyzed by GC/MS in electron ionization (EI) mode. HS-LPME parameters including solvent, syringe plunger withdrawal rate, sampling volume, and extraction cycle were optimized and the method reproducibility, linearity, recovery and detection limit were studied. The proposed method was applied to determination of acetone in diabetes blood and normal blood. It has been shown that derivatization with HS-LPME and GC/MS is an alternative method for determination of the diabetes biomarker, acetone, in blood samples.     

有机-无机杂化凝胶法合成YAG∶Ce~(3+)荧光粉的包膜及其稳定性

本文以金属硝酸盐为原料,柠檬酸为配位剂的有机-无机杂化凝胶法来合成掺杂三价铈离子的钇铝石榴石荧光粉,采用X-射线衍射法研究了杂化凝胶在煅烧过程中的相转变机制。结果表明:杂化凝胶在煅烧过程中可以通过两条途径形成Y3Al5O12(YAG)相:一是由无定形Y2O3和Al2O3直接向YAG相的一步相转变;二是由无定型Y2O3和Al2O3经由YAlO3(YAP)和γ-Al2O3向YAG相的两阶段相转变,在900℃得到结晶性好的纯YAG∶Ce3 荧光粉,其最大激发波长为459nm,最大发射峰波长为550nm;在荧光粉表面包覆氧化铝和氧化镧,将使荧光粉的荧光强度稍有降低,但对荧光粉的稳定性有很好的改进作用。     

常见饮料中痕量铝的分光光度法研究

新试剂5-溴水杨基荧光酮可在pH5.5～6.8的六次甲基四胺缓冲溶液中,与铝,溴化十六烷基吡啶形成稳定的红色三元配合物。最大吸收波长约为568nm,摩尔吸光系数高达1.7×10~5L mol~(-1)·cm~1,常见金属离子很少干扰。据此,建立了测定微量铝的方法。其线性范围为0～6μg/25ml回收率在96％～103％之间。本文测定了常见饮茶,饮料及饮水中的微量铝。     

壳聚糖／聚丙烯酸聚电解质复合物膜对水／有机液体系的渗透汽化性能

以壳聚糖和聚丙烯酸为原料制备了聚电解质复合物膜，并对其分离水／乙醇体系的渗透汽化特性和浓度，温度，化学组成等因素的影响进行了研究，发现后处理方法对复合物膜的分离性能影响很大。同时对其它水／有机液体系，该膜也具备优异的分离性能。