非晶态合金Fe80P20局域结构和性质的量子化学研究

利用原子簇模型Fe_4P简化了非晶态合金Fe_(80)P_(20)的局域结构,设计了四方锥、三角双锥、四面体及平面五边形等十几种构型,对其二、四重态分别进行密度泛函(DFT)优化计算,经过频率验证,获得五种稳定构型。从所得优化构型的键长和键级,可以发现原子簇Fe4P较好地反映了非晶态合金Fe_(80)P_(20)的局域结构。考察了各构型间的过渡转化情况,发现二重态构型的稳定性要好于四重态。分析各构型的能量、成键及电子转移情况,发现与P原子成键的Fe原子个数对这些性质影响较为明显。与P原子成键的Fe原子个数越多,体系的能量就越低,越容易存在；P原子的得电子能力随着与其成键Fe原子个数增多而减少,甚至会将失去自身电子转移到金属原子上。同时通过3d轨道布居数,讨论了原子簇的空穴数及磁学性质。     

铁分子Fe2的自旋极化效应

采用密度泛函方法(B3P86)对 Fe_2分子结构进行了优化.计算结果中未观察到自旋污染,基态波函数与高态波函数并未混杂,结果表明,Fe_2中有8个未配对电子,这些电子空间分布不同和自旋平行产生的自旋极化效应,使 Fe_2能量最低.计算结果表明,Fe_2分子的基态是~9∑_g~ ,并非~7Δ_u,进而表明 Fe_2的自旋平行效应比电子自旋配对效应要强.计算得到该分子基态的二阶、三阶和四阶力常数分别为1.4115×10~(-2)aJ/nm~2、-37.1751×10~3aJ/nm~3和 98.7596×10~4aJ/nm~4；光谱数据ω_eχ_e、B_e、α_e分别为0.3522、0.0345、 0.4963×10~(-4)cm~(-1)；离解能为3.5522eV,平衡键长为0.2137nm,振动频率为292.914cm~(-1)；并得到了 Murrel-Sorbie 函数.     

Sensitivity of depolarized lidar signals to cloud and aerosol particle properties

Measurements from depolarized lidars provide a promising method to retrieve both cloud and aerosol properties and a versatile complement to passive satellite-based sensors. For lidar observations of clouds and aerosols, multiple scattering plays an important role in the scattering process. Monte Carlo simulations are carried out to investigate the sensitivity of lidar backscattering depolarization to cloud and aerosol properties. Lidar parameters are chosen to be similar to those of the upcoming space-based CALIPSO lidar. Cases are considered that consist of a single cloud or aerosol layer, as well as a case in which cirrus clouds overlay different types of aerosols. It is demonstrated that besides thermodynamic cloud phase, the depolarized lidar signal may provide additional information on ice or aerosol particle shapes. However, our results show little sensitivity to ice or aerosol particle sizes. Additionally, for the case of multiple but overlapping layers involving both clouds and aerosols, the depolarized lidar contains information that can help identify the particle properties of each layer.     

脉冲激光偏振方向对氮分子高次谐波的影响——基于含时密度泛函理论的模拟

采用含时密度泛函方法,结合赝势模型和电子交换相关作用的广义梯度近似,模拟了氮分子在超强飞秒激光脉冲作用下的高次谐波产生现象,并研究了激光脉冲偏振方向对氮分子高次谐波的影响.结果表明氮分子的高次谐波谱具有典型原子谐波谱的特征;谐波谱强度随着θ(激光偏振方向与分子轴向夹角)的增大而减小.这与J.Itatanl在Nature上报道的实验结果基本一致.     

SmartPhantom--an fMRI simulator

Many informatics tools have emerged to process the voluminous and complex data generated by functional magnetic resonance imaging (fMRI). The interpretation of fMRI exams is largely determined by these tools. However, their performance is hard to evaluate because there is no independent means of calibration. A novel fMRI calibration system called SmartPhantom has been developed to simulate functional blood oxygen level dependent (BOLD) imaging. SmartPhantom contains a quadrature radio frequency coil, comprising two perpendicular planar loops that can be externally activated or deactivated. The system is able to produce reasonably uniform signal enhancements in a calibration sample surrounded by the two loops during an MRI scan. The enhancement is controlled well in both magnitude and predefined timing and produces BOLD-like signals. Characteristics of SmartPhantom are discussed in detail, followed by a comparison of fMRI informatics tools. Two fMRI data sets are acquired with the SmartPhantom. One with high signal-to-noise ratio provides the calibration. Another with lower SNR is input into three software packages (BrainVoyager, FSL and Statistical Parametric Mapping 2) for data preprocessing and statistical analysis. Results from the three packages are compared in both sensitivity of detecting the activation and correlation between the predicted activation and calibration.     

Impact of interstitial air holes on a wide-bandwidth rejection filter made from a photonic crystal fiber

We have investigated the spectral properties of a band rejection filter made with a long-period fiber grating written in photonic crystal fiber that has interstitial air holes. Experiments showed that only one mode was coupled strongly to the fundamental core mode over a 600 nm spectral range. The central wavelength of the filter could be tuned over that range without being appreciably affected by any other mode. By using the multipole method, we found that the interstitial air holes of the photonic crystal fiber played a critical role in limiting the number of modes that could strongly interact with the fundamental mode and in obtaining well-separated resonance peaks. Excellent agreement between theory and experiment was obtained.     

分立式与分布式光纤传感关键技术研究进展

光纤传感技术已广泛应用于航空航天、石油化工、电子电力、土木工程、生物医药等领域,其技术形式主要体现为分立式和分布式.分立式光纤传感技术利用光纤敏感器件作为传感器来感知被测参量的变化,光纤作为光信号的传输通道连接光纤传感器及后端的解调装置;分布式光纤传感系统基于光纤瑞利散射、拉曼散射或布里渊散射等光学效应,利用光纤本身作为传感器,可对沿途的光信号进行大范围、长距离传感.本文介绍了分立式与分布式光纤传感中主要关键技术的研究进展,并对未来的研究和发展方向进行了探讨.     

三角形石墨烯量子点阵列的磁电子学特性和磁输运性质

基于密度泛函理论的第一性原理计算方法,研究了三角形石墨烯纳米片用不同连接方式拼接而成的四种一维量子点阵列(1D QDAs)的磁电子学性质和磁输运性质.结合能计算表明所有1D QDAs是非常稳定的.特别是研究发现1D QDAs的电子和磁性质不仅依赖于磁性态,也明显依赖于连接方式,如在无磁态时,不同量子点阵列(QDAs)可为金属或窄带隙半导体.在铁磁态时,不同QDAs能为半金属(half-metal)或带隙不同的双极化磁性半导体.而在反铁磁态时,不同QDAs为带隙不等的半导体.这些结果意味着连接方式对有效调控纳米结构电子和磁性质扮演重要的角色.1D QDAs呈现的半金属或双极化磁性半导体性质对于发展磁器件是非常重要的,而这些性质未曾在本征石墨烯纳米带中出现.同时,我们也研究了一种阵列的磁器件特性,发现其拥有完美的(100%)单或双自旋过滤效应,尤其是呈现超过109%的巨磁阻效应.     

硼原(离)子内壳激发高自旋态能级和辐射跃迁

采用Rayleigh-Ritz变分方法计算了B原子(离子)内壳层激发高自旋态(~(4,5,6)L,L=S,P)里德伯系列的能量和精细结构劈裂,利用截断变分方法改进非相对论能量,并利用一阶微扰理论计算了相对论能量修正和质量极化效应修正,利用屏蔽的类氢公式计算了量子电动力学效应和高阶相对论效应,从而得到了高精度的组态能量.利用精确计算的波函数,计算了这些高自旋态的电偶极辐射跃迁波长、振子强度和辐射跃迁概率.通过长度规范和速度规范计算的振子强度的一致性证明了本文计算的波函数是精确的.相比其他理论计算结果,本文计算的高自旋态的能级及跃迁波长数据与实验数据符合得更好.对于一些高位的内壳层激发高自旋态,相关的能级和跃迁数据为首次报道,本文的计算结果对相关实验光谱谱线标定具有重要意义.     

不均匀性:非晶合金的灵魂

非晶合金,即金属玻璃,是一类特殊的由基本化学元素组成的非晶态物质,由于其独特的微观组织结构,展现出了不同于传统晶态合金材料的特殊物性,而成为高性能材料应用领域的重要一员.由于非晶合金的结构无序性,且当前精确表征其微观结构的实验手段缺乏,相应的理论模型也不完善,人们对非晶合金中一些基础物理问题的认识尚且不足,无法形成基本的理论框架来精确地描述其物性产生的微观机理.因而,当前非晶合金研究的核心问题可以概括为:如何建立以微观特征或结构为基础的基本理论框架,准确地概括非晶合金物性的微观机理.在过去几十年里,针对非晶合金的大量研究表明,在非晶合金长程无序的特征中,隐藏着本征的不均匀性和有序,且这些不均匀性的特征与材料物性有着密切的关联,使得建立以不均匀性特征为基础的理论框架成为可能.本文从非晶合金微观特征的不均匀性包括静态不均匀性和动态不均匀性的视角出发,概括性地总结了非晶合金材料与物理研究中取得的丰硕成果,及当前需要关注的重要科学问题,并针对未来可能的研究模式进行了展望.